• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.585-591
• /
• 2019

Objective: This study investigated carcass characteristics and meat quality of purebred Pakchong 5, crossbred pigs sired by Pakchong 5, and crossbred pigs sired by Duroc. Methods: Forty-eight pigs (average body weight of 22.25 kg) were composed of three groups as purebred Pakchong 5 (PP), Large $White{\times}Landrace$ pigs sired by Pakchong 5 (LWLRP), and Large $White{\times}Landrace$ pigs sired by Duroc (LWLRD). Each group consisted of eight gilts and eight barrows. At 109-day-raising period, pigs were slaughtered, and carcass characteristics were evaluated. Longissimus thoracis (LT) muscles from left side of carcasses were evaluated for meat quality and chemical composition. Data were analyzed using general linear model procedure, where group, sex, and their interaction were included in the model. Results: The PP had greater carcass, total lean, and ham percentages than crossbred pigs (p<0.05). LWLRP had thicker backfat and more carcass fat percentage than LWLRD (p<0.05). There were no differences (p>0.05) on cutting percentages from tender loin, loin, boston butt, and picnic shoulder among groups. The PP and LWLRP had larger loin eye area (LEA) than LWLRD (p<0.05). Gilts had more loin percentage and lower $L^*$ value than barrows (p<0.05). No meat color parameters ($L^*$, $a^*$, and $b^*$) were affected by groups (p>0.05). PP and LWLRP had larger muscle fiber diameters than LWLRD (p<0.05). However, water holding capacity, Warner-Bratzler shear force values, and chemical composition of LT were not affected by group or sex (p>0.05). Conclusion: Pakchong 5 purebred has good carcass and lean percentages. Compared to Duroc crossbred pigs, Pakchong 5 crossbreds have similar carcass and lean percentages, larger LEA, and slightly more carcass fat, with comparable meat quality and chemical composition. Pakchong 5 boars are more affordable for very small- to medium-scale pig producers.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.201-207
• /
• 2019

In this study, the direct tensile properties of amorphous metallic fiber-reinforced cement based composites according to the strain was evaluated. A thin plate-shape amorphous metallic fiber with 15mm and 30mm in length was used. And fiber-reinforced cement based composites were prepared with contents of 1.0, 1.5, 2.0%. The direct tensile test was conducted under the conditions of $10^{-6}/s(static)$ and $10^1/s(dynamic)$ strain rate. As a results, amorphous metallic fiber with a length of 15mm was observed in pull-out behavior from the cement matrix because of the short fiber length and large portion of mixed fiber. On the other hand, amorphous metallic fiber with a length of 30mm were not pulled out from matrix because the bonding force between the fiber and matrix was large due to rough surface and large specific surface area. However, fracture occurred because thin plate shape fibers were vulnerable to shear force. Tensile strength, strain capacity and toughness were improved due to the increase in the fiber length. The dynamic increase factor of L15 was larger that of L30 because the bonding performance of the fiber-matrix interface is significantly affected by the strain rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.711-720
• /
• 2019

Objective: This study was conducted to assess the effect of potassium humate and enzymes (Xylanase+Amylase+Protease) inclusion in diets on carcass characteristics, meat quality and fatty acid profiles of broilers fed canola-based diets. Methods: Two hundred and twenty broilers randomly allotted to 5 dietary treatments: the control (commercial broiler diet); CM (17.5% canola meal inclusion); CMEnz (17.5% CM inclusion+0.3 g/kg Axtra XAP); CMPh (17.5% CM inclusion+1.5% Potassium Humate, PH); and CMEnzPh (17.5% CM inclusion+1.5% PH+0.3 g/kg Axtra XAP) were slaughtered at day 42 for assessment of carcass and meat quality parameters. Results: Diet had no effect on carcass traits apart from breast muscle weight and breast muscle index. The highest breast muscle weight was observed in broilers fed CMEnz ($487.6{\pm}17.5g$) followed by those fed the control diet ($474.37{\pm}17.5g$). Diet also had no significant dietary effect on pH, temperature, drip loss and shear force values of the breast muscle. However, diet significantly affected meat colour and water-holding capacity. Broilers in the control and CMPh groups ($52.94{\pm}0.67$ and $52.91{\pm}0.67$) had the highest (p<0.05) values for lightness ($L^*$), whilst those fed CMEnzPh had the lowest value ($47.94{\pm}0.67$). In contrast, CM group had the lowest (p<0.05) value for redness ($a^*$) with CMEnzPh group having the highest values. The proportion of polyunsaturated fatty acids (PUFAs), n-6 and n-3 fatty acids and the PUFA/saturated fatty acid ratio were increased in CM-based diets containing enzymes and humic acid. Conclusion: It can, therefore, be concluded that CM can be included in broiler diets in the presence of enzymes and humic acid with positive effects on meat quality and important fatty acids that are beneficial to the health of consumers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.267-274
• /
• 2021

Among several methods for determining the allowable lateral resistances of piles, the subgrade reaction method and ultimate lateral resistance method are generally used. To determine the effects of the soil conditions, pile head restraint conditions, and pile lengths on determining the allowable lateral resistances of piles, computations of the allowable lateral resistances of piles using the two methods were executed, and the computation results were compared. For piles in soft cohesive soil, the pile design is governed by the allowable lateral resistance of a pile from subgrade soil reaction method regardless of the pile head restraints conditions and pile lengths. The allowable lateral resistance of a pile from the ultimate lateral resistance governs the design as the undrained shear strength increases. Except for the case of a short pile, which is installed in loose granular soil, the allowable lateral resistance of a pile from ultimate lateral resistance governs the design of laterally loaded piles. According to this study, computation of the ultimate lateral resistance of a pile is needed, even though some opinions suggest that the design of a laterally loaded pile is satisfied only by the subgrade reaction method. The pile width barely influences the coefficient of horizontal subgrade reaction. Realistically, the effect of the pile width can be disregarded in the condition of common pile widths of 20~90cm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2021

In order to reuse existing onshore turbine foundations, it is important to redesign and reinforce the existing foundations according to the upgraded tower diameter and turbine load. In the present study, a slab extension reinforcement method and structure details of an anchorage part were examined in consideration of the reuse of spread footings, which are the most widely used foundation type in onshore wind turbine foundations. Experiments were conducted to evaluate the load resistance performance of a reinforced spread footing according to structure details of an anchorage part. The results showed that (1) the strength of an anchorage part could be increased by more than 30 % by adding reinforcement bars in the anchorage part, (2) pile-sleeves attached to an anchor ring contributed to an increase in rotational stiffness by preventing shear slip behavior between the anchor ring and the concrete, and (3) slab connectors contributed to an increase in the strength and deformation capacity by preventing the separation of new and old concrete slabs.

• Food Science of Animal Resources
• /
• v.41 no.5
• /
• pp.802-815
• /
• 2021

To investigate the effect of postmortem phases on lamb meat quality, the physicochemical quality, microstructure and water mobility of oyster cut, short loin, knuckle and silverside muscles from Small-Tail Han sheep were evaluated in the pre-rigor, rigor mortis and post-rigor phases. Pre-rigor lamb meat had higher pH and water holding capacity (WHC), whereas lower CIE L^*, b^*, hue angle values than rigor mortis and post-rigor meat (p<0.05). The Warner-Bratzler shear force (WBSF) values were higher in rigor mortis short loin and silverside than their pre-rigor and post-rigor counterparts, pre-rigor short loin had lower WBSF value than its post-rigor counterpart (p<0.05). Muscle fibers shrank laterally and longitudinally during the onset of rigor mortis. Rigor mortis and postrigor lamb meat exhibited wide I-bands, dark A-bands, short sarcomeres and large inter-myofibrillar spaces. The shift of immobilized water to free water and repulsion from the intra-myofibrillar space to the extracellular space result in the increase of water loss in rigor mortis and post-rigor lamb meat. The results of the principal component analysis (PCA) indicated that rigor mortis and post-rigor lamb meat had similar quality properties but different from pre-rigor lamb meat. In conclusion, the lamb meat in the pre-rigor phase had good tenderness, color and WHC. The results of this research could provide some theoretical references for lamb meat production and processing.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.1069-1079
• /
• 2022

Objective: The objective of this study was to investigate the effect of 4-month intensive feeding on the meat quality, fatty acid profile, flavor, and growth performance of grazing Hulunbuir sheep (HBS). Methods: The HBS were selected 4-months after birth in a pasture rearing system as the experimental animals (n = 44, female, average body weight 23.8±2.2 kg) then divided equally into pasture-based grazing fattening (PAS) and concentrate-included intensive fattening (CON) groups for another 4-month finishing. When finished fattening, all animals were slaughtered to collect musculus longissimus dorsi subcutaneous adipose tissue and to investigate the influences on meat quality, fatty acid profile, flavor and growth performance. Results: The results showed lambs in CON group got significantly higher live weight, hot carcass weight, and dressing percentage. The CON group had significantly higher value of redness (a^*), lightness (L^*) and water holding capacity (p<0.05), significantly lower value of Warner-Bratzler shear force than the PAS group (p<0.05). The subcutaneous fat from CON group lambs demonstrated a significantly higher content of C18:1 and C18:2 (p<0.05), but lower C14:0 and C16:0, indicating an increased degree of unsaturated fatty acid. The content of 4-methyloctanoic acid, 4-ethyloctanoic acid and 4-methylnonanoic acid had increased 2 to 4 times, representing a more intense odor in the CON group. However, the values were still lower than most sheep breeds reported, indicating the indoor feeding system could not fundamentally deteriorate the excellent meat characteristic of HBS. Conclusion: It was evident that lambs in CON group exhibited a better meat production performance, improved in meat color, texture and healthier fatty acid profile through pasture-weaned concentrate included intensive fattening system, which offers a good alternative regimen for lamb finishing and has a wide prospection in the HBS meat industry.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.73-81
• /
• 2022

Recently, as the service life of structures increased, the load-carrying capacity of deteriorated reinforced concrete, where corrosion of reinforcing bars occurs due to various causes, is frequently decreased. In order to address this problem, many studies on the bond characteristic of FRP (Fiber Reinforced Polymer) bars with corrosion resistance, light weight and high tensile strength have been conducted, however there are not many studies on the bond characteristic of grid-typed CFRP embedded in concrete. Therefore, in order to evaluate the bond characteristics of grid-typed CFRP and its usability as a substitute for steel rebar, a pull-out test is performed using the longitudinal bond length and transverse grid length of the grid-typed CFRP as variables. Through the pull-out test, the bond load-slip curve of the grid-typed CFRP is derived, and the bond behavior is analyzed. The total bond load equation is proposed as the sum of the bond force of the longitudinal bond length and the shear force of the grid in the transverse direction. Also, expressing the area of the bond load-slip curve as total work, the change in dissipated energy with respect to the slip is analyzed to examine the effect of the tranverse grid on the bond force.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.4
• /
• pp.165-171
• /
• 2019

The objective of this study was to investigate the effects of gender on meat quality traits and sensory characteristics of pork loin. A total of 90 pork carcasses (180 days old, 45 barrows and 45 gilts, each gender group was consisted of fifteen 1+, 1 and 2 carcass grades) were selected and loin cuts were excised to investigate meat quality, electronic tongue measures and sensory panel test. There were significant differences in drip loss (1.66% vs 1.21%), released water (12.19% vs 10.68%) and cooking loss (23.67% vs 21.04%) between loins from barrow and gilt (p<0.05). However, no significant differences in meat color (CIE L^* a^* b^*) and shear force were observed between gender groups (p>0.05). Umami and richness values of barrow were significantly higher than those of gilt, while barrow had significantly lower sourness value compared to gilt(p<0.05). On the sensory evaluation, barrow scored higher in flavor, juiciness and tenderness both, and as a result, barrow (5.51 points) also scored significantly higher than gilt (4.86 points). These results suggest that the umami intensity and sensory taste of barrow loin are superior to gilt loin due to its high water-holding capacity.

• Journal of Animal Science and Technology
• /
• v.66 no.4
• /
• pp.792-806
• /
• 2024

This study aimed to confirm the applicability of the new nitrogen (N₂) gas stunning method in the broiler slaughtering process by comparing the meat and small intestine quality following different stunning methods (electrical, carbon dioxide (CO₂), N₂, and halal). Four treatments were compared: (i) electrical stunning (Elec), (ii) 80% CO₂ gas stunning (CO₂-gas), (iii) 98% N₂ gas stunning (N₂-gas), and (iv) the non-stunning method (halal). N₂ gas stunning (98%) and the halal method were conducted at the pilot plant abattoir of the national institute of animal science, Korea, and electrical and 80% CO₂ stunning were performed on the nearest commercial slaughter house. Meat pH_24h, color (lightness, redness and yellowness), proximate composition, water holding capacity (WHC), cooking loss, and Warner-Bratzler shear force (WBSF) were measured, and in the small intestine, pH_24h, color, thickness, and WBSF were measured. The Elec treatment showed high lightness, yellowness, and low redness in both meat and the small intestine, indicated by a pale color; the CO₂-gas treatment showed high redness, low lightness, and low yellowness, and the coloration of meat from the N₂-gas treatment was intermediate between Elec and CO₂-gas. For other quality traits, the N₂-gas showed good results and was between Elec and CO₂-gas. Additionally, severe stress (low pH in both meats), low WHC in meat, and cracked small intestine with numerous apertures were observed in the CO₂-gas, and pale colored hemorrhagic breast meat was found in the Elec. Therefore, in view of animal welfare and quality traits of meat and the small intestine, 98% N₂ gas can be considered in broiler stunning.