• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.273-281
• /
• 2016

In this study, after carrying out a bending test that targeted the frames of plastic film greenhouse, the load-displacement relationship was analyzed to be used as basic data to develop greenhouse construction and maintenance guidelines. As a result, regardless of the shapes of the specimen, the yield and the maximum load increased as the size of the specimen increased. The displacement also showed the same pattern. A steel pipe showed lower yield and maximum load than a square pipe, and the displacement was large. In the steel pipe case, the displacement under the yield and maximum load was in the range of approximately 1.42-4.20mm and 5.80-24.13mm, respectively. In the square pipe case, the displacement under the yield and maximum load was in the range of approximately 1.62-3.00mm and 3.13-8.01mm, respectively. Further, a large difference was observed between the result of this test and the values calculated by a conventionally provided standard. In particular, not much difference was found from the result of this test in the case of a purlin member from the values provided by previous researches. However, a large difference was observed in the column or main rafter members. Furthermore, when a wide-span and venlo type, which is a glasshouse, was used as a target(h/100 and h/80), the displacement under the yield and maximum load was approximately 28.0mm and 35.0mm, respectively, which showed a large difference compared with the Netherlands standard(14.0mm) of a glasshouse. Further, in the main rafter case, a large difference was observed in the displacement limit according to the width(i.e., span) of the greenhouse where members are used. Therefore, because the displacement limit can vary depending on various factors such as type, form, and size of a greenhouse, we determined that studies or tests that consider these factors should be carried out to reflect them in the construction and maintenance of greenhouses.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.21-36
• /
• 2023

As a solution to environmental issues, such as climate change response, the carbon neutrality strategy, urban heat islands, fine dust, and biodiversity enhancement, the value of urban green spaces and trees are becoming important, and various studies dealing with the effects of trees for environmental improvement are being conducted. This study comprehensively considers the preceding studies on planting tree species, planting structure, planting density, and planting base to propose a direction for the planting renewal of green areas in urban parks and applies the findings to a renewal plan to improve the urban environment through landscaping trees. A field survey was conducted on the planting status of Seoul Children's Grand Park, a large-scale neighborhood park in Seoul, and based on the survey data, a planting function evaluation was conducted, and areas needing improvement in planting function were identified. The planting function evaluation was carried out considering the park function setting, planting concept according to spatial function, and planting status. As a result of the study, the direction of planting renewal according to functional change was derived for each stage of planting function evaluation. Increasing the green area ratio is a priority in setting up park functions, but user convenience should also be considered. As a concept of planting, visual landscape planting involves planting species with beautiful tree shapes, high carbon absorption, and fine dust reduction effects. Ecological landscape planting should create a multi-layered planting site on a slope. Buffer planting should be created as multi-layered forests to improve carbon absorption and fine dust reduction effects. Green planting should consist of broad-leaved trees and herbaceous layers and aim for the natural planting of herbaceous species. For plant species, species with high urban environment improvement effects, local native species, and wild bird preferred species should be selected. As for the planting structure, landscape planting sites and green planting sites should be composed of trees, shrubs, and trees and herbaceous layers that emphasize ecology or require multi-layered buffer functions. A higher standard is applied based on the planting interval for planting density. Installing a rainwater recycling facility and using soil loam for the planting base improves performance. The results of this study are meaningful in that they can be applied to derive areas needing functional improvement by performing planting function evaluation when planning planting renewal of aging urban parks and can suggest renewal directions that reflect the paradigm of functional change of created green areas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• Asia Marketing Journal
• /
• v.12 no.2
• /
• pp.53-81
• /
• 2010

Brand experience has received much attention from considerable marketing research. When consumers consume and use brands, they are exposed to various specific brand-related stimuli. These brand-related stimuli include brand identity and brand communications(e.g., colors, shapes, designs, slogans, mascots, brand characters) components. Brakus, Schmitt, and Zarantonello(2009) conceptualized brand experience as subjective and internal consumer responses evoked by brand-related stimuli. They demonstrated that brand experience can be broken down into four dimensions(sensory, affective, intellectual, and behavioral). Because experiences result from stimulations and lead to pleasurable outcomes, we expect consumers to want to repeat theses experiences. That is, brand experiences, stored in consumer memory, should affect brand loyalty. Consumers with positive experiences should be more likely to buy a brand again and less likely to buy an alternative brand(Fournier 1998; Oliver 1997). Brand attachment, one of dimensions of the consumer-brand relationship, is defined as an emotional bond to the specific brand(Thomson, MacInnis, and Park 2005). Brand attachment is target-specific bond between the consumer and the specific brand. Thus, strong attachment is attended by a rich set of schema that link the brand to the consumer. Previous researches propose that brand attachments should affect consumers' commitment to the brand. Brand experience differs from affective construct such as brand attachment. Brand attachment is based on interaction between a consumer and the brand. In contrast, brand experience occurs whenever there is a direct and indirect interaction with the brand. Furthermore, brand experience is not an emotional relationship concept. Brakus et al.(2009) suggest that brand experience may result in brand attachment. This study aims to distinguish brand experience dimensions and investigate the effects of brand experience on brand attachment and brand commitment. We test research problems with data from 265 customers having brand experiences in various product categories by using multiple regression and structural equation model. The empirical results can be summarized as follows. First, the paths from affective, behavior, and intellectual experience to the brand attachment were found to be positively significant whereas the effect of sensory experience to brand attachment was not supported. In the consumer literature, sensory experiences for consumers are often equated with aesthetic pleasure. Over time, these pleasure experiences can affect consumer satisfaction. However, sensory pleasures are not linked to attachment such as consumers' strong emotional bond(i.e., hot affect). These empirical results confirms the results of previous studies. Second, brand attachment including passion and connection influences brand commitment positively but affection does not influence brand commitment. In marketing context, consumers with brand attachment have intention to have a willingness to stay with the relationship. The results also imply that consumers' emotional attachment is characterized by a set of brand experience dimensions and consumers who are emotionally attached to the brand are committed. The findings of this research contribute to develop differences between brand experience and brand attachment and to provide practical implications on the brand experience management. Recently, many brand managers have focused on short-term view. According to this study, we suggest that effective brand experience management requires taking a long-term view of marketing decisions.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.234-252
• /
• 2023

This study looked at the modification of major gardens while making Deoksugung Palace (德壽宮) a park in the Japanese colonial era. This is because landscaping work was carried out in various places from 1932 to 1933 to open Deoksugung Palace, which used to be an imperial palace, as a public recreation space. In particular, major gardens such as the front yard of Seokjojeon Hall (石造殿), the back yard of Hamnyeongjeon Hall (咸寧殿), and the back yard of Jeukjodang Hall (卽阼堂) were greatly transformed into different shapes from the original. During the first phase of construction in 1932, a water tank was installed in Seokjojeon Hall Garden, creating the first water space. This water tank was originally a structure installed in the front yard of Injeongjeon Hall (仁政殿) of Changdeokgung Palace (昌德宮). Around 1909, a water tank installed in the front yard of Injeongjeon Hall was relocated to Seokjojeon Garden in the process of turning Deoksugung Palace into a park. The water tank moved from the front yard of Injeongjeon Hall was a factor that transformed the central area of Seokjojeon Garden into a water space, and a fountain installed to replace the water tank remains to this day. The backyard of Hamnyeongjeon Hall was also renovated into a new shape during the first phase of construction. Originally, there was a terraced flowerbed called Hwagye (花階) in the backyard of Hamyujae Hall (咸有齋) and Hamnyeongjeon Hall, and it was restored from the construction that took place after the Great Fire of Deoksugung Palace. In the process of turning Deoksugung Palace into a park, a three-stage stonework was built in the front yard of Jeonggwanheon Pavilion (靜觀軒) which renovated the Hwagye in the backyard of Hamyujae Hall and Hamnyeongjeon Halll. The stonework built at that time was used as a peony garden to provide visitors with attractions after the opening of Deoksugung Palace, and it remains today with the name Jeonggwanheon's Hwagye. The backyard of the Jeukjodang Hall area is a case of damage in the second phase of construction in 1933. Like the backyard of Hamnyeongjeon Hall, the backyard of Jeukjodang Hall, where the Hwagye was originally built, was converted into a Japanese-style garden in the process of turning Deoksugung Palace into a park. The site where the Hwagye was demolished was decorated with a Japanese-style garden centered on mounding, small roads, and landscaping stones, as well as topographic control and planting work. Although there have been minor changes since liberation, the backyard of the Jeukjodang Hall area is still based on a Japanese-style garden created by turning Deoksugung Palace into a park.

• Journal of the Daesoon Academy of Sciences
• /
• v.46
• /
• pp.69-122
• /
• 2023

This study is an integral exploration of Feng Shui associated with the area around the birthplace of Kang Jeungsan, a sacred site of Daesoon Jinrihoe which holds that the Supreme God descended in human form at that location (through Kang Jeungsan). Through an on-site Feng Shui survey, the main focus of the research method was to explore the Feng Shui configurations around Kang Jeungsan's birthplace especially as it pertains to the connections among geomagnetic veins which lead to the Mount Shiru area. As a method of investigation, this study explored the Feng Shui of Gaekmang-ri Village and the geomantic veins leading up to Mount Shiru. This involved examining the landforms, topography, water flow, and geomantic veins of the area to reveal the overall Feng Shui configurations. Throughout the course of that on-site survey, this study first examined Mount Duseung and Mount Bangjang, also known as Mount Yeongju (sometimes collectively known as Mount Samshin), Mount Dongjuk, Mount Mangje-bong, Mount Maebong, and Mount Shiru. Then, this study stated some of the underlying issues through a scholarly approach based on various theories such as traditional geographical texts and theories on mountain-growth and water-flow from the perspective of Feng Shui. In particular, attention was paid to theoretical aspects of the uninterrupted and undulating flow of the terrain leading to Shiru Mountain. As a result, from a Feng Shui point of view, the connected network geomantic veins in the area of Kang Jeungsan's birthplace and the feng shui features and conditions were all examined through an on-site survey. The survey results revealed that the area forms a large Feng Shui site due to the vast interconnectivity among all the mountains that extend from the Honam vein and form organic relationships with one another. This even includes Mount Samshin in Honam. Considering the geographical conditions that formed a site that enabled harmony between divine beings and humankind, the surrounding place names also provide allusions to the understanding of the birth of Kang Jeungsan as the descent of Supreme God into the human world through the historical figure, Kang Jeungsan. This area is an ideal spot with a propitious spatial arrangement in terms of its Feng Shui. Feng Shui analysis reveals the site to be a place that holds an earth energy-hub transmitting a great energy of nature that cannot be measured by human power alone.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.534-541
• /
• 2009

Word recognition test (WRT) for the children can be useful for diagnosing the degree of communication disability, prescribing hearing instruments, planning aural rehabilitation and speech therapy, and determination of site of lesions. The Korean standard monosyllabic word lists for preschoolers (KS-MWL-P) were developed considering the criteria given by the literatures. However, the authors of KS-MWL-P suggested more children should be included to verify homogeneity of the lists using psychometric function curve since only 8 children participated in the developing process. The purpose of this study was to explore the homogeneity of KS-MWL-P for supplementing the limitations of the lists employing psychometric analysis. To 23 preschoolers who have normal-hearing, 100 monosyllabic KS-MWL-P words were examined with the pictures. Psychometric function curve with linear slopes of 20% and 80%'s correct rates through accounting recognition scores of each monosyllabic word at variable intensities from -10 to 40 dBHL was obtained and analyzed. As a result, s-shaped psychometric function curve was presented with increasing correct rate depending on intensity and showed no statistical significant differences among each word and list. The congruous graph shapes among lists also indicated good homogeneity and the list 1,2,3,4's average slopes were 4.48, 3.86, 4.65, 4.50. It was verified that the homogeneity was suitable because the analysis of variance showed no statistical significance among lists (p>0.05). However, KS-MWL-P's order of slope according to the order of the number of items, $1{\sim}10$, $1{\sim}20$, $1{\sim}25$ showed no difference with the p-value of 0.93, 0.59, 0.91, 0.70 for the lists 1,2,3, and 4, respectively. Although KS-MWL-P was assumed that the lower-numbered items were easy for testing younger ages, this study's results could not agree with the author's conclusion. Considering this matter, rearranging of the number of items should be performed according to the analysis of slope suggested by this study for testing younger children with easier items. Other than this, in conclusion, KS-MWL-P was proved to be useful for clinical and rehabilitative evaluating and training tools for preschoolers.