• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.120-127
• /
• 2020

This study examined the operation of a pressure gauge for measuring the internal pressure of a barrel. During the ammunition performance evaluation test, the internal pressure of the barrel was measured mainly using a copper crusher gauge. The internal piezo gauge (IPG) was used to replace the pressure measurement method, and the test results were analyzed to verify the operability of the IPG. For verification, actual shooting test data were used, and a t-test was used to analyze the results. The 155MM KH179 and M119 series propellant were used for the test equipment and ammunition. The results confirmed that there was no difference between the mean values of the two data results at a significance level of 5% for the data values between the copper gauge and the IPG. The use of the IPG was verified by replacing the existing copper gauge to measure the internal pressure of the barrel, and it was confirmed that the application width could be widened in terms of diversity of test measurement methods. Based on the results of this test, it can be applied to the compression measurement test of various types of ammunition in addition to the propellant charges.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.57-66
• /
• 2019

Recently, as a part of the production of spatial information by smart cities, three-dimensional reproduction of structures for reverse engineering has been attracting attention. In particular, terrestrial LiDAR is mainly used for 3D reproduction of structures, and 3D reproduction research by UAS has been actively conducted. However, both technologies produce blind spots due to the shooting angle. This study deals with vertical structures. 3D model implemented through SfM-based image analysis technology using UAS and reproducibility and effectiveness of 3D models by terrestrial LiDAR-based laser scanning are examined. In addition, two 3D models are merged and reviewed to complement the blind spot. For this purpose, UAS based image is acquired for artificial rock wall, VCP and check point are set through GNSS equipment and total station, and 3D model of structure is reproduced by using SfM based image analysis technology. In addition, Through 3D LiDAR scanning, the 3D point cloud of the structure was acquired, and the accuracy of reproduction and completeness of the 3D model based on the checkpoint were compared and reviewed with the UAS-based image analysis results. In particular, accuracy and realistic reproducibility were verified through a combination of point cloud constructed from UAS and terrestrial LiDAR. The results show that UAS - based image analysis is superior in accuracy and 3D model completeness and It is confirmed that accuracy improves with the combination of two methods. As a result of this study, it is expected that UAS and terrestrial LiDAR laser scanning combination can complement and reproduce precise three-dimensional model of vertical structure, so it can be effectively used for spatial information construction, safety diagnosis and maintenance management.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2020

The main purpose of protective facility for small military unit is to provide the protection of not all the weapons system but the near-miss bullet in Korean army. In particular about the small caliber bullets, especially KM80 in Korea, there were many studies that both of the experiential and structural design methods dose not reflect enough the military threat. For that reason, a new equation to calculate effective anti-piercing depths for RC slabs against small caliber bullets is proposed in earlier research with actual shooting test. But, the test only considers the strength of concrete without the thickness of concrete, types of aggregate, the angle of yaw of bullet, high-strength concrete, etc. Therefore, this study evaluated the ballistic resistance performance by thickness and proportion of magnetic aggregate of concrete. As a result, we identified two major statistical estimations that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage and the thickness and proportion of magnetic aggregate of concrete dose not effect on the protection ability of concrete structure.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.715-728
• /
• 2009

The Enterprise Service Bus based on Java Business Integration is an web service standard and one of the methods for implementing distribution channels of Service Oriented Architecture. Consisting of open source group, extensive venders and users, the ESB based JBI has the problems of ineffectiveness as well as advantages of extensibility of service plug-in. That is, in case users need to use Service plug-in, manual connection of packaging process and sequential distribution method is required. This study, therefore, proposes as a way of trouble-shooting the user-oriented component deployment tool which can manage entire process for deploying The ESB middleware platform to Service unit. At the same time, this study elicited the requirements based on issues of JBI-based ESB and has developed the modeling property, packaging, distribution and evaluation thru Schema analysis of JBI-compatible component. Using the deployment tool this study proposed, users will be able to perform and manage the whole deploying process without additional manual work for connecting component. Not only it is expected that interface based on Graphic User Interface provide usability and convenience but they can also minimize the errors rate through component and route validity verification function provided in deployment tool.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.147-153
• /
• 2021

The purpose of this study is to establish strategic suggestions for the direction of the drone-related business by Gyeonggi-do through a survey on the operation and actual conditions of the drone geospatial information service business experienced by Gyeonggi-do civil servants. For this purpose, as a result of surveying the demand survey of 219 people in charge of drone field work, it was analyzed by dividing it into four categories: technology-based operation support, business discovery and support, legal and institutional support, and education and public relations. As an improvement measure, technology-based operation support is to secure service operation efficiency by establishing a dedicated manpower and a dedicated organization and securing drone-related experts.The plan for improvement of project discovery and support is as follows. 1) The government proactively discovers prior research projects for project discovery and support; 2) Legal and institutional support requires support services for simplification of administration such as drone geospatial data shooting schedules and permits, 3) legal and institutional review on improving the scope and restrictions for using drone geospatial data. In the field of education and publicity, it is necessary to operate an education program on the overall operation of drones, and to conduct seminars for each field and use, and to seek activation methods through practical application guidelines for the application process and system. The limitation of this study is that the survey subjects are related to Gyeonggi-do, and in the future, survey analysis through a wide range of participants is required.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.5
• /
• pp.379-396
• /
• 2021

Background: Trigeminal neuralgia (TN) is characterized by brief, unilateral, sharp, stabbing, and shooting pain of the fifth cranial nerve. The objective of this systematic review with meta-analysis was to determine the effect of medications compared to placebo in adult patients with TN. Methods: Review authors identified randomized placebo-controlled trials (RCTs) from PubMed, Web of Science, Cochrane, and EMBASE up to February 2021. We assessed the inclusion and exclusion criteria as well as the risk of bias of the studies based on the Cochrane Handbook. A total of 324 unduplicated references were scanned independently and reduced to eight relevant RCTs, with 89 patients included. Medications investigated included oral carbamazepine, subcutaneous sumatriptan, lidocaine (intranasal, 8% spray on the oral mucosa or intravenous), buprenorphine (ganglionic local opioid analgesia), and oral Nav1.7, a selective sodium channel blocker. Results: Meta-analyses showed that overall patients receiving lidocaine reported a significantly lower post-treatment intensity of pain -3.8 points on a 0-10 scale (95% Cl = -4.653 to -2.873; P < 0.001). Patients who received lidocaine were 8.62 times more likely to have pain improvement than patients on placebo (P < 0.001). In one RCT, patients receiving oral carbamazepine showed a significant improvement in pain intensity of -32% compared to the placebo (P < 0.001). In one trial, patients receiving 3 mg subcutaneous sumatriptan had a significantly lower intensity of pain on average -6.1 points on a scale of 0-10 compared to placebo (P < 0.001) and a significant improvement in pain intensity of -75% compared to the improvement in the placebo group (P < 0.001). Patients who received subcutaneous sumatriptan were 10 times more likely to have pain improvement than those who received placebo (P = 0.001) in one study. Due to the unclear/high risk of bias and small sample size, the quality of the evidence for lidocaine in the treatment of TN was low. Conclusion: Further studies are needed for carbamazepine, sumatriptan, buprenorphine, and oral Nav1.7 sodium channel blockers, as only one study reported outcomes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.587-593
• /
• 2019

The field of geospatial information is rapidly changing due to the development of sensor and data processing technology that can acquire location information. And demand is increasing in various related industries and social activities. The construction and utilization of three dimensional geospatial information that is easy to understand and easy to understand can be an essential element to improve the quality and reliability of related services. In recent years, 3D laser scanners are widely used as 3D geospatial information construction technology. However, 3D laser scanners may cause shadow areas where data acquisition is not possible when objects are large in size or complex in shape. In this study, 3D model of an object has been created by acquiring oblique images using an unmanned aerial vehicle and processing the data. The study area was selected, oblique images were acquired using an unmanned aerial vehicle, and point cloud type 3D model with 0.02 m spacing was created through data processing. The accuracy of the 3D model was 0.19m and the average was 0.11m. In the future, if accuracy is evaluated according to shooting and data processing methods, and 3D model construction and accuracy evaluation and analysis according to camera types are performed, the accuracy of the 3D model will be improved. In the point cloud type 3D model, Cross section generation, drawing of objects, and so on, it is possible to improve work efficiency of spatial information service and related work.

• Trans-
• /
• v.11
• /
• pp.37-63
• /
• 2021

This paper focused on documentaries and for specific places and described the documentary shooting methodology from the perspective of a Cinematographer. 'Old Seoul Station' and 'DSME' (DAEWOO Shipbuilding & Marine Engineering Co., Ltd.) are monumental spaces that reflect the value of Korea modernization and are shared by Koreans' collective memories, unconsciousness, and unique feelings for the place. 'Old Seoul Station' has changed its place identity to a new space called "Culture Station Seoul 284." 'DSME' is a large-scale industrial complex that still functions actively, and it is like an organism that seeks to change according to changes in its industrial structure. and observe and record images of space related to place identity and the people related to it. It shows the construction of staring into a space in a particular place and continuously recording and placing moments of experience, such as the appearance of people working and resting. If it is not recorded through this, it allows us to see intangible narratives related to volatile place identity, and enables specific place experiences through theaters. This study focuses on production theory based on examples of documentary filming methods for these specific places.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.705-713
• /
• 2021

Because the cage assembly serves as the launch platform, an accurate aim is essential to ensure shooting accuracy for the target. On the other hand, the abnormal rotation of the cage due to the directional errors of the K-MLRS has continuously caused quality problems. The quality problem of weapon systems may have a negative impact on the military's power loss. In this study, improvement plans were derived by examining the defects and analyzing the directional errors of the K-MLRS launcher. In addition, all possible causes of directional errors were derived from the flow diagram for cage directionality. Based on the results, the defense design through the software program was intended to prevent the loss of direction. Through this study, the signal error of the resolver was improved by preventing unspecific signals in the data. Furthermore, the directional judgment method was improved to minimize the impact of data distortion. Lastly, directional storage and verification methods were improved so that data for the cage rotation direction would not be affected by errors. For the design improvement method, the reliability was verified through the system applicability. This study is expected to be a reference for failure analysis and design for similar weapon systems in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.131-142
• /
• 2023

Solar power facilities to reduce carbon emissions are continuously being installed in forests, farmland, city, and on water. However, research on visual preferences and the psychological impact on observers after installing solar power facilities is insufficient. Therefore, in this study, shooting was conducted according to the viewing distance of the near, middle, and distant views of Hapcheon Dam, Korea's largest floating photovoltaic power plant. The acquired images were edited using Photoshop to compare the presence or absence of floating photovoltaic power generation facilities. In addition, psychological changes and visual preferences were analyzed through an EEG test and questionnaire among 50 participants. The results are summarized, as follows. First, the installation of water photovoltaic power generation facilities has a passive impact on the subjects' psychological changes and visual preference. Second, the psychological changes due to the installation of water photovoltaic power generation facilities were judged to affect almost all research subjects, regardless of nationality, gender, or universisty major. Third, the visual preference for installing the water photovoltaic power generation facility is low, which can be interpreted as the water photovoltaic power generation facility negatively affecting the "friendliness" and "naturalness" of the landscape. In addition, this change in visual preference was found to differ depending on the gender and universiity major of the subjects. Fourth, the psychological change and visual preference of the floating photovoltaic power generation facility according to the viewing distance, found that the close range had a higher effect than the middle and distant ranges.