• Title/Summary/Keyword: shapes area

Search Result 776, Processing Time 0.031 seconds

Buckling Loads of Column with Constant Surface Area (일정표면적 기둥의 좌굴하중)

  • Lee, Byoung Koo;Park, Kwang Kyou;Lee, Tae Eun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.1A
    • /
    • pp.1-7
    • /
    • 2011
  • This paper deals with buckling loads of the column with the constant surface area. The shape function of variable column depth is chosen as the linear taper. The ordinary differential equation governing buckled shapes of the column is derived based on the dynamic equilibrium equation of such column subjected to an axial load. Three kinds of end constraint of hinged-hinged, hinged-clamped and clamped-clamped are considered in numerical examples. Effects of the column parameters on buckling loads are extensively discussed. Especially, section ratios of the strongest column are calculated, under which the maximum, i.e. strongest, buckling loads are achieved. Also the buckled shapes are obtained for searching the nodal points where the inner transverse supports are simply installed to increase the buckling loads.

Effects of Particle Shapes on Unipolar Diffusion Charging of Non-Spherical Particles (비구형 입자의 형상에 따른 단극 확산 하전 특성)

  • Oh, Hyun-Cheol;Park, Hyung-Ho;Kim, Sang-Ho
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.28 no.5
    • /
    • pp.501-509
    • /
    • 2004
  • Unipolar diffusion charging of non-spherical particles was investigated for various particle shapes. We researched with TiO$_2$agglomerates produced by the thermal decomposition of titanium tetraisopropoxide (TTIP) vapor. TTIP was converted into TiO$_2$, in the furnace reactor and was subsequently introduced into the sintering furnace. Increasing the temperature in the sintering furnace, aggregates were restructured into higher fractal dimensions. The aggregates were classified according to their mobility using a differential mobility analyzer. The projection area and the mass fractal dimension of particles were measured with an image processing technique performed by using transmission electron microscope (TEM) photograph. The selected aggregates were charged by the indirect photoelectric-charger and the average number of charges per particle was measured by an aerosol electrometer and a condensation particle counter. For the particles of same mobility diameter, our results showed that the particle charge quantity decreases as the sintering temperature increases. This result is understandable because particles with lower fractal dimension have larger capacitance and geometric surface area.

Anlaysis of Design flood in a relation to Changing Characteristics of Area by using HEC-1 Model (HEC-1 모형의 유역특성변화에 따른 설계 홍수량의 비교 분석)

  • 김선주;김필식
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 1999.10c
    • /
    • pp.537-543
    • /
    • 1999
  • While there are to estimating design discharge , we are in trouble with how to separate area, Because discharges will be different depending on the shape of area even though there are same size of area . This study is for a reasonable presentation of design discharge method where there are changing characteristcs of area with SCS and Clark theory by sung HEC-1 Model. While we were Estimating desgin discharge with separating area in a relation to Time of Concentration(Tc) with SCS , Clark method, we found that if there are no variation of Tc the value of a discharge is not changed where shapes of area are different though. And from the result of analysis with SCS and Clark method, we ascertained that discharge by the SCS method was more bigger than that of the Clark where Area is less than 100ha. On the other hand, Clark method is more bigger in the more 1000ha.

  • PDF

A Study on Electron Beam Weldmetal Cross Section Shapes and Strength of Al 5052 Thick Plate (Al 5052 함금 후판재의 전자빔 용접부 단면 형상과 강도에 관한 연구)

  • Kim, In-Ho;Lee, Gil-Young;Ju, Jeong-Min;Park, Kyoung-Tae;Chun, Byong-Sun
    • Journal of Welding and Joining
    • /
    • v.27 no.3
    • /
    • pp.73-79
    • /
    • 2009
  • This present paper investigated the mechanical properties and the microstructures of each penetration shapes classifying the conduction shape area and the keyhole shape area about electron beam welded 120(T)mm thick plated aluminum 5052 112H. As a result the penetration depth is increased linearly according to the output power, but the aspect ratio is decreased after the regular output power. In the conduction shape area, the Heat affected zone is observed relatively wider than the keyhole shape area. In the material front surface of the welded specimen, the width is decreased but the width in the material rear surface is increased. After the measuring the Micro Vikers Hardness, it showed almost similar hardness range in all parts, and after testing the tensile strength, the ultimate tensile strength is similar to the ultimate tensile strength of the base material in all the specimens, also the fracture point was generated in the base materials of all the samples. In the result of the impact test, impact absorbed energy of the Keyhole shape area is turned up very high, and also shown up the effect about four times of fracture toughness comparing the base material. In the last result of observing the fractographs, typical ductile fraction is shown in each weld metal, and in the basic material, the dimple fraction is shown. The weld metals are shown that there are no other developments of any new chemical compound during the fastness melting and solidification.

Traffic Sign Area Detection by using Color Rate and Distance Rate (컬러비와 거리비를 이용한 교통표지판 영역추출)

  • Kwak, Hyun-Wook;Lee, Woo-Beom;Kim, Wook-Hyun
    • The KIPS Transactions:PartB
    • /
    • v.9B no.5
    • /
    • pp.681-688
    • /
    • 2002
  • This paper proposes a system detecting the area of traffic sign, which uses color rate as the information of colors, and corner point and distance rate as the information of morphology. In this system, a candidate area is extracted by performing dilation operation on the binary image made by the color rate of R, G, B components and by detecting corner point and center point through mask. The area of traffic sign with varied shapes is extracted by calculating the distance rate from center point, which is the information of morphology. The results of this experiment demonstrate that in this system which is invariable regardless of its size and location, it is possible to extract the exact area from varied traffic signs such as the shapes of triangle, circle, inverse triangle, and square as well as from the images at both day and night when brightness value is greatly different. Moreover, it demonstrates great accuracy and speed in processing.

Shape Recognition of 3-D Protein Molecules Using Feature and Pocket Points (포켓과 특징 점을 이용한 3차원 단백질 분자 형상인식)

  • Lee, Hang-Chan
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.11 no.3
    • /
    • pp.75-81
    • /
    • 2011
  • Protein molecules are combined with another ones which have similar shapes at pocket positions. The pocket positions can be good references to describe the shapes of protein molecules. Harris corner detector is commonly used to detect feature points of 2 or 3D objects. Feature points can be found on the pocket areas and the points which have high derivatives. Generally speaking, the densities of feature points are relatively high at pocket areas because the shapes of pockets are concave. The pocket areas can be decided by the subdivision of voxel cubes which include feature points. The Euclidean distances between feature points and the central coordinate of the decided pocket area are calculated and sorted. The graph of sorted distances describes the shape of a protein molecule and the distribution of feature points. Therefore, it can be used to classify protein molecules by their shapes. Even though the shapes of protein molecules have been distorted with noises, they can be recognized with the accuracy more than 95 %. The accurate shape recognition provides the information to predict the binding properties of protein molecules.

UBET Analysis of Combined Forging of Non-Axisymmetric Shapes With Inclined Protrusion (경사진 돌출부가 있는 비축대칭 복합단조의 상계요소해석)

  • 윤정호;양동열
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.1
    • /
    • pp.1-12
    • /
    • 1990
  • The study is concerned with the analysis of combined forging of non-axisymmetric shapes with inclined protrusions by UBET technique. Work hardening is considered for the given range of strain rate during the forging process. A complex shape with inclined cavities is analyzed by subdividing the workpiece into finite UBET elements for which simple velocity fields are applicable. An experimental set-up was designed and manufactured for the experiment, and experiments are carried out with lead billets. The devised set-up can be used for closed-die forging of complex shapes with protrusions in which the dies can be separated automatically for easy removal of the forged products. Based on the derived kinematically admissible velocity fields for corresponding UBET elements, general computer programs have been developed. Since the energy dissipation rate for each elemental region is provided by subprograms (Subroutine or Function), the developed program can be applied to the forging problems of various shapes. The present study has shown that the method developed can be effectively applied to forging of non-axisymmetric shapes with complicated protrusions.

Analysis of Breast Shapes through the Utilization of 3D Scan Data: A Focus on Women in the Early to Late 30s (3차원 데이터를 활용한 유방유형별 형태 분석: 30대 여성을 중심으로)

  • Kim, Ji Min;Kim, Hyo Sook
    • Human Ecology Research
    • /
    • v.52 no.5
    • /
    • pp.509-518
    • /
    • 2014
  • This study strives to analyze the characteristics of and changes in breast shapes of women in their 30s, whose bodies start to age and whose breasts experience changes due to internal and external factors such as pregnancy, childbearing, and breast-feeding. The analysis of the indirect breast measurements for each age group (early, mid, and late 30s) demonstrates that the volume of the breasts increases proportionally with age, the breasts lose their firmness, and the nipples start to point downwards rather than to the sides. The breast shapes experience more significant changes vertically than horizontally as the breasts start to sag downwards. The composition factors of the breasts have been classified into five factors: the level of volume in the breasts and the surrounding area, the degree of sagging in the breasts, the position and vertical width of the breasts, the volume of the breasts, and the degree of width between the breasts. The breasts have been categorized into three different shapes. Breast Shape I (32.56%) appeared most frequently among women in their mid 30s, and this shape falls into the category of Sagging I, which is one of the six breast types that have been classified by the Japanese Wacoal Research Center, in addition to Korean size 80A. Breast Shape II (38.76%) appeared most frequently among women in their mid 30s, and this shape has been categorized as flat with its size being 70A. Breast Shape III (28.68%) appeared most frequently among women in their early 30s with a conical shape and size 75A.

Synthesis of vertically aligned silicon nanowires with tunable irregular shapes using nanosphere lithography

  • Gu, Ja-Hun;Lee, Tae-Yun
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2012.05a
    • /
    • pp.88.1-88.1
    • /
    • 2012
  • Silicon nanowires (SiNWs), due to their unusual quantum-confinement effects that lead to superior electrical and optical properties compared to those of the bulk silicon, have been widely researched as a potential building block in a variety of novel electronic devices. The conventional means for the synthesis of SiNWs has been the vapor-liquid-solid method using chemical vapor deposition; however, this method is time consuming, environmentally unfriendly, and do not support vertical growth. As an alternate, the electroless etching method has been proposed, which uses metal catalysts contained in aqueous hydrofluoric acids (HF) for vertically etching the bulk silicon substrate. This new method can support large-area growth in a short time, and vertically aligned SiNWs with high aspect ratio can be readily synthesized with excellent reproducibility. Nonetheless, there still are rooms for improvement such as the poor surface characteristics that lead to degradation in electrical performance, and non-uniformity of the diameter and shapes of the synthesized SiNWs. Here, we report a facile method of SiNWs synthesis having uniform sizes, diameters, and shapes, which may be other than just cylindrical shapes using a modified nanosphere lithography technique. The diameters of the polystyrene nanospheres can be adjustable through varying the time of O2 plasma treatment, which serve as a mask template for metal deposition on a silicon substrate. After the removal of the nanospheres, SiNWs having the exact same shape as the mask are synthesized using wet etching technique in a solution of HF, hydrogen peroxide, and deionized water. Different electrical and optical characteristics were obtained according to the shapes and sizes of the SiNWs, which implies that they can serve specific purposes according to their types.

  • PDF

Effects of macroporosity and double porosity on noise control of acoustic cavity

  • Sujatha, C.;Kore, Shantanu S.
    • Advances in aircraft and spacecraft science
    • /
    • v.3 no.3
    • /
    • pp.351-366
    • /
    • 2016
  • Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.