• 제목/요약/키워드: shear strength correction factor

검색결과 11건 처리시간 0.027초

FRP Bar를 휨 및 전단보강근으로 사용한 콘크리트 보의 전단강도 (Shear strength of concrete beam using FRP Bars for flexure and shear reinforcements)

  • 박현영;장희석;김명식;김희성
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
    • /
    • pp.399-402
    • /
    • 2005
  • This paper presents shear strength of concrete beam using FRP bars for flexure and shear reinforcements. Generally, the material properties of FRP bar are different from steel reinforcement. So, the shear strength correction factor is proposed through the experimental results.

  • PDF

Investigation of dynamic P-Δ effect on ductility factor

  • Han, Sang Whan;Kwon, Oh-Sung;Lee, Li-Hyung
    • Structural Engineering and Mechanics
    • /
    • 제12권3호
    • /
    • pp.249-266
    • /
    • 2001
  • Current seismic design provisions allow structures to deform into inelastic range during design level earthquakes since the chance to meet such event is quite rare. For this purpose, design base shear is defined in current seismic design provisions as the value of elastic seismic shear force divided by strength reduction factor, R (${\geq}1$). Strength reduction factor generally consists of four different factors, which can account for ductility capacity, overstrength, damping, and redundancy inherent in structures respectively. In this study, R factor is assumed to account for only the ductility rather than overstrength, damping, and redundancy. The R factor considering ductility is called "ductility factor" ($R_{\mu}$). This study proposes ductility factor with correction factor, C, which can account for dynamic P-${\Delta}$ effect. Correction factor, C is established as the functional form since it requires computational efforts and time for calculating this factor. From the statistical study using the results of nonlinear dynamic analysis for 40 earthquake ground motions (EQGM) it is shown that the dependence of C factor on structural period is weak, whereas C factor is strongly dependant on the change of ductility ratio and stability coefficient. To propose the functional form of C factor statistical study is carried out using 79,920 nonlinear dynamic analysis results for different combination of parameters and 40 EQGM.

FRP Bar 콘크리트 보의 휨보강근비 변화에 따른 콘크리트 전단강도 (Concrete Shear Strength of FRP Bar Reinforced Concrete BeamAccording to Variation of Flexural Reinforcement Ratio)

  • 노경배;진치섭;장희석;김희성;황금식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권2호
    • /
    • pp.76-82
    • /
    • 2006
  • 휨철근 대체재로 FRP Bar를 사용한 콘크리트 보에 대하여 휨보강근비의 변화에 따른 콘크리트의 전단강도를 일련의 콘크리트 보 실험을 통하여 조사하였다. 실험 결과, 콘크리트의 전단강도는 RC보의 경우보다는 낮은 값으로 나타났지만, 휨보강근비가 증가함에 따라 전단강도도 증가하는 것으로 분석되었다. 문헌에 제안된 식과 실험결과의 회귀분석을 이용하여 FRP Bar의 종류 및 휨보강근비를 고려한 전단강도보정계수를 제안하였다.

FRP 보강근을 사용한 콘크리트 보의 콘크리트 전단강도 (Concrete Shear Strength of FRP Reinforced Concrete Beam)

  • 조재민;장희석;김명식;김충호
    • 대한토목학회논문집
    • /
    • 제29권3A호
    • /
    • pp.259-266
    • /
    • 2009
  • 본 연구에서는 전단보강이 없는 FRP 보강근을 사용한 콘크리트 보의 제작 및 파괴실험을 통하여 FRP bar와 철근의 탄성계수비, 휨보강근비 및 전단지간비의 영향을 동시에 고려하여 콘크리트 전단강도를 평가할 수 있는 수식을 제안하였다. 실험변수로서 2종류의 FRP bar, 3종류의 전단지간비 및 3종류의 휨보강근비를 사용하였으며, 총 36개의 FRP 보강근을 사용한 콘크리트 보를 제작하고 4점 휨 실험을 수행하였다. 전단지간비의 영향을 상세히 분석하기 위하여 앞서 연구된 2종류의 전단지간비에 대한 실험결과를 인용하였다. 실험자료들을 회귀분석하여 콘크리트 전단강도 계산에 필요한 전단강도보정계수를 구하는 수식을 제안하였다. 제안된 수식의 검증을 하기 위하여 여러 문헌으로부터 조사된 31개의 실험결과에 대하여 본 연구의 제안식과 다른 연구자들이 제안한 수식들을 함께 적용하여 비교 분석하였다. 그 결과, 본 연구에서 제안된 수식은 실험결과에 가장 근접하는 결과를 주는 것을 알 수 있었다.

A NEW CPT-BASED METHOD FOR UNDRAINED SHEAR STRENGTH ESTIMATION OF CLAYS

  • Lee, Jun-Hwan
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회 3차
    • /
    • pp.18-23
    • /
    • 2010
  • The estimation of the undrained shear strength $s_u$ for clays using CPT results has been mainly based on the cone factor $N_k$. In this study, a new CPT-based method for the estimation of the undrained shear strength $s_u$ is presented. This aims at reducing uncertainties for the estimation of $s_u$ and enhancing the application of CPT results in more effective manner. For this purpose, a site located at a marine clay deposit is selected and test results from extensive experimental testing program are adopted. The new method defines a direct correlation between the undrained shear strength $s_u$ and the cone resistance $q_t$, excluding the procedure of the overburden pressure correction and therefore undisturbed soil sampling process. In order to verify the new CPT-based method, additional test sites and example sites from literature, which consist of a variety of soil conditions, are selected and examined. It is observed that values of su obtained from the proposed method are in good agreements with measured values of $s_u$ for all the selected verification cases.

  • PDF

사질지반에서 액상화 저항에 대한 선행전단응력의 영향 (Preshear Influence for Liquefaction Resistance in Sand)

  • 윤여원;김한범;김방식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.315-322
    • /
    • 2003
  • Cyclic simple shear tests were performed to find out the effect of preshear on dynamic strength of the sandy soil. Tests were performed for the specimens with 40% and 60% of relative density, under three different effective vertical stress of 50, 100 and 200kPa. For 50 and 100kPa, preshear ratios 0.00, 0.08, 0.12 and 0.16 were given, respectively, For low and high relative densities, two different results are shown in dynamic tests. Under the dense conditions, the maximum shear stress ratio($\tau$$\_$cyc//$\sigma$$\_$vo/) and the cyclic shear stress ratio($\tau$$\_$cyc//$\sigma$$\_$vo/) causing a certain shear strain increase with augmenting preshear ratio(${\alpha}$). However, the maximum shear stress ratio and the cyclic shear stress ratio increase or decrease with increasing preshear ratio under the loose conditions. Correction factor(K$\_$${\alpha}$/) for preshear increases at an early stage and then decreases with increasing preshear ratio at loose condition and increase with increasing preshear ratio at dense condition. Correction factor (K$\_$${\alpha}$,Max/) for preshear increases with the increasing preshear ratio irrespective of relative density, and the value of has same behavior as K$\_$${\alpha}$/.

  • PDF

Strain interaction of steel stirrup and EB-FRP web strip in shear-strengthened semi-deep concrete beams

  • Javad Mokari Rahmdel;Erfan Shafei
    • Steel and Composite Structures
    • /
    • 제47권3호
    • /
    • pp.383-393
    • /
    • 2023
  • Conventional reinforced concrete design codes assume ideal strain evolution in semi-deep beams with externally bonded fiber-reinforced polymer (EB-FRP) web strips. However, there is a strain interaction between internal stirrups and web strips, leading to a notable difference between code-based and experimental shear strengths. Current study provides an experiment-verified detailed numerical framework to assess the potential strain interaction under quasi-static monotonic load. Based on the observations, steel stirrups are effective only for low EB-FRP amounts and the over-strengthening of semi-deep beams prevents the stirrups from yielding, reducing its shear strength contribution. A notable difference is detected between the code-based and the study-based EB-FRP strain values, which is a function of the normalized FRP stress parameter. Semi-analytical relations are proposed to estimate the effective strain and stress of the components considering the potential strain interaction. For the sake of simplification, a linearized correction factor is proposed for the EB-FRP web strip strain, assuming its restraining effect as constant for all steel stirrup amounts.

콘크리트 비충전 강합성 바닥판의 유효폭 평가 (Evaluation on Effective Width of Concrete Unfilled Composite Steel Grid Deck)

  • 박영훈;이승용
    • 대한토목학회논문집
    • /
    • 제37권3호
    • /
    • pp.521-529
    • /
    • 2017
  • 본 연구에서는 합성형교와는 다른 전단연결 상세를 가지는 콘크리트 비충전 강합성 바닥판의 유효폭을 수치적으로 분석하였다. 유효폭 산정 방법 및 위치, 작용하중 크기, 메인 베아링 바 간격-지간장비에 따른 콘크리트 비충전 강합성 바닥판의 유효폭을 평가하였다. 분석 결과 응력 형태를 사다리꼴로 이상화하여 유효폭을 산출하여도 실제 유효폭과 거의 동일한 것으로 분석되었다. 또한, 전단 강도 증가를 위해 적용된 전단홀 관통 철근이 유효폭을 증가 시키는 역할을 하는 것으로 나타났다. 메인 베아링 바 간격-지간장비에 따른 유효폭 분석 결과로부터 콘크리트 비충전강합성 바닥판의 유효폭비를 산출 할 수 있는 보정 계수를 제안하였다.

선형 모멘트 구배가 작용하는 파형강판 I-거더의횡-비틂 좌굴 강도 (Lateral-Torsional Buckling Strength of I-girder with Corrugated Steel Webs under Linear Moment Gradient)

  • 문지호;임남형;이학은
    • 대한토목학회논문집
    • /
    • 제32권3A호
    • /
    • pp.149-160
    • /
    • 2012
  • 파형강판은 보강재 없이 높은 전단 저항력을 가지며, 보강재를 생략함으로써 상부구조의 용접을 최소화하고 피로 성능을 향상시킨다. 이러한 장점으로 인하여 최근에 파형강판을 I-거더의 복부판으로 사용하려는 연구가 여러 연구자들에 의하여 수행되었다. 횡-비틂 좌굴은 I-거더를 설계함에 있어 주요한 설계인자이지만 불균일 모멘트와 같은 실제 하중이 작용하는 파형강판 I-거더의 횡-비틂 좌굴에 관한 연구는 현재 미흡한 실정이므로 이에 대한 연구가 필요하다. 본 연구에서는 파형강판 I-거더의 횡-비틂 좌굴 강도에 관한 연구를 수행하였다. 먼저 선형 모멘트 구배가 작용하는 파형강판 I-거더의 탄성 횡-비틂좌굴 거동에 관한 연구를 유한요소해석을 통하여 수행하였다. 본 연구 결과, 파형강판 I-거의 탄성 횡-비틂 좌굴 거동은 파형강판의 파형 주기수에 따라 달라지는 것을 알 수 있었으며, 선형 모멘트 구배가 작용하는 파형강판 I-거더에 대한 모멘트 구배 수정 계수를 제안하였다. 이 후 비탄성 유한요소해석 결과와 일반 I-거더의 설계 방법을 이용하여 파형강판 I-거더의 비탄성 좌굴 강도에 관하여 연구를 수행하였다.

대수누선파양에 대한 확률론적 3차원 사면안정해석 (Probabilistic Three-Dimensional Slope Stability Analysis on Logarithmic Spiral Failure)

  • 서인석;김영수
    • 한국지반공학회지:지반
    • /
    • 제10권2호
    • /
    • pp.121-140
    • /
    • 1994
  • 본 연구에서 경계가 불규칙하고 여러 토층으로 이루어진 자연과 인공 사면에 대한, 토층의 경계에서 굴절하는 대수나선곡선을 파괴면으로 가정한 신뢰도해석 모델을 개발하였다. 이 모델에서, 사면파괴토괴는 양 끝단이 수직평면으로 된 일정한 폭을 가진 Cylindroid로 가정하여 절편법을 적용하였고, 강도정수의 공간적인 변화, 불충분한 시료의 수에 의한 오차 그리고 실험실과 현장조건의 차이에서 오는 모델오차를 고려하여, FOSM 그리고 SOSM의 방법으로 신뢰도 지수를 구하여 파괴확률을 구하는 프로그램을 개발하였다. 이러한 연구를 기초로 다음의 결과를 얻었다: (1) 내부마찰각의 변동계수가 점착력의 변동계 수보다 민감하게 영향을 미침을 보여주었다. 따라서 대수나선파괴면의 사면안정해석에서 내부마 찰각의 불확실성이 사면안정에 더 큰 영향을 주므로 내부마찰각의 추정에 더 큰 주의를 기울여야할 것으로 사료된다. (2) 지진이 없을 경우에는, 사면폭이 증가함에 따라 전체 3차원파괴확률과 한계파괴폭은 증가하였으며, 지진이 있을 경우에는 전체 3차원파괴확률은 증가하였으나 한계 파괴폭은 전체 사면폭이 비교적 클 때, 진도가 커짐에 따라 급격히 감소하였다. (3) 지하수위는 높을수록, 전단강도와 수정계수는 작을수록 사면의 한계폭을 감소시키는 효과가 있다.

  • PDF