• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.193-200
• /
• 2009

We present a direct simulation technique for two-dimensional mold-filling simulations of fluids filled with a large number of circular disk-like rigid particles. It is a direct simulation in that the hydrodynamic interaction between particles and fluid is fully considered. We employ a pseudo-concentration method for the evolution of the flow front and the DLM (distributed Lagrangian multipliers)-like fictitious domain method for the implicit treatment of the hydrodynamic interaction. Both methods allow the use of a fixed regular discretization during the entire computation. The discontinuous Galerkin method has been used to solve the concentration evolution equation and the rigid-ring description has been introduced for freely suspended particles. A buffer zone, the gate region of a finite area subject to the uniform velocity profile, has been introduced to put discrete particles into the computational domain avoiding any artificial discontinuity. From example problems of 450 particles, we investigated the particle motion and effects of particles on the flow for both Newtonian and shear-thinning fluid media. We report the prolonged particle movement toward the wall in case of a shear-thinning fluid, which has been interpreted with the shear rate distribution.

• Steel and Composite Structures
• /
• 제3권5호
• /
• pp.321-331
• /
• 2003

The paper presents the results of an experimental investigation conducted on welded tubular joints, that are employed in offshore platforms, to study the behaviour and strength of these joints under axial brace compression loading. The geometrical configuration of the joints tested were T and Y. The nominal diameter of the chord and brace members of the joint were 324 and 219 mm respectively. The chord thickness was 12 mm and the brace 8 mm. The tested joints are approximately quarter size when compared to the largest joints in the platforms built in a shallow water depth of 80 m in the Bombay High field. Some of the joints were actually fabricated by a leading offshore agency which firm is directly involved in the fabrication of prototype structures. Strength of the internally ring-stiffened joints was found to be almost twice that of the unstiffened joints of the same configuration and dimensions. Bending of the chord as a whole was observed to be the predominant mode of deformation of the internally ring-stiffened joints in contrast to ovaling and punching shear of the unstiffened joints. It was observed in this investigation that unstiffened joint was stiffer in ovaling mode than in bending and that midspan deflection of unstiffened joint was insignificant when compared to that of the internally ring stiffened joint. The measured midspan deflection of the unstiffened joint in this investigation and its relation with the applied axial load compares very well with that predicted for the brace axial displacement by energy method published in the literature. A comparison of the measured deflection and ovaling of the unstiffened joint was made with that published by the author elsewhere in which numerical prediction of both quantities have been made using ANSYS software package. The agreement was found to be quite good.

• 한국도로학회논문집
• /
• 제1권2호
• /
• pp.121-133
• /
• 1999

본 논문은 국내 정유사에서 생산되는 도로 포장용 아스팔트에 대하여 노화에 따른 거동 특성을 파악하였다. 이를 위해 국내의 5개 정유회사에 생산되는 두가지 등급의 아스팔트 제품(침입도 85-100, 침입도 60-70)을 포함한 총 9종에 대하여 노화 단계별(노화 이전, 단기노화, 장기노화)로 국내 스트레이트 아스팔트의 침입도$(25^{\circ}C)$, 점도$(50^{\circ}C\;135^{\circ}C)$, 연화점, 및 DSR 시험$(-20^{\circ}C\sim30^{\circ}C)$을 수행하여, 아스팔트의 물성 변화 특성을 고찰하였다. 연구 결과, 국내 스트레이트 아스팔트의 거동은 고온($60^{\circ}C$근방) 및 상온$(10-30^{\circ}C)$범위에서 정유사 제품에 따라 상당한 차이를 나타내었으며, 저온의 경우에는 정유사 제품이나 등급에 관계없이 거의 유사한 거동을 나타내었다. 따라서 어느 정유사의 아스팔트를 사용하는가에 따라, 저온에서의 온도 균열에 대한 저항성은 다소 비슷한 수준일 것으로 판단되지만, 소성변형 및 피로 균열에 대한 저항성이 상이하게 나타날 것으로 판단된다.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.593-610
• /
• 1996

The objective of this paper was to evaluate the shear bond strength of luting glass ionomer cement with defferent calcium based solution treatment on dentin surface. 120 extracted human teeth were classified into 12 group based on presence of smear layer on dentin surface and type of treatment solution. Smear layer remove on dentin surface was done using 6% citric acid for 60 seconds. Five different dentin surface treatment solutions(calcium acetate, calcium carbonate, clacium chlorided, calcium hydroxide, and calcium phosphate) were evaluated in this study. After surface modification, metal ring(inner diameter : 3mm, depth : 1mm) was placed to expose the same dentin surface area and inner space was filled with luting glass ionomer cement according to the recommended procedure for stadard clinical procedure. The shear bond strength of glass ionomer cement was determined after 24 hours. SEM was used for the evaluation of the surface morphologic changes and EDAX analysis was done for determination of the change of the calcium contents of treated dentin. Follwing conclusion can be drawn : 1. In the group of the dentin surface with smear layer, the calcium carbonate solution was the most effective for the increase of the clacium content and the shear bond strength of glass ionomer cement to dentin surfaces. 2. In the group of the calcium carbonate treated dentin with msear layer, the shear bond strength was increased twice compared to the control group and cohesive failure mode was observed. 3. The shear bond strength of cement was increased significantly be the removal of smear layer using 6% citric aicd. However, additional calcium solution treatments were not effective for further bond strength increase. 4. The shear bond strength of cement was significantly improved by both of the removal of smear layer and the calcium solution treatment, and the former was more effective for bond strength improvement. 5. The smear layer removed/calcium solution treated groups showed dentinal tubule obstruction and crystal attachment in SEM evaluation. However, the shear bond strengths of these groups were not increased compared to the smear layer removed/no dentin treatment group.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1175-1188
• /
• 1988

본 연구에서는 조건와류를 추출하려면 우선 속도상관관계를 알아야 하는데, 이를 위하여 실험적 데이타와 이론적 모델을 모두 적용하였다. 전자는 Van Atta와 Chen의 그리드 난류에서의 등방성에 가까운 속도상관관계 데이터를 취하여 이용하였으 며, 후자는 Driscoll과 Kennedy의 난류에너지 스펙트럼 모델을 해석하여 적용하였다. 이 이론적 모델은 레이놀즈수를 변화시킬 수 있는 장점이 있으며, 특히 벽면근처에서 의 와동구조해석을 위해서는 레이놀즈수가 작은 조건와류가 필요하다. 조건와류의 반지모양의 와동은 이방성분포인 평균전단유동에 중첩되어 전체 와동장을 구성하는데, 난류유동의 vortex stretching과정에서 중요한 역할을 하는 머리핀 와동(hairpin vor- tex)과 비슷한 구조를 이 전체 와동에서 구할 수 있다. 이는 조건와류의 와동장의 크기와 평균전단에 의한 평균 와동장의 상호크기에 따라 결정되는데, 실제 난류유동장 에서 난류전달과 레이놀즈 응력과 밀접한 관계가 있다.

• 한국강구조학회 논문집
• /
• 제16권4호통권71호
• /
• pp.493-500
• /
• 2004

본 논문에서는 복합재료로 이루어진 원통형 쉘 구조물을 해석모델로 설정하였으며, 좌굴의 링 보강재 보강효과에 대해서 연구하였다. 유한요소법으로 해석을 수행하였으며, 보강재의 요소는 3차원 보요소를 사용하였고, 쉘 요소는 적용성이 뛰어난 평면쉘요소를 사용하였으며, 대체 전단 변형률장을 도입하여 잠김현상을 극복하였다. 본 연구에서 링 보강재는 횡리브(Rib)의 형태이다. 이러한 보강재가 원통형 쉘의 좌굴에 미치는 영향을 고찰하였다. 즉, 보강재의 위치 변화, 보강재의 크기 변화, 쉘의 변장비 변화, 쉘의 지점조건의 변화, 복합재료의 화이버 보강각도 변화 등 다양한 파라미터 연구를 통해서 쉘의 좌굴거동을 분석하였다. 여러가지 설계변수에 대한 보강된 쉘의 거동에 대한 정확한 이해로부터 효율적인 보강설계를 제시하고자 하였으며, 원통형 쉘의 좌굴해석시 좋은 참고자료로 활용할 수 있으리라 기대된다.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.307-313
• /
• 2010

본 논문에서는 지역난방에 사용되는 이형관인 벤드(bend)의 형상설계에 대한 연구를 수행하였다. 지역난방관은 강관(내부)과 폴리우레탄 보온재(중앙부) 그리고 고밀도폴리에틸렌 외관(외부)의 3개의 중공관으로 구성되며 일반적으로 $10{\sim}120^{\circ}C$ 온도범위의 물이 $16kgf/cm^2$의 내압을 가지면서 수송된다. 이에 따라 작동 중 발생하는 반복적인 열적-기계적 하중을 지탱할 수 있어야 한다. 보통 지역난방관의 벤드부에는 폼패드라고 부르는 신축흡수재가 덧씌워지는데 이 폼패드의 노후에 따른 문제가 종종 발생한다. 본 논문에서는 벤드부에서의 폼패드 노후 문제를 경감시키기 위한 대안으로 폼패드를 없앤 이중보온관의 형상 설계를 제안하였다. 제안된 설계는 벤드부 강관에 전단고리(shear ring)를 적용하는 방법으로 이때 전단고리의 최적치수는 다구찌 방법과 유한요소법을 적용하여 접근하였다. 그 결과로 전단고리의 두께와 높이, 개수 순으로 최적화 효과가 있음을 확언하였다.

• Korea-Australia Rheology Journal
• /
• 제18권4호
• /
• pp.171-181
• /
• 2006

We present a short review for authors' previous work on direct numerical simulations for inertialess hard particle suspensions formulated either with a Newtonian fluid or with viscoelastic polymeric fluids to understand the microstructural evolution and the bulk material behavior. We employ two well-defined bi-periodic domain concepts such that a single cell problem with a small number of particles may represent a large number of repeated structures: one is the sliding bi-periodic frame for simple shear flow and the other is the extensional bi-periodic frame for planar elongational flow. For implicit treatment of hydrodynamic interaction between particle and fluid, we use the finite-element/fictitious-domain method similar to the distributed Lagrangian multiplier (DLM) method together with the rigid ring description. The bi-periodic boundary conditions can be effectively incorportated as constraint equations and implemented by Lagrangian multipliers. The bulk stress can be evaluated by simple boundary integrals of stresslets on the particle boundary in such formulations. Some 2-D example results are presented to show effects of the solid fraction and the particle configuration on the shear and elongational viscosity along with the micro-structural evolution for both particles and fluid. Effects of the fluid elasticity has been also presented.

• Tribology and Lubricants
• /
• 제11권4호
• /
• pp.28-34
• /
• 1995

PTFE has good mechanical and chemical stability at wide temperature range, and more over, shows a low value of friction coefficient. On the other hand, it shows cold flow and high wear rate. However, these short comings can be overcome by adding various fillers. In this experiment, PTFE and polyimide powder were mixed into composite and its tribological characteristics was investigated. 100% polyimide was also tested for comparison. The countefface material was a stainless steel (SUS304). Friction and wear tester of ring-on-block type was used at room temperature and under atmosphere. After the wear test, the worn surfaces were examined by optical microscope. The test results show that PTFE-polyimide composite generates. the wear transfer film on both sides of the friction surfaces, and, the friction coefficient and the wear rates are relatively low. 100% polyimide generated little wear transfer films, showed high friction and wear rates, and also showed some problems of vibration and noise. It even damaged the stainless steel countefface. It was concluded that 100% polyimide does not generate transfer film well because its shear resistanbe is high and it stickslips, thus, friction coefficients and wear rates are high. In case of PTFE-polyimide composite, on the other hand, transfer film containing sufficient PTFE adheres and remains on both wear surfaces well enough because PTFE has low shear resistance. Polyimide particles in the composite were proved to be able to bear normal load and does not show stick-slip because they are covered with transfer film containing much PTFE.

• Earthquakes and Structures
• /
• 제26권6호
• /
• pp.463-475
• /
• 2024

The study aims to investigate the pounding that occurs between the isolator's ring and slider of isolated structures resulting from excessive seismic excitation, while considering soil-structure interaction. The dynamic responses and poundings of structures subjected a series seismic records were comparatively analyzed for three different soil types and fixed-base structures. A series of parametric studies were conducted to thoroughly discuss the effects of the impact displacement ratio, the FPB friction coefficient ratio, and the radius ratio on the structural dynamic response when considering impact and SSI. It was found that the pounding is extremely brief, with an exceptionally large pounding force generated by impact, resulting in significant acceleration pulse. The acceleration and inter-story shear force of the structure experiencing pounding were greater than those without considering pounding. Sudden changes in the inter-story shear force between the first and second floors of the structure were also observed. The dynamic response of structures in soft ground was significantly lower than that of structures in other ground conditions under the same conditions, regardless of the earthquake wave exciting the structure. When the structure is influenced by pulse-type earthquake records, its dynamic response exhibits a trend of first intensifying and then weakening as the equivalent radius ratio and friction coefficient ratio increase. However, it increases with an increase in the pounding displacement ratio, equivalent radius ratio, friction coefficient ratio, and displacement ratio when the structures are subjected to non-pulse-type seismic record.