공구강 등 산업용 재료로 널리 사용되는 카바이드 계 재료는 입자 크기 및 분포에 따라 기계적 성질이 변화하므로, 이를 제어하고 조절하는 기술에 관하여 많은 연구가 진행되어 왔다. 본 연구에서는 TiCN-WC-Co 복합초경계 에서 소결 공정 및 조성변화에 따른 입자 모양을 관찰하고 이에 따른 업자 성장 거동을 고찰하였다. 일반적으로 입자 조대화 양상과 고상 입자의 모양과는 밀접한 관계가 있다. 각진 입자의 경우에 는 계면이 원자적으로 singular 하여 원자의 홉착이 어렵기 때문에 임계값 이상의 성장 구동력을 받 는 몇몇 입자만 성장하는 비정상 입자 성장이 일어날 수 있다. 반면에 계면이 rough한 퉁큰 엽자의 경우에는 원자 홉착에 필요한 구동력이 존재하지 않아 성장 구동력을 받는 모든 입자들이 성장하기 때문에 정상 입자 성장을 하게 된다. 이와 같이 입자 모양에 따른 입자 성장 거동은 전체 미세구조를 결정하게 되며, 이에 따른 물리 화학적 물성을 변화시킨다. 이러한 입자 성장 원리를 적용하 면 복합초경계 (TiCN-WC-Co)에서도 입자성장이 억제되고 치밀한 소결체를 제조할 수 있을 것이다. 본 실험에서는 평균입도가 각각 0.1, 1.33, 2$\mu\textrm{m}$인 TiCN, WC, Co 분말을 사용하여 $((I00_{-x)}TiCN+_xWC)-30Co$ (wt%) 조성에서 TiCN/WC 비를 변화시키면서 업자 모양과 입자성장 거동을 관찰하였다. 청량된 분말은 WC 초경 볼로 밀렁하고, 건조한 후, 100 mesh 체로 조립화 하였다. 이 분말을 100 MPa의 압력으로 냉간정수압성형 하고 $10^{-2}$ torr의 진공분위기의 graphite f furnace에서 carbon black으로 packing 하여 액상형성 온도 이상에서 소결하였다. 소결된 시편은 경면 연마하여 주사전자현미경으로 미세 조직을 관찰하였다. TiCN-30Co 조성 시편은 corner-round 모양의 입자 모양으로 소결 시간 증가에 따라 빠른 입자 성장을 나타내었다 .(7STiCN+2SWC)-30Co 조성 시변의 경우 일반적으로 보고된 바와 같이 core/shell 구조를 나타내었으며, core는 TiC-rich 상이었고, shell은 (Ti,W)(C,N) 복합 탄화물 상이었다. WC 함량이 중가함에 따라 입자의 corner-round 영역이 증가하였으며 (SOTiCN-SOWC)-30Co 조성 근처에서는 거의 둥근 형태의 입자 모양을 나타내었다. 또한 TiCN - 30Co 조성 시편에 비하여 WC가 첨가된 시펀들은 작은 평균입자크기를 나타내었다. 본 연구의 결과는 shell 영역 조성 변화는 계면에너지 이방성과 기지상 내의 펑형 입자 모양을 변화시키고 나아가 입자 성장 속도 에도 영향을 미친다는 것을 보여준다.
Layer-by-layer 방법을 기초로 기존의 방법보다 간단히 합성된 껍질 두께를 달리한 속이 빈 구형체인 폴리아닐린과 폴리피롤을 리튬이차전지 양극 활물질로 사용하여 껍질 두께에 따른 방전용량에 미친 효과를 조사하였다. 유화중합으로 중합된 음이온계 계면활성제에 의해 표면 개질 된 폴리스타이렌을 지지체로 사용하였다. 아닐린과 피롤의 모노머 양을 각각 다르게 추가하여 합성하여 쉘 두께를 조절하였다. 그 후, 유기용매를 통해 폴리스타이렌을 제거하여 속이 빈 구형체를 제조하였다. 이는 리튬이차전지에서 전해액과의 접촉을 증가시키기 위해 넓은 표면적을 가진 속이 빈 구형체 구조로 제조하고, 분자량 조절이 어렵고 단위부피당 질량이 낮아 용량이 낮은 단점을 가진 고분자를 껍질 두께의 조절로 단점을 보완하고자 하였다. 아닐린 모노머 양을 1.2, 2.4, 3.6, 4.8 및 6.0 mL로 증가시킨 경우 폴리아닐린의 껍질 두께는 30.2, 38.0, 42.2, 48.2 및 52.4 nm이고 피롤 모노머 양이 0.6, 1.2, 2.4 및 3.6 mL일 경우 양극재료는 폴리아닐린의 경우 껍질 두께가 30.2, 42.2 및 52.4 nm 일 때, 10회 후, 방전 용량은 약 ~18, ~29 및 ~62 mAh/g으로 나타났으며, 폴리피롤의 경우 껍질 두께가 16.0, 22.0, 27.0 및 34.0 nm 일 때, 15회 후, 방전용량은 약 ~15, ~36, ~56 및 ~77 mAh/g으로 껍질의 두께가 증가할수록 방전용량 역시 증가하는 것을 알 수 있었다.
This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.
본 논문에서는 샌드위치 복합재 패널로 제작되는 사용후 핵연료 수송용기 충격완충체의 유효등가 유한 요소모델을 제시하는데 목적을 둔다. 샌드위치 복합재 패널은 금속재 면재와 각각 우레탄 폼, 발사목 그리고 레드우드 심재로 구성되었다. 충격완충체의 유효등가 유한요소 모델은 샌드위치 복합재 패널의 저속충격 시험과 해석결과와의 비교를 통해 제시되었으며, LS-DYNA 3D를 사용한 동적 외연 유한요소해석에 의해 수행되었다. 시험과 해석 결과, 충격완충체 샌드위치 패널의 유한요소 모델은 적층쉘 요소의 면재와 솔리드요소의 심재를 사용한 기존의 혼합모델링 기법에 비해 면재와 심재 모두 솔리드 요소를 적용하는 방법이 더 정확한 결과를 나타냄을 확인하였다. 이때 발사목과 레드우드 심재는 요소제거 기능을 갖는 솔리드 요소로 모델링 되는 것이 추천되어진다.
본 연구에서는 평균 입자크기가 100 nm인 $BaTiO_3$ 나노 결정체의 결정 구조를 전자회절을 이용하여 분석하였다. 전자회절을 이용하여 구조분석을 수행하기 위해 PED 장치의 실험인자를 보정한 후, PED와 일반적인 SAED를 이용하여 전자회절도형을 획득하여 비교 분석을 수행하였다. $BaTiO_3$ 나노 결정체에 대해 PED를 이용한 구조분석을 수행한 결과, $BaTiO_3$ 나노입자는 상온에서 입방정계와 정방정계의 구조가 혼합되어 존재함을 알 수 있었다. 또한 이론적 계산을 통해 두 상이 혼재된 $BaTiO_3$ 나노입자는 입방정계의 구조가 약 8.5nm의 표면을 형성하고 있는 coreshell 구조를 이루고 있음을 예측할 수 있었다. 이러한 $BaTiO_3$ 나노입자에 대한 입방정계와 정방정계 구조의 각각의 격자상수는 a=3.999${\AA}$과 a=3.999${\AA}$, c=4.022${\AA}$이었다. 이와 같이 일반적인 SAED에 비해 뛰어난 공간분해능과 다중산란 효과를 억제할 수 있는 PED 기법은 복합 나노 구조체의 결정구조분석에 보다 유용한 분석 기술로 활용할 수 있을 것으로 기대된다.
본 연구에서는 양자 역학 계산 이론 중 하나인 Density Functional Theory (DFT)를 사용하여 $Pd/Pd_3Fe$ 촉매 표면에서 개미산(HCOOH) 분해 반응으로부터 수소를 생산하는 반응 메커니즘을 분석하였다. 기존 연구에 따르면, 단일 원자 촉매 중에서 개미산 분해 반응에 가장 높은 수소 생산성을 기록하는 원자는 Pd 촉매이지만, 부 반응으로 생산되는 CO가 Pd에 독성을 띄우기 때문에 Pd 촉매의 성능을 저하시킨다. 이러한 단점을 극복하고자, Pd를 기반으로 Pd와 Fe를 3:1로 합금하여 $Pd_3Fe$가 코어(core) 형태로 존재하고 Pd가 표면에 위치한 core-shell $Pd/Pd_3Fe$ 촉매를 설계하여 개미산 분해 반응에 의한 수소 생산 속도를 계산하였다. 순수 Pd촉매 보다 $Pd/Pd_3Fe$ 촉매의 수소 생산 반응의 활성 에너지가 감소하였다. 그 이유는 Pd와 Fe가 합금화 되면서 $Pd_3Fe$의 격자 상수가 $2.76{\AA}$로 줄어 들어 HCOO의 흡착에너지를 0.03 eV 감소시켰고, Fe에서 표면 Pd로 전자가 이동하면서 표면 전자 구조가 변화하여 HCOO의 흡착에너지를 0.29 eV 낮추었기 때문이다. 본 연구에서 제안하는 결과를 바탕으로 추후 개미산으로부터 수소 생산이 더 용이한 새로운 촉매 설계 메커니즘을 제안하고자 한다.
라이소자임이 내포된 폴리감마글루탐산(PGA)의 서브-마이크론 크기의 미세입자를 압력, 온도, 노즐내경, 농도 등을 변화시켜가면서 초임계 반용매 침전법 (SAS)으로 제조하였다. SAS법의 전체적인 결과는 압력이 클수록, 온도가 낮을수록, 노즐 내경이 작을수록, 농도가 묽을수록 작은 입자가 얻어졌다. FT-IR로 분석한 결과, 본래 초기의 PGA:라이소자임:50 : 50의 조성비는 SAS 공정을 거치면서 최종 분말 입자 내에서는 33 : 67로 변화하였다. 이것은 PGA가 라이소자임보다 탄산가스/디메틸설폭사이드(DMSO) 혼합용매에 더 높은 용해도를 가지기 때문인 것으로 추측된다. 또 이러한 용해도 특성 때문에 생성 입자는 핵-껍질 구조를 갖고 있으며, 핵 부분은 라이소자임이 구성하는 것으로 여겨진다. 생성된 분말 입자 내에는 $7.8\times10^{-3}wt%$의 농도로 미량의 DMSO가 잔존하고 있음이 밝혀졌다.
본 연구에서는 서로 다른 환원제를 사용하여 라이다 센서에 인식 가능한 검은색 중 공구조 물질을 합성하고 라이다 인식률을 비교하였다. 먼저, 실리카/티타니아 코어/쉘(WST) 물질을 졸-겔법을 통해 제조한 후 아스코르브산(AA)과 수소화붕소나트륨(SB)을 사용하여 환원하였다. 이후, 실리카 코어를 제거하여 두 가지의 다른 검은색 중공구조(AA-BHT 및 SB-BHT) 물질을 제조하였다. AA-BHT의 명도(L*)와 NIR 반사율(R%)은 각각 약 19.1과 34.5 R%로 측정되었고, SB-BHT는 약 11.5와 31.8 R%로 검출되었다. AA-BHT는 SB-BHT에 비해 NIR 반사율이 높았으나 색상은 명도가 높은 검은색으로 나타났다. AA-BHT와 SB-BHT는 중공구조로 제조되어 코어/쉘 물질 대비 높은 근적외선 반사율을 나타냈으며, 이는 공기와 검은색 티타니아의 계면 사이에서 발생하는 프레넬의 반사 원리에 기인하였다. 본 연구 결과를 통해 두 물질 모두 다양한 환원법을 통해 성공적으로 검은색으로 제조되었으며, 상용화된 라이다 센서에 효과적으로 인지되어 미래의 자율주행차량용 검은색 물질로의 적합성을 나타내었다.
This paper concerns with the finite element analysis of reactor internals with structural faults. For investigating the influence of hold-down spring faults on dynamic characteristics of CSB (core support barrel), reactor internals of Ulchin-1 nuclear power plant are modeled using finite element method and simulated with artificial defects on the hold-down springs. To prove the validity of the finite element models, the calculated natural frequencies of CSB in normal state are compared with those from the measurement results, which shows good agreement. According to results of finite element analysis, CSB beam mode natural frequency decreases by 4.5% in the case of 10% partial relaxation of hold-down springs, and decreases by 18.4% in the case of 20%. The range of shell mode natural frequency change is within 5.3%.
A 120-cm core recovered from Lake Hovsgol, the northern Mongolia provides evidence for climate variability since the Marine Isotope Stage 3, representing a sharp lithological change. The lowermost part of the core consists of diatom-barren calcareous silty clay without coarse sands, framboidal pyrite, and biogenic components deposited during the MIS 3. Following the last glacial maximum, in-situ moss is included in the sediments, as lake-level was retreated by cold and dry environment with low precipitation. The AMS radiocarbon ages of the plant fragments match a marked lithologic boundary between 14,060 and 14,325 $^{14}C$ yr BP. The contents of coarse sands abruptly increase, indicating probably wind-derived sandy dust or coarse grains contributed from floating icebergs. And abundant framboidal pyrite grains were deposited in an anoxic environment, as reflected by high accumulation of organic matters at a low lake stand. During the deglaciation, quantities of coarse sands, ostracod, shell fragments, framboidal pyrite, and diatom markedly varies by regional and global scale climate regimes. Some allochthonous coarse sands were probably ice-rafted debris derived from floating icebergs. A rapid increase in diatom productivity probably marked the onset of Bolling-Allerod warming. Subsequent high concentration of framboidal pyrite probably represents a dry and cold condition, such as Younger Drays events. Consistent warm period with high precipitation at Holocene is documented by diatomaceous clayey ooze without framboidal pyrite, coarse sands, and ostracod.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.