• 제목/요약/키워드: shear induced structure

검색결과 140건 처리시간 0.031초

Numerical investigation on VIV suppression of marine riser with triangle groove strips attached on its surface

  • Wang, Wei;Song, Baowei;Mao, Zhaoyong;Tian, Wenlong;Zhang, Tingying
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제11권2호
    • /
    • pp.875-882
    • /
    • 2019
  • The effects of Triangle Groove Strips (TGS) on Vortex-induced Vibration (VIV) suppression of marine riser are numerically investigated using Computational Fluid Dynamics (CFD) method. The range of Reynolds number in simulations is 4.0 × 104 < Re < 1.2 × 105. The two-dimensional unsteady Reynolds-Averaged Navier-Stokes (RANS) equations and Shear Stress Transport (SST) k-ω turbulence model are used to calculate the flow around marine riser. The Newmark-β method is employed for evaluating the structure dynamics of marine riser. The effect of the height ratio (ε) of TGS on VIV suppression is evaluated. The amplitude responses, frequency responses, vortex patterns and the flow around the structures are discussed in detail. With the increase of the height ratio of TGS, the suppression effect of TGS on VIV suppression is improved firstly and then weakened. When ε=0.04, the suppression effect of TGS is the best. Compared with the VIV responses of smooth marine riser, the amplitude ratio is reduced by 38.9%, the peak of the lift coefficient is reduced by 69% and the peak of the drag coefficient is reduced by 40% when Re=6.0 × 104. With the increase of Reynolds number, the suppression effect of TGS on VIV suppression is improved firstly and then weakened. When the Reynolds number is 7.0 × 104, the amplitude ratio can be reduced by 40.1%. As to the large-amplitude vibration cases, the TGS show nice suppression effect on VIV.

파랑-지반-해안구조물의 상호작용에 기인하는 해저지반과 구조물의 동적응답에 관한 수치시뮬레이션 (Numerical Simulation on Seabed-Structure Dynamic Responses due to the Interaction between Waves, Seabed and Coastal Structure)

  • 이광호;백동진;김도삼;김태형;배기성
    • 한국해안·해양공학회논문집
    • /
    • 제26권1호
    • /
    • pp.49-64
    • /
    • 2014
  • 해안 및 해양구조물 하부의 해저지반에 고파랑이 장시간 작용하는 경우 과잉간극수압(진동과잉간극수압과 잔류과잉간극수압의 합)이 크게 발생할 수 있고, 이어지는 유효응력의 감소에 따라 해저지반에 액상화가 발생될 수 있다. 일단, 지반액상화가 발생 및 진행되면 구조물의 침하 혹은 전도에 의해 종국적으로 구조물이 파괴될 가능성이 높아진다. 특히, 중력식구조물이 설치된 하부지반내에서는 파작용에 의한 큰 과잉간극수압과 작은 유효응력으로 부터 발생되는 지반액상화의 여부를 정확히 예측할 필요가 있고, 이러한 지반의 동적거동 특성은 설계에 충분히 반영되어야 한다. 본 연구에서는 2차원수치파동수로를 불규칙파동장으로 확장한 수치해석법을 적용하여 해저지반상 및 구조물의 표면상에서 시간변동의 동파압과 유속에 의한 전단응력을 산정하고, 그 결과를 지반의 동적거동을 정밀하게 재현할 수 있는 해저지반응답용의 수치해석프로그램 FLIP(Finite element analysis LIquefaction Program)에 입력치로 적용하여 해저지반내에서 과잉간극수압 및 유효응력의 시공간적인 변화, 이로 인한 액상화, 그리고 지반의 시간변형과 구조물의 시간변위를 정량적으로 평가한다. 이로부터 해저면상에서 전단응력을 고려한 경우 구조물 전면의 하부해저지반에서 액상화 가능성을 확인할 수 있었고, 액상화된 토립자는 흐름에 저항력을 상실하므로 세굴로 이어질 것으로 판단된다. 따라서, 태풍시 고파랑의 작용이 장시간 지속되는 경우 구조물의 전면에서는 지반액상화로 인한 지반강도의 현저한 저하로 구조물의 진동변위가 더욱 크게 발생되고, 더불어 구조물의 안정성에 영향을 미칠 것으로 예상된다.

Aero-elastic wind tunnel test of a high lighting pole

  • Luo, Yaozhi;Wang, Yucheng;Xie, Jiming;Yang, Chao;Zheng, Yanfeng
    • Wind and Structures
    • /
    • 제25권1호
    • /
    • pp.1-24
    • /
    • 2017
  • This paper presents a 1:25 multi-freedom aero-elastic model for a high lighting pole at the Zhoushan stadium. To validate the similarity characteristics of the model, a free vibration test was performed before the formal test. Beat phenomenon was found and eliminated by synthesis of vibration in the X and Y directions, and the damping ratio of the model was identified by the free decay method. The dynamic characteristics of the model were examined and compared with the real structure; the similarity results were favorable. From the test results, the major along-wind dynamic response was the first vibration component. The along-wind wind vibration coefficient was calculated by the China code and Eurocode. When the peak factor equaled 3.5, the coefficient calculated by the China code was close to the experimental result while Eurocode had a slight overestimation of the coefficient. The wind vibration coefficient during typhoon flow was analyzed, and a magnification factor was suggested in typhoon-prone areas. By analyzing the power spectrum of the dynamic cross-wind base shear force, it was found that a second-order vortex-excited resonance existed. The cross-wind response in the test was smaller than Eurocode estimation. The aerodynamic damping ratio was calculated by random decrement technique and the results showed that aerodynamic damping ratios were mostly positive at the design wind speed, which means that the wind-induced galloping phenomenon is predicted not to occur at design wind speeds.

체결력을 고려한 콘크리트 삽입 앵커볼트의 간편 유한요소 모델 (Simplified Finite Element Model of an Anchor Bolt Inserted Through Concretes Considering Clamping Forces)

  • 노명현;이상열;박규식
    • 한국전산구조공학회논문집
    • /
    • 제26권4호
    • /
    • pp.293-300
    • /
    • 2013
  • 본 논문에서는 앵커볼트의 체결력을 고려한 유한요소 모델을 제안함으로써 앵커볼트로 연결된 부재의 해석적 평가방법을 제안하였다. LS-DYNA를 사용한 유한요소 모델링은 복잡한 3차원 상세모델보다는 단순화된 앵커모델들을 적용함으로써 해석 효율성을 고려하였다. 앵커볼트는 Beam 혹은 Solid 요소로 토크 조임에 따른 앵커볼트 긴장상태를 반영하였고, 토크 조임에 따른 체결력을 고려하기 위해 너트면에 압축력을 도입하거나 너트를 Shell 혹은 Solid로 고려하여 작용 토크값으로 산정되는 체결력과 등가의 하중을 도입하였다. 외력 작용 시 체결력과 마찰력에 의한 앵커볼트의 하중전달은 nodal rigid 혹은 contact 조건으로 고려하였다. 체결력을 고려한 세 종류의 앵커모델을 적용한 해석결과, Model I과 Model III는 볼트 축력과 전단력이 매우 유사한 값으로 계산되었고, Model II의 경우, 볼트 축력과 전단력이 다소 과소평가되는 것으로 나타났다. Model I은 다른 두 모델에 비해 수치해석적으로 효율적인 것으로 분석되었다.

Strength degradation of a natural thin-bedded rock mass subjected to water immersion and its impact on tunnel stability

  • Zhang, Yuting;Ding, Xiuli;Huang, Shuling;Wu, Yongjin;He, Jun
    • Geomechanics and Engineering
    • /
    • 제21권1호
    • /
    • pp.63-71
    • /
    • 2020
  • Strength anisotropy is a typical feature of thin-bedded rock masses and their strength will be degraded subjected to water immersion effect. Such effect is crucial for the operation of hydropower plant because the impoundment lifts the water level of upstream reservoir and causes the rock mass of nearby slopes saturated. So far, researches regarding mechanical property of natural thin-bedded rock masses and their strength variation under water immersion based on field test method are rarely reported. This paper focuses on a thin-bedded stratified rock mass and carries out field test to investigate the mechanical property and strength variation characteristics. The field test is highlighted by samples which have a large shear dimension of 0.5 m*0.5 m, representing a more realistic in-situ situation than small size specimen. The test results confirm the anisotropic nature of the concerned rock mass, whose shear strength of host rocks is significantly larger than that of bedding planes. Further, the comparison of shear strength parameters of the thin-bedded rock mass under natural and saturated conditions show that for both host rocks and bedding planes, the decreasing extent of cohesion values are larger than friction values. The quantitative results are then adopted to analyze the influence of reservoir impoundment of a hydropower plant on the surrounding rock mass stability of diversion tunnels which are located in the nearby slope bank. It is evaluated that after reservoir impoundment, the strength degradation induced incremental deformations of surrounding rock mass of diversion tunnels are small and the stresses in lining structure are acceptable. It is therefore concluded that the influences of impoundment are small and the stability of diversion tunnels can be still achieved. The finings regarding field test method and its results, as well as the numerical evaluation conclusions are hoped to provide references for rock projects with similar concerns.

입자기반 개별요소모델을 통한 결정질 암석 내 균열의 역학적 거동 모델링: 국제공동연구 DECOVALEX-2023 Task G(Benchmark Simulation) (Grain-Based Distinct Element Modelling of the Mechanical Behavior of a Single Fracture Embedded in Rock: DECOVALEX-2023 Task G (Benchmark Simulation))

  • 박정욱;박찬희;윤정석;이창수
    • 터널과지하공간
    • /
    • 제30권6호
    • /
    • pp.573-590
    • /
    • 2020
  • 본 논문에서는 국제공동연구인 DECOVALEX-2023 프로젝트 Task G의 연구 현황과 현재까지 수행된 benchmark 해석 결과를 소개하였다. Task G의 명칭은 'Safety ImplicAtions of Fluid Flow, Shear, Thermal and Reaction Processes within Crystalline Rock Fracture NETworks(SAFENET)'로, 결정질 암반 내 균열의 생성과 성장 메커니즘 및 균열에서 발생하는 열-수리-역학적 복합거동을 해석하기 위한 수치해석기법을 개발하는 데에 목표가 있다. Task G의 첫 번째 연구 테마는 결정질 암석 내 단일 균열의 역학적 거동에 대한 해석해(analytical solution)를 바탕으로 각 연구팀의 수치모델링기법을 개발 및 검증하는 Benchmark 해석이다. 본 연구에서는 3차원 입자기반 개별요소모델을 이용하여 단일 균열을 포함한 암석의 역학적 거동 특성을 모델링하고자 하였다. 이 모델에서는 상호독립적으로 거동하는 개별입자의 집합체를 통해 암석의 구조적 특징을 모사하고, 입자와 입자간 접촉에서 발생하는 역학적 거동을 개별요소해석모델인 3DEC을 통해 계산하게 된다. 해석 결과, 도메인의 경계응력으로 인해 균열에 유도되는 수직응력과 전단응력 수준은 변위 구속과 응력 재배치로 인해 이론적인 수치보다 낮게 나타났다. 그러나 수치모델에서 계산된 수직변위와 전단변위는 실제 균열의 유도 응력을 통해 추정된 해석해와 비교할 때 상당히 유사한 결과를 보였으며 균열의 응력-변위 관계를 합리적으로 재현할 수 있음을 확인하였다. 본 연구의 해석모델은 Task G에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 다양한 조건의 실내시험에 적용하여 타당성을 검증할 예정이다.

지하구조물 변위거동에 따른 콘크리트궤도의 손상영향 분석 (Evaluation on Damage Effect of Concrete Track induced by Underground Structure Displacement Behavior)

  • 최정열
    • 문화기술의 융합
    • /
    • 제10권3호
    • /
    • pp.839-844
    • /
    • 2024
  • 본 연구는 인접굴착공사, 지반열화 및 지하수위의 변화에 따른 지하구조물 변위거동이 궤도 손상에 미치는 영향을 해석적으로 분석하였다. 연구대상인 콘크리트궤도는 침목플로팅궤도(STEDEF)와 사전제작형궤도(B2S)를 대상으로 분석하였다. 침목플로팅궤도는 콘크리트 도상과 침목이 분리된 궤도구조이다. 사전제작형궤도는 프리캐스트 슬래브를 이용하여 레일 및 체결장치를 조립하여 레일의 탄성거동을 유도하는 궤도구조이다. 수치해석을 위해 콘크리트 궤도별로 레일부터 콘크리트 도상까지 모두 3차원 요소로 모델링하였다. 또한 지하구조물 변위거동을 변수로 설정하여 콘크리트 도상의 손상영향을 분석하였다. 수치해석을 이용하여 융기 및 침하에 따른 콘크리트 도상 응력을 분석하였으며, 인장강도 및 전단강도와 비교하여 균열 발생 수준을 분석하였다. 분석결과, 동일한 융기 및 침하발생 시 사전제작형궤도보다 침목플로팅궤도가 취약한 것으로 분석되었다. 또한 최대 융기 및 침하부 기준으로 침목플로팅궤도의 균열발생 영향범위가 큰 것으로 분석되었다.

내진 설계시 지반계수의 합리적 적용에 대한 연구 (Application of Soil Factor on the Aseismic Design)

  • 이인모;임종석
    • 한국지반공학회지:지반
    • /
    • 제9권1호
    • /
    • pp.7-20
    • /
    • 1993
  • 1988년 건설부에서 제정한 건축물에 대한 재진설계규준'에는 저면 전단력 산정시 지반계수가 1.0, 1.2, 1.5로 구분되어 있는데, 특히 얕은지반의 연약층에서 지반계수의 선정이 모호할 때가 많다. 또한 우리나라의 지반특성은 대부분 퐁화암 및 연암층이 20m이내에서 발견됨을 고려하여, 일차원 파전파 이론과 반무한 탄성이론 및 문헌을 통한 분석을 통해 지진 하중시 지반의 조건이 저면 전단력에 미치는 증폭효과를 비교분석하여 내진 설계시 적절한 지반계수 선택을 할 수 있도록 하였다.

  • PDF

프란시스 수차 모델의 러너 간극에 따른 내부유동 및 성능 특성 (Internal Flow and Performance Characteristics According to the Runner Gap of a Francis Turbine Model)

  • 김승준;최영석;조용;최종웅;현정재;주원구;김진혁
    • 한국수소및신에너지학회논문집
    • /
    • 제31권3호
    • /
    • pp.328-336
    • /
    • 2020
  • In the Francis turbine, the leakage flow through the runner gaps which are between the runner and the stator structure influences the internal flow and hydraulic performance. Thus, the investigation for the flow characteristics induced by the runner gaps is important. However, the runner gaps are often disregarded by considering the time and cost of the numerical analysis. Therefore, in this study, the flow characteristics according to runner gaps of the Francis turbine model were investigated including the leakage flow of the runner cone. The three-dimensional unsteady Reynolds-averaged Navier-Stokes analyses were conducted using a scale-adaptive simulation shear stress transport as a turbulence model for observing the influence of the leakage flow on the internal flow and hydraulic performance. The efficiencies were decreased slightly with runner gaps; and the complicated flows were captured in the gaps.

Low velocity impact response and dynamic stresses of thick high order laminated composite truncated sandwich conical shell based on a new TDOF spring-mass-damper model considering structural damping

  • Azizi, A.;Khalili, S.M.R.;Fard, K. Malekzadeh
    • Steel and Composite Structures
    • /
    • 제26권6호
    • /
    • pp.771-791
    • /
    • 2018
  • This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.