• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.319-324
• /
• 2018

The collision problem is one of the design factors that must be carefully considered for the risk of collision occurring during the operation of ships and offshore structures. This paper presents the main results of the ship collision study, and its main goal is to analyze potential crash scenarios that may occur in the FLNG (Floating Liquefied Natural Gas) considering the likelihood and outcome. Consideration being given to vessels visiting the FLNG and surrounding vessels navigating around, such as functionally supported vessels and offloading carriers. The scope includes vessels visiting the FLNG facility such as in-field support vessels and off-loading carriers, as well as third party passing vessels. In this study, based on QRA (quantitative risk assessment), basic research methods and information on collision are provided. Based on the assumptions and methodologies documented in this study, it has been possible to clarify the frequency of collision and the damage category according to the type of visiting ship. Based on these results, the risk assessment results related to the collision have been derived.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.123-134
• /
• 2006

In this study ship collision risk analysis is performed to determine the design vessel for collision impact analysis of the maritime bridge. Method II which is a probability based analysis procedure is used to select the design vessel for collision impact from the risk analysis results. The analysis procedure, an iterative process in which a computed annual frequency of collapse(AF) is compared to the acceptance criterion, includes allocation method of acceptance criterion of annual frequency of bridge component collapse. The AF allocation by weights seems to be more reasonable than the pylon concentration allocation method because this AF allocation takes the design parameter characteristics quantitatively into consideration although the pylon concentration allocation method brings more economical results when the overestimated design collision strength of piers compared to the strength of pylon is moderately modified. From the assessment of ship collision risk for each bridge pier exposed to ship collision, a representative design vessel for all bridge components is selected. The design vessel size varies much from each other in the same bridge structure depending upon the vessel traffic characteristics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.918-927
• /
• 2022

The purpose of this study was to investigate the causes of collisions by examining 668 cases of merchant ship collision accidents that occurred during the past 12 years (2010-2021) and analyzed them statistically. Further, the analysis results were applied to propose a human error prevention collision avoidance (HEPCA) model. The statistical annual report of the Korea Maritime Safety Tribunal (KMST) and the collision investigation report were investigated to collect data on the causes of collisions of merchant ships, and frequency analysis was performed using the statistical analysis tool, SPSS Statistics. In the first-stage analysis, the causes of collisions were analyzed targeting 668 merchant ship collision accidents, and in the second-stage analysis, the identified maximum frequency cause factors were analyzed in detail. The analysis results identified that 98 % of the cause of the collision was the human error of the navigator, and the highest frequency was in the order of neglect of look-out > violation of navigation regulations > improper maneuvering. The cause of the neglect of look-out was mainly neglecting continuous monitoring after the first recognition of the target ship. The HEPCA model for human error prevention was proposed by applying the analysis results to the collision case of the investigation report. The results of this study are expected to be used as educational materials at marine navigator educational institutions and in practice for avoiding collisions caused by human errors of navigators.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.339-345
• /
• 2018

Sunrise and sunset times differ depending on location and date. Previous studies conveniently but monotonously applied day and night times set up. This research defined the daytime and nighttime while considering the time of twilight according to the date and the location of ship collision accidents. Classifying the frequency of ship collision accidents with this standard, we conducted a chi-squared test for the difference between daytime and nighttime. The frequencies of ship collision accidents according to daytime and nighttime was compared by season, month, and time, and all of them showed statistically significant differences. The highest number of daytime ship collisions was 11.6 %, in June, and nighttime collisions peaked at 13.7 %, in December. The most frequent hour for daytime ship collisions was 0700h-0800h, at 10.2 %, and nighttime collisions peaked between 0400h-0500h, at 16.9 %. It is clear that the criteria used in previous studies cited was applied without any theoretical basis and likely only for the convenience of the researchers. It was found that results depend on what criteria are applied to the same research data. This study shows that statistical analyses of marine accidents, traffic volume, and congestion density should be carried out quantitatively while considering daytime and nighttime hours for each particular location and date.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.85-91
• /
• 2016

The most important factor in the structural design of ships and offshore structures operating in arctic region is ice load, which results from ice-structure interaction during the ice collision process. The mechanical properties of ice related to strength and failure, however, show very complicated aspect varying with temperature, volume fraction of brine, grain size, strain rate and etc. So it is nearly impossible to establish a perfect material model of ice satisfying all the mechanical characteristics completely. Therefore, in general, ice collision analysis was carried out by relatively simple material models considering only specific aspects of mechanical characteristics of ice and it would be the most significant cause of inevitable errors in the analysis. Especially, it is well-known that the most distinctive mechanical property of ice is high dependency on strain rate. Ice shows brittle attribute in higher strain rate while it becomes ductile in lower strain rate range. In this study, the simulation method of ice collision to ship hull using the nonlinear dynamic FE analysis was dealt with. To consider the strain rate effects of ice during ice-structural interaction, strain rate dependent constitutive model in which yield stress and hardening behaviors vary with strain rate was adopted. To reduce the huge amount of computing time, the modeling range of ice and ship structure were restricted to the confined region of interest. Under the various scenario of ice-ship hull collision, the structural behavior of hull panels and failure modes of ice were examined by nonlinear FE analysis technique.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.26-32
• /
• 2017

Enlargement and speed-up of a ship and diversification of ship's type have served to greatly increase the importance of marine transport means. It's reported that accident occurrence frequency of collision is high next to engine damage among the ship accident types, and that the accident ratio according to human factors is also high. In addition, ship accidents come to occur caused by complex cause factors rather than a sole cause factor, it is necessary to investigate the cause factors through the written verdict. This study proposed the cause factors of collision ship accident on the basis of human factors in collision ship accident among the written verdicts provided by the Korean Maritime Safety Tribunal, and inquired into the cause factor and effect through the correlation analysis of accident occurrence factors. Also, this study predicted the collision accident through analyzed the major cause factor of the occurrence at the zero minute when collision on the basis of the time taken from the time point of detecting collision of ships to the time point of collision occurrence. This study used commercial software-Statistical Package for Social Sciences (SPSS Ver21.0) to do correlation analysis. For time analysis, this study analyzed the cause factor and time by analyzing the time taken from the time point of detected ships to the time point of collision occurrence on the basis of the written verdicts. The study analysis showed that there were many cases of collision ship accidents occurrence caused by more than two sorts of cause factors, and that the case (zero minute) where there is no time to spare for collision avoidance accounted for 36.1 %, and negligence in guard or surveillance of the other ship, and sailing while drowsy, or drinking was a contributor to an accident. Poor watch keeping is very strong relationship with pool ready for sail.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.68-68
• /
• 2017

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.11-19
• /
• 2006

In this study ship collision risk analysis is performed to determine the design vessel for collision impact analysis of suspension bridge. Method II in AASHTO LRFD bridge design specifications which is a more complicated probability based analysis procedure is used to select the design vessel for collision impact. From the assessment of ship collision risk for each bridge pier exposed to ship collision, the design impact lateral strength of bridge pier is determined. The analysis procedure is an iterative process in which a trial impact resistance is selected for a bridge component and a computed annual frequency of collapse(AF) is compared to the acceptance criterion, and revisions to the analysis variables are made as necessary to achieve compliance. The acceptance criterion is allocated to each pier using allocation weights based on the previous predictions. This AF allocation method is compared to the pylon concentration allocation method to obtain safety and economy in results. This method seems to be more reasonable than the pylon concentration allocation method because AF allocation by weights takes the design parameter characteristics quantitatively into consideration although the pylon concentration allocation method brings more economical results when the overestimated design collision strength of piers compared to the strength of pylon is moderately modified. The design vessel for each pier corresponding with the design impact lateral strength obtained from the ship collision risk assessment is then selected. The design impact lateral strength can vary greatly among the components of the same bridge, depending upon the waterway geometry, available water depth, bridge geometry, and vessel traffic characteristics. Therefore more researches on the allocation model of AF and the selection of design vessel are required.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.13-20
• /
• 2013

In this paper, a collision accident of a container/Ro-Ro ship was numerically analyzed. A container trailer collided with a longitudinal bulkhead of the ship in the accident, which constituted a longitudinal wall of a heavy fuel oil tank. Due to the accident, the bulkhead plate was ruptured and the heavy fuel oil spilled out of the tank. The detailed information regarding the collision velocity and the mass of the trailer was not provided. Therefore, several collision accident scenarios were constructed based upon the arrangement of the ramp way. Each collision accident scenario was analyzed to predict the extents of damage using a commercial numerical package, ABAQUS. Based on the analysis results it is proposed how to minimize the extents of damage. Through the investigations performed in this study it was found that the understandings of various damages due to collision accidents and the developments of structural design guidance against collision are necessary for the betterment of Container/RO-RO ships' performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.71-76
• /
• 2004

To deal with ship collision or grounding, double hull structure has been applied to ships carrying dangerous cargoes. Studies about ability of double hull structure to absorb collision energy and determining fracture state are still under researching. In this study, commercial analysis code, LS-DYNA3D, is used to analyze collision strength of ships in various scenarios. 46K Chemical／Product Carrier is used as analysis subject ship. Study about Energy-Indentation and Force-Indentation is conducted under conditions that weight and collision velocity are changed. Results of this study are very helpful to make mechanism of collision accident clear and to supply useful information about collision strength criteria.