• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.291-300
• /
• 1994

It is desired to operate tractor engines at or near maximum torque much of the time in field operation to increase fuel efficiency. To do this it is necessary to reduce engine speed and to shift gears to higher ratios as frequently as possible. Because of load variations in most drawbar work and inconvenience in gear shift, however, gear-type transmission are usually set in one ratio at unnecessarily high engine speeds, and engine-torque variations are used to compensate for changes in drawbar load. As a result, the most of time the tractor is not operated efficiently in terms of fuel consumption and work output. The objective of this study was to develop an automatic control system which is able to operate a tractor equipped with gear transmission under the optimal condition in terms of fuel efficiency with automatic governor setting and gear shift. An indoor experimental test set which can be used to simulate tractor operation, control engine speed and transmission ratio was developed in the previous paper. In this paper, the performance of the optimal operation system is reported. Through a series of tests, it was found that the automatic control system for optimal operation of tractors with gear transmission had a satisfactory performance.

• 한국융합학회논문지
• /
• 제8권12호
• /
• pp.199-208
• /
• 2017

본 연구의 목적은 한국의 소규모 산업장에 근무하는 생산직 근로자의 초과근무가 건강관련 삶의 질에 미치는 영향을 분석하기 위함이다. 본 서술적 조사연구는 2015년 10월부터 11월까지 6개의 소규모 사업장에서 근무하는 생산직 근로자 229명을 대상으로 하였다. 융합적 관점으로 다양한 변수들의 영향을 고려한 상태에서 생산직 근로자의 건강관련 삶의 질에 영향을 미치는 초과근무의 영향을 파악하기 위하여 위계적 회귀분석을 실시하였다. 그 결과 초과근무를 투입하였을 때 설명력 변화가 유의하게 증가하였으며, 생산직 근로자의 건강관련 삶의 질에 영향을 미치는 요인은 초과근무(${\beta}=.152$, p=.025), 우울(${\beta}=-.192$, p=.003), 야간근무(${\beta}=-.201$, p=.032)였다. 본 연구 결과는 향후 한국의 생산직 근로자의 건강관련 삶의 질을 높이기 위한 최적 근로시간 기준을 마련하는데 기초자료로 활용될 수 있을 것이다.

• Journal of Preventive Medicine and Public Health
• /
• 제28권2호
• /
• pp.497-510
• /
• 1995

This study was carried out to assess work ability of manufacturing workers and managerial workers. Subjects were 446 manufacturing workers and 278 managerial workers employed in Gumi industrial complex and the observation period was for 1 month(February to March), 1995. In this study, as a questionnaire for the assessment of work ability, we used the Work Ability Index(WAI) which was developed by Institute of Occupational Health in Finland. Major findings obtained from this study were as follows ; WAI was poor in lower economic condition, shift work, irregular diet group(p<0.05). There were no evident trends of WAS in sex, educational level, obesity index, exercise, smoking, and alcohol drinking. In the groups of sensitive to perception of stress, other industrial classification except textile and electronics, the more than 9 hours work, the evident trends of poor WAS were observed(p<0.01). In the groups of $30\sim39$ years old, $40\sim49$ years old, unmarried, high school, shift work, standard body weight, and regular .diet, WAI between manufacturing workers and managerial workers was significantly different(p<0.01) and WAI of managerial worker was worse than that of manufacturing worker.

• Safety and Health at Work
• /
• 제4권4호
• /
• pp.197-200
• /
• 2013

Background: A variety of sociodemographic factors, such as gender, age, household income, and educational level, influence individuals' likelihood of smoking.Work-related factors may also be linked to smoking behavior.We sought to investigate the relationship between smoking and work environment in South Korea. Methods: We analyzed data from the Fifth Korean National Health and Nutrition Examination Survey to determine whether there was an association between smoking and occupation type (e.g., manual, nonmanual, or service work), night-shift work, and hours worked/week (e.g., <40, 40-48, 49-60, or >60 hours) for 4,685 workers. Regression models were adjusted for sociodemographic variables such as age, recent alcohol consumption, hours slept, educational level, and household income. Results: The prevalence of smoking was 50.1% in men and 7.2% in women. For women, manual workers had 2.34 times [95% confidence interval (CI): 1.02-5.36] greater odds of smoking compared with nonmanual workers, whereas service workers had 2.37 times greater odds (95% CI: 1.28-4.40). Furthermore, women who worked 49-60 hours had 2.21 times greater odds of smoking (95% CI: 1.10-3.75) as compared with women who worked 40-48 hours. Conclusion: Women who work long hours or who are employed in service or manual positions are more likely to smoke. These results indicate a need in South Korea to target these specific groups when creating nonsmoking policies.

• 간호행정학회지
• /
• 제21권5호
• /
• pp.519-529
• /
• 2015

Purpose: This study was performed to identify perceptions on fixed night shift system and turnover intention of general hospital nurses and to explore a desirable application plan for a fixed night shift system. Methods: This study was a cross-sectional survey. Participants were 300 nurses working at one general hospital in GyeongGi-Do, Korea. Data were collected from November 3 to 7, 2014, with a structured questionnaires and analyzed using SPSS/PC ver 20.0 programs. Results: Of the participants 73.5% had thought about turnover because of night shifts and the preconditions for desirable fixed night shift system were a payment plan differentiated according to work conditions and an adequate number of nursing staff. Economic and administrative supports like 'raising extra-pay for night shift' and 'increasing the number of paid holidays' were very important for a desirable fixed night shift system. Conclusion: The results indicate that the most important factor for a desirable fixed night shift system to decrease nurses' turnover intention is economic and administrative support according to the needs of the nurses. So nursing managers need to find a desirable fixed night shift system considering nurses' demographic characteristics and organizational characteristics.

• Journal of Preventive Medicine and Public Health
• /
• 제27권3호
• /
• pp.475-486
• /
• 1994

In order to provide necessary information for better health of workers through understanding the actual status of the industries adopting shift systems. The data were gathered from a stratified random sample of 347 (0.5%) firms selected out of about 70,000 manufacturing industries throughout the nation in 1993. Stratification during sampling was by industrial group and number of workers. The major findings obtained from 288 firms surveyed completely were as follows : 1. About 20.2% of the 288 firms were adopting shift systems and shirtworkers accounted for about 25.1% of the total work force in 288 firms. 2. The bigger number of workers was, the higher the adopting rate of shift system was. 3. The rate of having welfare facilities such as dining room, commuting bus, washing facilities, and health care room etc. was higher in the industries adopting shift systems. 4. The major industrial groups adopting shift systems were the rubber a: plastic goods manufacturing industry (54.1 per 100 firms) and the textile manufacturing industry (44.8 per 100 firms). However, the proportion of shiftworkers was higher in the textile manufacturing industry (70.5 per 100 firms) and the electronics industry (57.9 per 100 frms). 5. The most predominant work schedule was the weekly rotating, semi-continuos 2-crew 2-shift system (47.5%). 6. In the industries adopting shift systems, shiftworkers had an adjusted average of 0.29 spells per 100 workers ($0.14{\sim}0.45$ in 95% C.I.) compared to 0.23 spells per 100 nonshift dayworkers ($0.15{\sim}0.31$ in 95% C.I.) for 1 month. 7. Also, in the industries adopting shift systems, the adjusted average annuel turn-over rate of shiftworkers was 13.07 per 100 workers ($12.03{\sim}14.12$ in 95% C.I.) compared to 10.18 per 100 nonshift dayworkers ($9.53{\sim}10.82$ in 95% C.I.).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.49-52
• /
• 1987

In this work, the characteristics of a six step inverter fed brushless DC motor are analyzed and the control of amplitude of inverter input voltage and phase shift of a six step inverter is discussed. The effects of the motor performance, efficiency and power factor, are studied.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.435-437
• /
• 2003

This study presents work to utilize RADARSAT SAR image for forecast oil slick trajectory movement. The fractal dimension algorithm used to detect oil slick. The Doppler frequency shift and quasi-linear model was used to simulate a current pattern from RADARSAT image. The Fay’s algorithm of oil slick spreading was developed based on a Doppler frequency shift model. Thus, the study shows that fractal dimension algorithm discriminated the oil slick from the surrounding water features. The quasi-linear model shows that the current pattern can be simulated from single RADARSAT image. The oil slick trajectory model shows that after 48 hrs, the oil slick parcels deposited along the coastal waters.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.38-45
• /
• 2006

In this work, optimal finish machining condition considering total time for mold or electrode manufacturing was investigated. First, manual finishing time according to the machining condition was analyzed for the work material. The effect of runout and phase shift of tool path on surface finish was also considered in those analyses. Secondly, optimal manual finishing processes were determined for various machining conditions. Finally, finish machining time and corresponding manual finishing time were taken into account for the estimation of the total time of manufacturing mold. Though small feed per tooth and pick feed reduced the manual finishing time, the finish machining time increased in such conditions. With a machining condition of feed per tooth of 0.2 mm and pick feed of 0.3 mm, the minimum total time of manufacturing mold was achieved in our machining condition.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.142-149
• /
• 1999

Strip profile and shape control is one of the most important technologies in cold mill, especially for ultra-thin and wide cold strip. The 6-high mills, both of HCMW and UCMW mill, are known to be very effective for the shape controllability. The optimized values of these factors for set-up scheduling were analyzed and found that excellent strip control would be possible by controlling the combination of the influencing factors according to hot coil profile. The important considerations for operation were discussed for individual stand.