• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.41-50
• /
• 2004

the splendid Chinese ship-building technology enjoys a long history and has an important place in the world ship building history. Up to present, the study of ship-building technology focuses on the study of western ship-building technology, so the study of Chinese ship-building technology can remedy this. With the development of society, ship-building technology enjoys a fast development, in Song dynasty (960-1279) the Chinese ship-building technology had developed very much. Its main characteristics are the large size of ships and the rapid increase in number. The Chinese ship-building technology of Song dynasty established basis for thai of Yuan dynasty, thus a study on the Chinese ship-building technology of Song dynasty can help better understand the Chinese ship-building history.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.80-85
• /
• 2001

The early construction of the internet based ship basic planning supporting system based on the concurrent engineering and the internet technology is essential as a means for the improvement of technology and design productivity our ship building industry is facing currently. Further more, technological base construction for the construction for the construction of the cooperation system on the level of ship building industry is necessary for the technological base security to maintain and develop ship building industry continuosly in the 21st century of the information industry environment and for the technological improvement of the middle and small shipyard falling behind relatively and finally for the breaking through our ship building industry environment in which inter-enterprise competition is deeping. In this study, we designed the frame-system of the ship design supporting system and presented the development scenario based on core element technology.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.457-462
• /
• 2010

Sound absorption capability and bending strength of laminated ship-building plywood waste of maple and melanti wood were estimated. Sound absorption coefficients of wood had been measured by the two microphone transfer function method and bending strength examined by three point loading. The maximum strength in bending of laminated ship-building plywood waste of maple and melanti wood were 534 and 414 kgf/$cm^2$, respectively. The sound absorption coefficients of laminated ship-building plywood waste were higher than mongolian oak and fiber board, well used construction material. Especially, in the case of laminated ship-building plywood waste of melanti wood, average sound absorption coefficient was about 0.25. It was surmised that the laminated ship-building plywood waste can be used as interior materials because of its good mechanical and sound absorption properties.

• Ocean and Polar Research
• /
• v.42 no.2
• /
• pp.171-178
• /
• 2020

R/V EARDO, commissioned in 1992, has successfully carried out ocean research campaigns in Korean jurisdictional and adjacent waters, including continental margins and coastal zones within the Korean Exclusive Economic Zone (EEZ), for 29 years. However, it will soon be reaching the end of its useful service life. A replacement for R/V EARDO is urgently needed to ensure the safety of vessel itself and its crews, and efficient ship operation and maintenance, as well as to meet modern scientific mission requirements (SMRs). Basic specifications for a replacement ship have been devised and reviewed over the past nine months. A test of the proposed hull form was also performed. The total tonnage of the proposed vessel is approximately 740 tons, and the overall length and width are 62.0 and 11.6 m, respectively. The new ship will thus be 73% larger than the current R/V EARDO; in particular, the research workspace will be 4.4 times larger. The major design priorities are the propulsion system, efficiency of radiated noise and vibration control, and the dynamic positioning system. An environmentally friendly emission system, meeting International Maritime Organization (IMO) Tier III regulations, will be installed in the third exhaust pipe. Various wet and dry lab spaces as well as 32 different scientific instruments have also been considered in the ship design.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.117-120
• /
• 2000

In the Step of preliminary ship design a designer should decide a economic ship. The economic ship has the least building cost to a annual freight amount satisfying a given design condition That is RFR is minimum among alternatives.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.190-192
• /
• 2009

Development of safety monitoring system for workers in the ship building industry is currently under progress using RFID(Radio Frequency IDentification) for successful development of the U-BUSS(Ubiquitous- Safety User Safety System). For decades, RFID technology has become a key technology to provide the real-time location system of worker and is variously used for safety monitoring system to increase productivity, improve the blasting quality and enhance the safety of working condition in the ship building industry In this paper, 2.45GHz band RTLS(Real Time Location System) technologies and the ubiquitous safety monitoring system of the ship yard's blasting cell are described.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.22
• /
• pp.65-79
• /
• 2007

This research project is prepare for the inspection of increasing aluminum vessel. This report contains inspection item and technique follow with building schedule aluminum vessel for surveyor study material and reference data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.35-40
• /
• 2004

Ship can not sail without water. Ships sail along different routes with different natural conditions. Thus ships sailing at different sea areas have their respective characteristics. The northern sea area and the southern one of China have different characteristics, that is to song, the sea in the northern area is shallow and that in the southern area is deep, Chinese ships developed into different types in order to adapt to this.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.258-266
• /
• 2013

In shipbuilding, 2D manufacturing drawings are crucial for building a ship. Even various types of 3D models are being utilized for supporting ship manufacturing, which does not reduce the importance of 2D drawings. Recently things are changing in the shipbuilding industry. To reduce the number of 2D drawings or to reduce the quantity of information contained in 2D drawings, some attempts that can substitute for 2D drawings are being made. One of the attempts is to visualize lightweight 3D manufacturing models in a mobile device. In this paper, a method for displaying lightweight 3D models of a ship in an Android based device is introduced. To overcome the problem with parsing JT files in Android system, JT files are parsed in a Windows based server and as-simple-as-possible visualization data are transmitted to an Android based viewer. A comparison result with a commercial system is also given.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.