• Tuberculosis and Respiratory Diseases
• /
• v.81 no.2
• /
• pp.148-155
• /
• 2018

Background: Although targeted therapy and immuno-oncology have shifted the treatment paradigm for lung cancer, platinum-based combination is still the standard of care for advanced non-small cell lung cancer (NSCLC). Pemetrexed continuation maintenance therapy has been approved and increasingly used for patients with nonsquamous NSCLC. However, the efficacy of this strategy has not been proven in patients without driving mutations. The objective of this study was to compare the clinical benefit of pemetrexed continuation maintenance to conventional platinum-based doublet in epidermal growth factor receptor (EGFR)-negative lung adenocarcinoma. Methods: A total of 114 patients with EGFR-negative lung adenocarcinoma who were treated with platinum doublet were retrospectively enrolled. We compared the survival rates between patients received pemetrexed maintenance after four-cycled pemetrexed/cisplatin and those received at least four-cycled platinum doublet without maintenance chemotherapy as a first-line treatment. Results: Forty-one patients received pemetrexed maintenance and 73 received conventional platinum doublet. Median progression-free survival (PFS), which was defined as the time from the day of response evaluation after four cycles of chemotherapy to disease progression or death, was significantly higher in the pemetrexed maintenance group compared to conventional group (5.8 months vs. 2.2 months, p<0.001). Median overall survival showed an increasing trend in the pemetrexed maintenance group (22.3 months vs. 16.1 months, p=0.098). Multivariate analyses showed that pemetrexed maintenance chemotherapy was associated with better PFS (hazard ratio, 0.73; 95% confidence interval, 0.15-0.87). Conclusion: Compared to conventional platinum-based chemotherapy, premetrexed continuation maintenance treatment is associated with better clinical outcome for the patients with EGFR wild-type lung adenocarcinoma.

• Korean Journal of Plant Resources
• /
• v.21 no.4
• /
• pp.336-340
• /
• 2008

Corilagin (CRN) isolated from Euphorbia helioscopia as rheumatoid arthritis drug. CRN was medicated to the abdominal cavity of collagen induced arthritis (CIA) mice that was an animal model for rheumatoid arthritis and its effects on incidence and arthritis index were studied. The results were as folllows; It was exhibited that medicating corilagin inhibited the infiltration of activated T lymphocytes into an inflammatory joint. The production of IgG and IgM that were RF (rheumatoid factor) and inflammatory cytokine, IL-6 and $TNF-{\alpha}$were reduced. After measuring $IFN-{\gamma}$and IL-4, it was found that it was shifted into Th2 immune response as increasing in IL-4. After liver function test, studies on liver poisoning of AST/ALT should be continued.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.362-366
• /
• 2018

Silicon carbide is widely used in power semiconductor devices owing to its high energy gap. In particular, Schottky barrier diode (SBD) and PiN diodes fabricated on 4H-SiC wafers are being applied to various fields such as power devices. The characteristics of SBD and PiN diodes can be extracted from C-V and I-V characteristics. The measured Schottky barrier height (SBH) was 1.23 eV in the temperature range of 298~473 K, and the average ideal factor is 1.17. The results show that the device with the Schottky contact is characterized by the theory of thermal emission. As the temperature increases, the parameters are changed and the Vth is shifted to lower voltages.

• International Journal of Computer Science & Network Security
• /
• v.23 no.6
• /
• pp.27-34
• /
• 2023

This paper proposed an Inter-Carrier-Interference (ICI) Canceling Orthogonal Frequency Division Multiplexing (OFDM) receiver for 5G mobile system to support 500 km/h linear motor high speed terrestrial transportation service. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceler is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number 𝒏 to receiver sub-carrier number 𝒍 is generated. In case of 𝒏≠𝒍, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 2 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, for modulation schemes below 16QAM, we confirmed that the difference between BER in a 2 path reverse Doppler shift environment and stationary environment at a moving speed of 500 km/h was very small when the number of taps in the multi-tap equalizer was set to 31 taps or more. We also confirmed that the BER performance in high-speed mobile communications for multi-level modulation schemes above 64QAM is dramatically improved by the use of a multi-tap equalizer.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.67-78
• /
• 1999

In present, the terminal area of the Nagdong River Delta consists of micro-depositional landforms with sand barrier islands, sand bars and tidal flats which are arranged parallel to the present shoreline, and have rapidly shifted toward sea during last 100 years due to human activities such as construction of estuary dam, industrial complex and residential area. To clarify the landform changes of the area, the author traced the morphologic change pattern based on interpretation of air-photos, topographic maps and old Korean traditional map, and the results are as follows ; Based on the Daedongyeojido, one of the old Korean map, published in 1861, the area including upper part of the delta was underlying by sea level except two larger sand barriers, which means the Nagdong River Delta was not completely formed as the present outline of morphology by 1860s. According to the topographic map(1 :50,000) of 1916, the delta resembled to the present morphology pattern was exposed in 1916, and at this time the area was mainly composed of one sand barrier island, four sand bars and tidal flats, which had slowly elongated southwards before construction of the Nagdong River Estuary Dam in 1987. But after 1987, the area has been rapidly and drastically shifted southwards in arrange with one chain of sand barrier islands (Elsugdo -Myeonghodo-Sinhodo ) and four chains of sand bars (first chain ; Jinwoodo -Daemadeung-Maenggeummeorideung, second chain : Jangjado-Baeghabdeung, third chain ; Saedeung-Namusitdeung, fourth : Doyodeung-Dadaedeung) parallel to shoreline. This rapid landform change of the area is now occurring, and is seemed to ascribed firstly, to the construction of the Nagdong River Estuary Dam on Elsugdo in 1987, the Sinho Industrial Complex on Sinhodo and Myeongji Residential Area on Myeonghodo in 1992, secondly, to artificial alteration of drainage channel and consequential breakdown of former energy system between riverflow and tidal-and wave-energy. From these facts, it is inferred that the landform change pattern of the area will continue until a new equilibrium between the factor available to this energy system is accomplished.

• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.67-72
• /
• 2004

The glass-forming conditions are investigated in the $K_2$O-CaO-$SiO_2$ $-P_2$$O_{5}$ system with 10~65 mole% of$ P_2$$O_{5}$. Thermal properties and dissolution properties were investigated according to variation of the SiO and KO contents in selected compositions. The glass formation condition was determined when $K_2$O/$P_2$$O_{5}$ mole ratio 0~0.24, $SiO_2$/($SiO_2$+$P_2$$O_{5}$ ) mole ratio 0～0.29, and CaO/$P_2$$O_{5}$ mole ratio 0~1.00. In the result of the thermal properties, the glass transition temperature($T_{g}$) and softening temperature($T_{s}$ ) were gradually shifted to the lower temperature range with increase of $K_2$O contents. The maximum value of the chemical durability was shown in $K_2$$PO_2$$O_{5}$ mole ratio 0.17 when the $SiO_2$ contents were changed, and $K_2$O was fixed at 10 mole%. Hence the change of the $K_2$O/$P_2$$O_{5}$ mole ratio was found that a new main factor of the chemical durability.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.937-953
• /
• 2013

The theoretical discussion of generation process and development directions of economic fluctuations are actively discussed. This study describes the economic changes applied to empirical research on economic volatility in Korea under the economic theory of network theory [Acemoglu, et al. 2012, 2010]. For the three years in 2000, 2005, and 2010, the network analysis were applied to industry input-output tables. The research results show that the network economic structures in Korea is shifted from a high connectivity among sectors to a lower connectivity. Also, the impact of key industries and the mutual connectivity of input and out among industrial sectors are weaken. Implications for industry and technology policy are derived form the study results.

• ETRI Journal
• /
• v.18 no.1
• /
• pp.15-27
• /
• 1996

The effects of $Nd_2O_3$ and $TiO_2$ addition on the microstructures and microwave dielectic properties of $BaO-Nd_2O_3-TiO_2$ system were investigated. $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_{5}O_{14}$ phases were observed for compositions based on BaO/$Nd_2O_3$ = 1 ratio. The compositions deviated from $BaO/Nd_2O_3=1$ ratio were composed of major phases of $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_5O_{14}$, and the compound of $Nd_2O_3$ and $TiO_2(Nd_2Ti_2O_7)$ or that of BaO and $TiO_2(BaTi_4O_9)$. The microstructure of ceramic with $BaO{\cdot}Nd_2O_3{\cdot}4TiO_2$ composition varied from spherical grains to needlelike grains with increasing sintering temperature. With increasing $Nd_2O_3$, the optimum sintering temperature with maximum density increased, and the dielectric constant(${\varepsilon}_r$) and quality factor(Q) decreased due to the formation of secondary phases. With increasing $TiO_2$, the optimum sintering temperature and the dielectric constant decreased with increased Q value. And the temperature coefficient of resonant frequency, ${\tau}_f$ shifted toward positive direction. The dielectric ceramics with $BaO/Nd_2O_3=1$ showed Q values of above 2000 and dielectric constants of above 80 at 3GHz.

• Journal of Environmental Science International
• /
• v.29 no.1
• /
• pp.79-93
• /
• 2020

To determine the size distributions of water-soluble inorganic ionic species (WSIS) in roadside aerosols, sampling experiments were carried out in the urban roadside area of Jeju City on August 2018 and January 2019 by using the eight-stage cascade impactor sampler. The mass of roadside aerosols were partitioned at 57% in fine fraction, 36-37% in coarse fraction, and 6-7% in giant fraction, regardless of summer and winter. The mass concentrations of WSIS except for Na+ and SO42- in roadside aerosols were higher in winter than in summer. The size distributions of Na⁺, Mg²⁺, Ca²⁺ and Cl^- were characterized by bimodal types with coarse particle mode peaking around 3.3-4.7 ㎛ and 5.8-9.0 ㎛. The size distributions of NO₃^- and K⁺ shifted from a single fine mode peaking around 0.7-1.1 ㎛ in winter to bimodal and/or trimodal types with peaks around coarse mode in summer. SO₄^2- and NH₄⁺ showed a single fine mode peaking around 0.7-1.1 ㎛. The MMAD of roadside aerosols was lower than that of Na⁺, Mg²⁺, Ca²⁺ and Cl-. Based on the marine enrichment factors and the ratio values of WSIS and the corresponding value for sea water, the composition of roadside aerosols in Jeju City may be practically affected by terrestrial sources rather than marine source.