• Structural Engineering and Mechanics
• /
• 제28권1호
• /
• pp.39-52
• /
• 2008

Column shear failures observed during recent earthquakes and experimental data indicate that shear deformations are typically associated with the amount of transverse reinforcement, column aspect ratio, axial load, and a few other parameters. It was shown that in some columns shear displacements can be significantly large, especially after flexural yielding. In this paper, a piecewise linear model is developed to predict an envelope of the cyclic shear response including the shear displacement and corresponding strength predictions at the first shear cracking, peak strength, onset of lateral strength degradation, and loss of axial-load-carrying capacity. Part of the proposed model is developed using the analysis results from the Modified Compression Field Theory (MCFT). The results from the proposed model, which uses simplified equations, are compared with the column test data.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.91-100
• /
• 2008

본 연구에서는 Mohr-Coulomb 파괴기준에 따라 고결모래의 전단강도를 유도하고, 삼축 및 일축압축시험으로 검증하였다. 모래의 마찰각은 고결의 영향을 받지 않으며, 일정구속압 이하에서 고결모래의 점착력은 고결정도에 따라 일정하다. 따라서 고결모래의 전단강도는 미고결 모래의 전단강도와 고결모래의 일축압축강도의 합으로 표현되며, 고결모래의 점착력은 마찰각과 일축압축강도의 함수로 표현되었다. 또한 고결결합 파괴구속압 이후인 전이구간에서 고결모래의 전단강도는 비교적 일정하게 유지된다고 가정하여 전이구간에서 고결모래의 전단강도와 점착력을 유도하였다. 추정된 고결모래의 전단강도와 점착력은 실험결과와 잘 일치하였다. 실험 결과는 또한 고결모래의 점착력 변화에 큰 영향을 미치는 고결결합 파괴구속압이 일축압축강도와 선형비례관계임을 보여준다.

• Structural Engineering and Mechanics
• /
• 제39권3호
• /
• pp.361-382
• /
• 2011

This paper presents the results of an investigation on shear strengthening of RC beams externally reinforced with CFRP composite. A total of six full-scale beams of four CFRP strengthened and two unstrengthened were tested in the absence of internal stirrups in the shear span. The strengthening configurations contained two styles: discrete uniformly spaced strips and customized wide strips over B-regions. The composite systems provided an increase in ultimate strength as compared to the unstrengthened beams. Among the three layouts that had the same area of CFRP, the highest contribution was provided by the customized layout that targeted the B-regions. A comparative study of the experimental results with published empirical equations was conducted in order to evaluate the assumed effective strains. The empirical equations were found to be unconservative. Nonlinear finite element (NLFE) models were developed for the beams. The models agreed with test results that targeting the B-region was more effective than distributing the same CFRP area in a discrete strip style over shear spans. Moreover, the numerical models predicted the contribution of different configurations better than the empirical equations.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.158-163
• /
• 2005

This paper is focusing on the model to predict the ultimate shear strength on joints of composite system (RCS) with reinforced concrete columns and steel beams considering the transverse beam. It reviews the ratio of experimental shear strength to design strength calculated by existing desist equations which are proposed by Kanno, Wight, Noguchi and the rising of strength by the transverse beams. When the shear strength of joints is estimated, it is necessary to do research work for the stress transfer mechanism considering two concrete strut of inner and outer panel by web of the transverse beam. In order to confirm it requires further experimental and analytical study.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.874-882
• /
• 2002

현재, 깊은 보의 전단설계는 보통강도 콘크리트를 사용한 일반 보의 사인장 균열내력에 대한 실험식인 ACI 기준에 기본을 두고 시행되고 있지만, 고강도 철근콘크리트 깊은 보의 전단거동에 대한 자료는 매우 제한적이다. 따라서, 본 실험연구의 목적은 고강도 철근콘크리트 깊은 보의 전단거동을 이해하고 ACI 설계 기준의 안전율을 파악하기 위한 것이다. 상부 2점 대칭하중을 받는 22개의 고강도 콘크리트 깊은 보의 전단내력에 대한 실험결과를 나타내었다. 콘크리트 압축강도는 800kgf/$\textrm{cm}^2$이며, 주요 변수로는 전단경간비, 전단철근의 양 및 배근 형태 등이다. 실험결과로부터 전단철근의 전단저항에 대한 효율성은 ACI 기준에서 제시하는 순 경간깊이비(1n/d) 보다는 전단경간비가 크게 관계되었으며 전단경간비가 0.75 이상에서 수직 전단철근이 수평 전단철근보다 전단저항에 더 효율적이었다. 고강도 철근콘크리트 깊은 보의 전단내력을 예측하기 위하여 실험결과들과 전단마찰이론에 근거해서 ACI 기준식을 수정, 제시하였다.

• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.305-312
• /
• 2014

콘크리트 깊은 보의 전단강도 산정을 위해 현행 미국콘크리트학회(ACI) 및 캐나다표준규격협회(CSA), 유럽콘크리트위원회(CEB-FIP)의 설계기준은 스트럿-타이 모델을 이용할 것을 제안하고 있지만 설계의 품질이 설계자가 구성한 트러스 모델 적합성에 크게 좌우된다는 특징을 가지고 있다. 따라서 본 논문에서는 내부 트러스 모델에 따른 현행 ACI, CSA 및 CEB-FIP의 콘크리트 깊은 보 설계기준의 타당성을 홍성걸 등에 의해 제안된 콘크리트 소성학에 근거한 전단강도식의 예측치와 비교함으로써 평가한다. 비교 결과 ACI, CSA 및 CEB-FIP의 스트럿-타이 모델에 의해 설계된 깊은 보의 경우 내부 트러스 모델이 전단강도 예측에 중요한 영향을 미치는 것으로 나타났으며 CEB-FIP의 경우 가장 높은 스트럿 강도 예측치를 보였다.

• 콘크리트학회지
• /
• 제3권3호
• /
• pp.141-148
• /
• 1991

본 논문은 전단보강이 없는 강섬유보강 고강도 철근콘크리트보의 전단거동에 관한 연구로서 전단스팬비(a/b), 섬유첨가율(Vf)의 변화에 사인장균열 전단응력 및 극한전단응력의 변화를 관찰하였다. 실험결과 섬유첨가율이 증가할수록, 전단스팬비가 감소할수록 사인장균열 전단응력 및 극한전단응력이 증가함을 보여주고 있으며, 특히 섬유첨가율이 증가함에 따라 섬유의 균열억제거동에 의해 극한전단응력이 높게 증가함을 볼 수 있다. 본 연구에 의한 실험결과를 바탕으로 각 변수에 따른 사인장균열 전단응력 및 극한전단응력에 대한 실험식을 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.113-116
• /
• 2004

No specific guidelines are for computing the shear strength of steel coupling beam connections embedded in the reinforced concrete shear wall. In this paper, a theoretical study of the strength of hybrid coupled shear wall connections is achieved. The bearing stress at failure in the concrete below the steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the steel coupling beam section to the thickness of the hybrid coupled shear wall. To revise factor affecting shear transfer strength across connections between coupled shear walls and steel coupling beam, experimental studies are achieved. The main test variables were auxiliary details of stud bolts. In this studies, these proposed equations are shown to be in good agreement with the test results reported in the paper and with other test data in the literature.

• Computers and Concrete
• /
• 제15권6호
• /
• pp.935-950
• /
• 2015

The aim of this study is to provide experimental data regarding the compressive, shear and torsional strength of self-compacting concrete (SCC) used in rectangular beams, and then comparing the results with the equations presented by the CSA A23.3-04 and ACI 318-11. In fact, the gathered information in this field is quite useful for calibrating the computer models of other researchers. The other goal of this study was to investigate the effects of silica fume and superplasticizer dosages on the mechanical properties of SCC. In this research, SCC is made based on 16 different type mixing layout. Also two normal concrete (NC) or vibrating concrete are constructed to compare the results of SCC and NC. This work concentrated on concrete mixes having water/binder ratios of 0.45 and 0.35, which contained constant total binder contents of $400kg/m^3$ and $500kg/m^3$, respectively. The percentages of silica fume that replaced cement were 0% and 10%. The superplasticizer dosages utilized in the mixtures were 0.4%, 0.8%, 1.2% and 1.6% of the weight of cement. Beam dimensions used in this test were $30{\times}30{\times}120cm^3$. The results of this research indicated that shear and torsional strength of SCC beams to be used in computer models can be calculated utilizing the equations presented in CSA A23.3-04 and ACI 318-11.

• Steel and Composite Structures
• /
• 제17권6호
• /
• pp.907-927
• /
• 2014

Ultra-lightweight cement composite (ULCC) with a compressive strength of 60 MPa and density of $1450kg/m^3$ has been developed and used in the steel-concrete-steel (SCS) sandwich structures. ULCC was adopted as the core material in the SCS sandwich composite beams to reduce the overall structural weight. Headed shear studs working in pairs with overlapped lengths were used to achieve composite action between the core material and steel face plates. Nine quasi-static tests on this type of SCS sandwich composite beams were carried out to evaluate their ultimate strength performances. Different parameters influencing the ultimate strength of the SCS sandwich composite beams were studied and discussed. Design equations were developed to predict the ultimate resistance of the cross section due to pure bending, pure shear and combined action between shear and moment. Effective stiffness of the sandwich composite beam section is also derived to predict the elastic deflection under service load. Finally, the design equations were validated by the test results.