• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.162-170
• /
• 2001

The purpose of this study was to investigate the effect of cavity configurations on the marginal leakage of class 5 glass ionomer cement and composite resin restorations. Four types of cavities such as saucer shape. notch shape. combined shape(notch shape occlusally and saucer shape gingivally). and U shape were prepared on the buccal and lingual surfaces of 80 extracted premolars(40 cavities for each shape). Occlusal cavity margins were placed at enamel and cervical margins were placed at dentin. 10 cavities of each shape were restored with Ketac Fil as a conventional glass ionomer cement. Fuji II LC improved as a resin modified glass ionomer cement, Z 100 as a hybrid composite resin. and Tetric Flow as a flowable composite resin (40 cavities for each material). After thermocycling, teeth were immersed in 5% basic fuchsin solution for 6 hours and sectioned longitudinally in a buccolingual direction through the center of the restoration. The dye penetrations at the tooth restoration interface were examined by stereomicroscope. The Result were as follows 1. In saucer shape, notch shape and combined shape, composite resin restorations showed lesser leakage than glass ionomer restorations(p<0.05) and in U shape. Tetric Flow showed the least marginal leakage and others were decreased as Z 100. Fuji II LC improved, Ketac Fil in that order. There were statistically significant difference between Tetric Flow and Fuji II LC improved. Ketac Fil and between Z 100 and Ketac Fil(p<0.05). 2. In Ketac Fil restoration group, saucer shape showed the highest marginal leakage and U shape showed the least marginal leakage and others were decreased as notch shape, combined shape in that order. There were statistically significant difference between saucer shape and combined shape, U shape and between notch shape and U shape(p<0.05). 3. In Fuji II LC improved restoration group, U shape showed the least marginal leakage. There were statistically significant difference between U shape and other three shapes(p<0.05). 4. The cavity configuration had no significant effect on marginal leakage of composite resin restorations(p>0.05).

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.131-145
• /
• 2015

Cultural assets restoration is being considered highly as a practical way to extend the lifespan of damaged cultural assets and re-highlight their value. However, restoration process has been mostly dependent on the manual work involving the experience and skill of a person performing restoration, thereby requiring much time and effort. In recent, it became possible to apply a method allowing restoration to be performed more accurately and easily according to the material characteristics and shape of cultural assets. Namely, it is to use a method of printing out the 3D shape data computed in computer as real object by using 3D printer for the restoration that has been performed manually. The missing part of a cultural asset is computed into computer data first and is printed out by using 3D printer to undergo a simple shaping process. The result of 3D printer application showed that repetitive output and shape and figure revision of digital data were possible, and it was possible to improve the degree of completedness of restoration through test output using various types of restoration materials using various materials. For the purpose of verifying the possibility of applying 3D printer to restore missing part of earthenware, two pieces of modern reproductions, namely, the Seven Treasure Incense Burner and Earthenware with Wagon Wheel Decoration, were artificially damaged. The restoration result showed that compared to manual work, it showed better effectiveness in curtailing work time and reproducing accurate shape. On the other hand, secondary manual work was slightly needed for detailed binding and to vividly express surface texture.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.28-31
• /
• 1998

It is difficult to make an artificial central incisor similar to natural tooth. All ceramic porcelain of this patient is not esthetic, and there is gingival recession due to ill-fitted margin. She has class II division 1 occlusion, so upper central incisors is labioversed. Upper light central incisor is well-characterized but the yellowish brown color of dentin is appeared on the incisal third portion of the central incisor. At 1st trial, the shape and characterization of restoration is good but shade is little dark. At 2nd trial, the shape is better but patient complained on black triangle of mid interdental space, so mesiocervical portion of restoration is overcontoured to compromise the black triangle. Completed metal ceramic crown is in harmony with the adjacent central incisor in aspect of shape, shade, and characterization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.711-714
• /
• 2015

A new technique for image restoration using Weighted cross-shaped median filter with edge-detection algorithm is proposed in this paper. It consists of simple hypothesis test for edge-detection, and makes use of the weighted cross-shape window. This method is applied to noise corrupted image and its results are compared with those of median filters. As for the experimental result, method of weighted cross-shape median filter is superior to other median filters.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.8 no.1
• /
• pp.10-17
• /
• 1999

Replacements for natural dentition must fulfil many criteria. An important aspect, especially for the patient, is aesthetic consideration. The shape and colour can be important factors in the aesthetic success of an anterior restoration. In order to allow for proper shape; the outline form, the spatial position of individual teeth and the surface characteristics must be considered. For the colour; translucency, value, chroma and hue must be expressed exactly. The dentist and technicians should catch up these very specific characteristics of the patient and convert them accurately to the restorations with the simplest way.

• Korean Journal of Heritage: History & Science
• /
• v.35
• /
• pp.100-118
• /
• 2002

Originally, Gyeongcheonsa pagoda was located in Busosan, Jungyeon-ri, Gwangdeok-myeon, Gaepung-gun, Gyeonggi-do,but it has suffered from being taken out to Japan illegally in 1907 and being returned to Korea in 1918. After returned to Korea, Gyeoncheonsa Pagoda had been neglected and restored in 1960. It had been exhibited outside the Gyeingbokgung Palace after restoration, but many problems were raised. It was taken to pieces in 1995 and it is conservation and restoring today. However, the top of pagoda is necessary to be researched about its archetype because the shapes of stupa in 1902 and in 1960(the shape of pagoda after restoration) are all different from its archetype. According to picture datum in 1902, the top of pagoda was a Korean building type on a 10 layered roof stone. On the other hand, when it was restored in 1960, cement suspected as a anda was taken place between Korean building type and a 10 layered roof stone. Therefore, I am going to examine Restoration of Gyeongcheonsa pagoda in this thesis. When we examine historical records of Geongcheonsa and datum of parts, we can know that the pagoda was established in 1348(Goryeo Dynasty) but it is difficult to know the truth of its establishment and demolition of Gyeongcheonsa-temple. Three ways to restore the top of the pagoda of Gyeoncheonsa Pagoda can be c o n s i d e r e d . First, Korean building type made by metals is located on a 10 layered roof stone, which is same to picture datum in 1902. Second, the shape of and a type, which is similar to the shape when it was restored in 1960's. Also it is similar to Lamapagoda type. Third, to restore the top of pagoda of gabled roof type, which is similar to the top of pagoda of Wongaksagi P agoda. However it is necessaray to exmamine functions about circle grooves hollowed out in a 10 layered roof stone in restoration. Also we need to find out the archetype of dragon sculpture through the dragon claws left on an edge of a 10 layered roof stone.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.4
• /
• pp.103-111
• /
• 2018

The Soswaewon Garden, which was constructed by Yang San-Bo around 1520, is a private traditional garden in Korea. Soswaewon Garden has long been and still is the focus of continuous research. However, relatively few studies have been conducted on the restoration of buildings that were lost in the past. The Goam-Jeongsa and Boohwondang buildings, which were lost in 1597 during the Japanese invasion, were restored in 1614 and depicted in a picture of Soswaewon Garden in 1755. However, they eventually disappeared and no longer exist in the present. Therefore, the restoration of these two buildings is considered an urgent task. This research aims to search for the original location of these buildings and estimate their size and shape in terms of physical space. Several years ago, an estimation of the building site was carried out, providing a stepping stone on this matter. This can be studied through "Soswaewon's 48 quatrains with five Chinese characters in each line," "Soswaewon-sasil," and "Soswaewon's drawing." Some parts of the shape of Soswaewon also appear in the "Yuseoseokrok," which is helpful. Thus, in this research, information on the Goam-Jeongsa and Boowondang buildings appearing in research results and literature to date are collectively analyzed. The location and architectural features of both buildings are identified by focusing on excavations. Also, for the purpose of restoration planning, base data on the location, size, and shape of both buildings are presented. In line with this process, a valid restoration plan is presented by analyzing the abovementioned historical research materials and comparing empirical data, such as excavation results.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.71-80
• /
• 2019

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.547-551
• /
• 2009

In recent years, a film restoration has gained increasing attention by many researchers, to emergence of variety multimedia and to importance of video preservation. Blotch is the most frequent degradation in old film. This paper presents a blotch detection method using color and shape feature. The proposed method is two major modules: a SROD detector using impulsive feature and NN-based detector using shape feature. To assess the validity of the proposed method, the experiments have been performed on several old films.

• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.755-760
• /
• 2009

Purpose: Breast surgeons usually insert tissue expander or implant beneath the subpectoral - subglandular dual plane in breast reconstruction. But sometimes it happens unsatisfactory lower pole fullness, asymmetric inframammary fold and breast shape because there is implant migration due to the pectoralis major muscle contraction and gravity. To solve all the problem like these, we introduce implant breast reconstruction using AlloDerm$^{(R)}$(LifeCell Corp., Branchburg, N.J.) sling. Methods: The AlloDerm$^{(R)}$ sling was used in 13 patients and 18 breasts for implant breast reconstruction. After mastectomy, costal and lower sternal insertion of pectoralis major muscle was detached. Rehydrated AlloDerm$^{(R)}$ was sutured to the chest wall and serratus anterior fascia at the level of inframammary fold downward and to lower border of the pectoralis major muscle upward like crescent shape with tension free technique after implant insertion into the subpectoral - subAlloDerm dual pocket. Results: We make satisfactory lower pole fullness, symmetric inframammary fold and breast shape. In conclusion, patients obtain relatively natural breast shape. There was no complication except one case of capsular contracture and one case of breast cellulitis. Conclusion: Implant breast reconstruction using AlloDerm$^{(R)}$ sling makes easy to get natural breast shape through satisfactory lower pole fullness, symmetric inframammary fold and implant positioning.