• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.385-388
• /
• 2008

Four kinds of PET fabrics were coated with Copper and Nickel by electroless chemical plating, and the electromagnetic wave shielding effectiveness for those samples have been examined. The shielding effectiveness showed between 90 dB and 70 dB, and it related to the fabric structure, such as cover factor and cloth density. The dense fabric structure showed the better shielding effect.

• 한국융합학회논문지
• /
• 제4권4호
• /
• pp.49-57
• /
• 2013

The lightning shielding of different 500 kV HVAC-TL high voltage AC transmission lines was analyzed. The studied transmission lines were horizontal flat single circuit and double circuit transmission lines. The lightning attractive areas were drawn around power conductors and shielding wires. To draw the attractive areas of the high voltage transmission lines, transmission line power conductors, shielding wires and lightning leader were modeled. Different parameters were considered such as lightningslope, ground slope and wind on lightning attractive areas. From the calculated results, the power conductors voltages affected on attractive areas around power conductors and shielding wires. For negative lightning leader, the attractive area around the transmission line power conductor increased around power conductors stressed by positives voltage and decreased around power conductors stressed by negative voltage. In spite of this, the attractivearea of the transmission line shielding wire increasedaround the shielding wire above the power conductor stressed by the positive voltage and decreased around the shielding wire above the power conductor stressed by negative voltage. The attractive areas around power conductors and shielding wires were affected by the surrounding conditions, such as lightning leader slope, ground slope. The AC voltage of the transmission lines made the shielding areas changing with time.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1642-1651
• /
• 2021

In this study, isophtalic neopentyl glycol polyester (NPG-PES) based composites with different loading ratios of pure tungsten metal (W), tungsten (VI) oxide (WO₃), tungsten boron (WB) and tungsten carbide (WC) composites were prepared as alternative shielding materials for ionizing electromagnetic radiation (IEMR) shielding. Structural characterizations of the composites were done. Gamma spectrometric analysis of composites for 80-2000 keV energy range was performed and their usability as IEMR shielding was discussed. As a result, the produced composites showed a shielding performance of 60-100% of the lead (the most widely used IEMR shielding material) depending on the reinforcement material, reinforcement loading rate and experimental conditions. Thus, it was reported that produced composites could be an alternative to lead shieldings that have several disadvantages as toxic properties, difficulty of processing and inelasticity.

• Journal of Radiation Protection and Research
• /
• 제43권1호
• /
• pp.20-28
• /
• 2018

Background: Heat energy produced in nuclear reactors and nuclear fuel cycle facilities interactions modifies the physical properties of the shielding materials containing water content. Therefore, in the present paper, effect of the heat on shielding effectiveness of the concretes is investigated for gamma and neutron. The mass attenuation coefficients, effective atomic numbers, fast neutron removal cross-section and exposure buildup factors. Materials and Methods: The mass attenuation coefficients, effective atomic numbers, fast neutron removal cross-section and exposure buildup factors of ordinary and heavy concretes were investigated using NIST data of XCOM program and Geometric Progression method. Results and Discussion: The improvement in shielding effectiveness for photon and reduction in fast neutron for ordinary concrete was observed. The change in the neutron shielding effectiveness was insignificant. Conclusion: The present investigation on interaction of gamma and neutron radiation would be very useful for assessment of shielding efficiency of the concrete used in high temperature applications such as reactors.

• Carbon letters
• /
• 제27권
• /
• pp.90-97
• /
• 2018

Electromagnetic interference (EMI) shielding is an important issue in modern daily life due to the increasing prevalence of electronic devices and their compact design. This study estimated EMI-shielding effect (EMI-SE) of small ($8-14{\times}17mm$) Hanji (Korean traditional paper) doped with carbon nanotubes (CNTs) and compared to Hanji without CNT using $^2H$ (92.1 MHz) and $^{23}Na$ (158.7 MHz) nuclear magnetic resonance (NMR) peak area data obtained from 1 M NaCl in $D_2O$ samples in capillary tubes that were wrapped in the Hanji samples. The simpler method of using the variation of reflected power and tuning frequency by inserting the sample into an NMR coil was also tested at 242.9, 158.7, and 92.1 MHz. Overall, EMI shielding was relatively more effective at the higher frequencies. Our results validated that NMR methods to be useful to evaluate EMI-SE, particularly for small, flexible shielding materials, and demonstrated that EMI shielding by absorption is dominant in Hanji mixed with CNT.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1413-1417
• /
• 2004

The environmental elements which naturally occur can result in structural damages and operating faults of vessels under the navigation and mooring. These primary factors are considered as wind, waves and tide. In order to investigate wind shielding effects with respect to wind load conditions between two ships which face the wind directly or slantingly to the wind direction, this numerical simulation was preferred in terms of the variation of wind loads according to different distances, wind velocities and wind directions between two ships. The results were proved to be quite reasonable, comparing with experimental data from Danish Maritime Institute, and the report, "Environmental Conditions And Environmental Loads" published by Det Norske Veritas.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.213-214
• /
• 2022

The purpose of this study is to compare and analyze the effect of the length and volume fraction of smooth steel fiber on the electrical conductivity and shielding effectiveness of cementitious composites. As the length and volume fraction of the fiber increase, the movement of electrons becomes active and the formation of a conductive path becomes advantageous, thereby increasing electrical conductivity. Accordingly, the electrical conductivity and the shielding effectiveness showed a very close relationship. Thereafter, it is judged that research is needed to increase the shielding effect.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.191-196
• /
• 2010

The electricity distribution system in Korea is adopting a multi-grounding system. Protection of this distribution system against lightning is performed by installing overhead ground wires over the high voltage wires, and connecting the overhead ground wires to the ground every 200 m. The ground resistance in this system is limited not to exceed $50\Omega$ and overhead ground wire and neutral wire are multiple parallel lines. Although overhead ground wire and neutral wire are installed in different locations on the same pole, this circuit configuration has duplicated functions of providing a return path for unbalanced currents and protecting the distribution system against induced lightning. Therefore, the purpose of this study is to analyze the induced lightning shielding effect according to the neutral wire installation structure of a 22.9kV distribution line in order to present a new 22.9kV distribution line structure model and characteristics. This study calculated induced lightning voltage by performing numerical analysis when an overhead ground wire is present in the multi-grounding type 22.9kV distribution line structure, and calculated the induced lightning shielding effect based on this calculated induced lightning voltage. In addition, this study proposed and analyzed an improved distribution line model allowing the use of both overhead wire and neutral wire to be installed in the current distribution lines. The result of MATLAB simulation using the conditions applied by Yokoyama showed almost no difference between the induced lightning voltage developed in the current line and that developed in the proposed line. This signifies that shielding the induced lightning voltage through overhead wire makes no difference between current and proposed distribution line structures. That is, this study found that the ground resistance of the overhead wire had an effect on the induced lightning voltage, and that the induced lightning shielding effect of overhead wire is small.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.429-435
• /
• 2020

본 연구에서는 탄소계 섬유를 이용하여 EMP차페 시멘트 개발을 위해 저 직경 카본섬유 사용량에 따른 시멘트 페이스트의 물리적 특성과 EMP차폐 성능평가를 실시하였다. 사용된 저 직경 카본섬유의 길이는 100㎛의 크기로서 육안으로는 분말형태를 나타내기 때문에 시멘트 혼화재 개념으로 사용하였다. 실험결과 저 직경 카본섬유 시멘트 사용량 대비 5% 사용 하였을시 압축강도 및 EMP차폐에 효과가 있었으며 그 이상의 사용시에는 차폐효과는 증가 하지 않았다. 또한 실험체 두께에 따른 EMP차폐성능 검토 결과 저 직경 카본섬유가 사용되지 않은 Plain은 두께에 따른 차폐율 증가 효과가 없었으나 저 직경 카본섬유가 사용된 실험체들은 두께 증가에 따라 차폐성능이 증가 하였다. 따라서 저 직경 카본섬유 사용량과 실험체 두께에 따른 성능을 비교평가 하였을시 EMP차폐율 증가시키기 위해서는 저 직경 카본섬유 사용량은 5%가 최적이며 사용량을 증가시키는 것보다 두께를 증가시키는 방법이 효과적일 것으로 사료된다.

• Radiation Oncology Journal
• /
• 제7권2호
• /
• pp.305-311
• /
• 1989

fletcher-Sult 콜포스타트는 방광과 직장의 선량을 줄이기 위해 내부에 차폐물을 포함하고 있다. Cs-137튜브가 내장된 콜포스타트 주변의 물에서 임의점의 선량을 계산한 후 내부 구조에 의한 차폐효과를 구하고, 등선량곡선과 등차폐율 곡선을 그리기 위한 프로그램을 개발하였다. EGA카드를 가진 IBM호환기종 AT 컴퓨터로 MS-Basic V6.0을 이용하여 프로그램을 만들었다. 선량 계간용 알고리듬에 내부구조, 튜브, 콜포스타트의 물질, 형태 및 위치까지 고려되었다. 한 프로그램에 의해 계산된 물에서의 단위 mg. Ra eq당 선량율을 보조기억장치에 저장해 두고, 다른 프로그램에서 필요할 때 불러 쓰도록 하였다. 콜포스타트의 내측 선량이 감소되었으며, 상하의 선량분포가 대칭이 아님을 볼 수 있었다. 선량의 감소는 하부에 비해서 상부에서 더 현저하였으며, 차폐효과도 하부에 비해 상부에서 더 높았으며 내측 거의 전 영역에 차폐효과가 있었다. =1와같은 결과는 콜포스타트 내부에서 튜브가 한쪽으로 이동되어 있고, 튜브내에 선원의 위치가 비대칭인 점과 관련이 있었다. 최대 차폐율은 콜포스타트 상부에서 $49\%$ 하부에서 $44\%$였으며, 등차폐율 곡선은 대체로 선원을 중심으로 하여 방사상이었다. 치료계획에서 방광 및 직장등의 정확한 선량을 구하기 위해서는 콜포스타트 내부구조에 의한 차폐 효과가 고려되어야 할 것이다.