• 한국식품영양과학회지
• /
• 제21권4호
• /
• pp.353-366
• /
• 1992

본 연구는 참치의 석유 에텔 추출물로 부터 항암 효과가 있는 활성 성분을 분리 정제하고, 흰생쥐의 임파모 세포인 LI210 과 P388, 인체 장암세포인 HCT-48, HT-29 및 HRT-18를 대상으로 단계별로 얻어지는 성분의 항암 활성올 측정하고, 그 물질의 생체내에서의 작용 기전을 밝히기 위해 여러가지 면역학적 실험을 수행하였다. In vitro배양액에서의 인체 결장암세포인 H HCT-48에 대해, crude extract는 배양액 1ml강 $60\mu\textrm{g}$ 첨가시 증식이 2배로 억제되었으며(1 unit), 이를 column chromatography 수행하여 얻은 fraction D의 1 unit은 $2 22\mu\textrm{g}$이며, 다시 TLC를 하여 얻은 Spot I 의 1 unit은 $9\mu\textrm{g}$으로서 정제 했을때 277배 증가하였다. Spot I 은 GC/ M5에 의해 7가지 성분이 섞여있는 혼합물로서 이 중 4가지 생분은 $C_{14:0},\;C_{16:0},\;C_{17:1},\;및\;C_{18:0}$인 지방산으로 확인이 되었으며, 나머지 3가지는 지방 성분으로 분자식은 확인되지 않았다. 다른 인체 장암 세포인 HT-29과 HRT-18에 대한 crude extract의 1 unit은 $64\mu\textrm{g}\;및\;54\mu\textrm{g}$이었으며 frattion D의 1 unit에 해당하는 양은 두 세포 모두 약 $34\mu\textrm{g}$이었다. 또한, 생쥐의 백혈병 성 임파모 세포인 L1210과 P388의 경우 crude extract의 1 unit에 해당하는 양은 $2-2.5\mu\textrm{g}$이며, fraction D의 경우는 $1.2-1.4\mu\textrm{g}$으로서 참치 추출물의 세포 종식 억제력은 백혈병성 임파모세포에서 인체 장암세포보다 높았으며, 암세포의 종류에 따라 효과의 차이가 있었다. 참치 추출물(fraction D)을 첨가한 배양액에서 배양한 HCT-48 세포획 크기 분포도는 배양시간이 경과함에 따라 세포의 크기가 작아지며, 현미경 사진에서 보면 본래의 형태가 위축되거나, 세포의 주위가 흐트러지면서 사면 현상을 보였다. 참치 석유 에텔 추출물에는 DHA가 18.8%를 차지 하며 EPA는, 3.25% 포함되어 있었다. 대조군 생쥐에 비해 S-180을 접종한 후 참지 추출물을 투여한 생쥐에서 용혈반 형성 세포수와 혈청 단백질 중 immunoglobulin의 relative %가 현저히 증가되었다. 그러나 비장의 자연 살해 세포의 활성에는 변화를주지 않았다. 이상의 결과로 보아, 참치의 석유 에델 추출물중에 in vitro에서 인체 장암세포 및 백혈병성 임파모세포의 증식 억제 및 생체내에서 면역 증강 효과를 나타내는 성분이 존재함을 알 수 있다.

• 지능정보연구
• /
• 제24권1호
• /
• pp.227-252
• /
• 2018

인터넷의 발달을 통해 지속적으로 인스턴트 커뮤니케이션이 발달해왔다. 인스턴트 커뮤니케이션에서 가장 대표적인 것이 메신저 애플리케이션이다. 메신저 애플리케이션에서 이모티콘은 송신자의 감정 전달을 보완하기 위해 활용됐다. 메신저 애플리케이션 송신자의 감정 전달에 약한 모습을 보이는데 그 이유는 면대면 커뮤니케이션이 아니기 때문이다. 이모티콘은 과거 화자의 기분 상태를 나타내는 기호로만 사용됐다. 그러나 현재는 이모티콘은 감정 전달 뿐만 아니라 개인의 특성과 개성을 나타내고 싶어 하는 소비자의 심리를 반영하는 형태로 발전해가고 있다. 이모티콘의 사용 환경이 개선되었고, 이모티콘 자체가 발전함으로써 이모티콘 자체에 대한 관심도는 증가하였다. 대표적인 예로 카카오톡, 라인, 애플 등에서 서비스를 진행하고 있으며, 관련 컨텐츠 상품의 매출도 지속적으로 증가할 것으로 전망하고 있다. 이모티콘 자체의 관심도 증가와 관련 사업의 성장세에도 불구하고 현재 적절한 이모티콘 추천 시스템이 부재하다. 국내 점유율 90% 이상의 메신저 애플리케이션인 카카오톡조차 단순히 인기 순이나 최근 순, 혹은 간략한 카테고리 별로 분류한 정도이다. 소비자들은 원하는 이모티콘을 찾기 위해서 스크롤을 계속해서 내려야 하는 불편함이 있으며, 본인이 원하는 감성의 이모티콘을 찾기 어렵다. 소비자들이 편의성 향상과 기업의 이모티콘 관련 사업의 판매 매출 증가를 위해 소비자가 원하는 이모티콘을 추천해줄 수 있는 이모티콘 추천 시스템이 필요하다. 적절한 이모티콘을 추천하기 위해서 소비자가 이모티콘을 보고 느낀 감성에 대해 정량화할 필요성이 있다. 정량화를 통해 소비자가 원하는 이모티콘 셋이 가진 특징과 감성에 대해 분석할 수 있으며, 분석 결과를 토대로 소비자에게 이모티콘을 추천할 수 있다. 이모티콘은 메타데이터화의 방법으로 정량화가 가능하다. 메타데이터화 방법은 빅데이터 시대에 비정형, 반정형 데이터에 대해서 의미를 추출하기 위해 데이터를 구조화 혹은 조직화하는 작업이다. 비정형 데이터인 이모티콘을 메타데이터화를 통해 구조화한다면, 쉽게 소비자가 원하는 감성 형태로 분류할 수 있을 것으로 생각한다. 정확한 감성을 추출하기 위해 감정과 관련된 선행 연구를 통해 7개의 공통 감성 형용사와 한국어에서만 나타나는 은유 혹은 표현적 특징들을 반영하기 위해 하위 세부 표현들까지 고려했다. 이모티콘의 가장 큰 특징인 캐릭터를 기반으로 "표상", "형상", "색상"의 범주에서 세부 하위 감성들을 수집했다. 정확도 높은 추천 시스템을 설계하기 위해 감성 지표만이 아니라 객관적 지표도 고려하였다. 메타데이터화 방법을 통해 이모티콘이 갖고 있는 캐릭터의 특징을 객관적 지표로 14개, 감성 지표로 활용하기 위해 감성 형용사를 36개를 추출하였다. 추출된 감성 형용사는 대비되는 형용사로 구성하여 총 18개로 줄였으며, 18개의 감성 형용사는 카카오톡의 이모티콘을 인기 순으로 임의의 40개 셋을 대상으로 측정하였다. 측정을 위해 이모티콘을 평가할 조사 대상자 온라인으로 모집하였고, 277명의 20~30대의 이모티콘을 구매한 경험이 있는 소비자를 대상으로 설문을 진행하였다. 설문응답자에게 서로 다른 5개의 이모티콘 셋을 평가하도록 하였다. 평가 결과 수집된 18개의 감정 형용사는 요인분석을 통해 감성 지표 요인으로 추출하였다. 추출된 소비자 감성 지표의 요인은 "코믹", "부드러움", "모던함", "투명함"이었다. 이모티콘의 객관적 지표와 감성 지표 요인을 활용하여 소비자 만족과의 관계를 분석하였고, 객관적 지표와 감성 지표 간의 관계도 분석하였다. 이 과정에서 객관적 지표가 소비자 태도에 바로 영향을 주는 것이 아니라 감성 지표 요인을 통해 소비자 태도에 영향을 주는 매개 효과가 있음을 확인하였다. 분석 결과는 소비자의 감성 평가 메커니즘을 밝혀냈고, 소비자의 이모티콘 감성 평가 메커니즘은 객관적 지표가 감성 지표 요인에 영향을 미치며, 감성 지표 요인은 소비자 만족에 영향을 미치는 관계였다. 따라서 감성 지표 요인의 네 가지만으로 이모티콘 추천 시스템을 설계하였고, 추천 방법은 각 감성과의 거리를 유클리디안 거리로 측정하여 거리의 차가 0에 가까울수록 비슷한 감성으로 정의하였다. 본 연구에서 제안한 이모티콘 시스템의 검증을 위해 각 감성 지표 요인과 소비자 만족의 평균을 지표 값으로 활용하여 각 이모티콘 셋의 감성 패턴을 그래프로 비교하였고, 추천된 이모티콘들과 선택된 이모티콘이 대체로 비슷한 패턴을 그리는 것을 확인하였다. 정확한 검증을 위해 사전 조사하였던 소비자를 대상으로 이모티콘 추천 시스템이 제시한 결과와 유사하게 평가하였는지 유사 순위를 세 구간으로 나누어 비교하였고, 순위별 예측 정확도는 결과 1순위 81.02%, 2순위 76.64%, 3순위 81.63%였다. 본 연구의 결과는 학문적, 실무적으로 다양한 분야에서 활용 가능한 방법론을 제시하였으며, 기존에 없던 이모티콘 추천 시스템의 설계를 통해 소비자에게는 편의와 이모티콘을 서비스하는 기업에는 매출증대의 효과를 가져올 것으로 예상한다. 그리고 본 연구를 통해 지능형 이모티콘 시스템으로 발전할 수 있는 단초를 제공했다는 점에서 의미가 있다. 본 연구에서 제안한 감성 요인들을 활용하여 감성 라이브러리로 사용함으로써, 새로운 이모티콘 출시 시 감성 평가의 지표로 활용할 수 있다. 축적된 감성 라이브러리와 기업의 판매 데이터, 매출 정보, 소비자 데이터를 결합하여 본 연구에서 제안한 추천 시스템을 복합형 추천 시스템으로 발전시켜 단순 소비자의 편의성이나 매출 증가뿐만 아니라 기업에서 전략적으로 활용 가능한 지적 자산으로 활용할 수 있을 것으로 판단한다.

• 한국의류학회지
• /
• 제32권12호
• /
• pp.1837-1847
• /
• 2008

카멜레온은 미끈한 몸통과 화려한 색 띠들을 가진 작은 도마뱀을 말하는데 빛, 온도, 기분에 따라 색이 변화하는 것이 특징이다. 또한, 변덕스러운 사람, 요염하고 매혹적인 사람, 속물적이면서도 상황에 재빨리 대처하는 사람 등을 일컬어 카멜레온이라고 하기도 한다. 본 연구의 목적은 상황에 따라 색이 변하는 카멜레온 이미지를 요염한 변덕장이들의 섹시한 스타일로 비유해서 Wearable Art에 실루엣, 색, 텍스처 개발 기술을 접목하여 표현하고자 한 것이다. 연구방법은 카멜레온의 사실적, 개념적 특징들을 Wearable Art 작품으로 표현해 나가는 단계에서 특히, 옷감 표면에 다양한 제작 기술들을 실험해 보는 과정으로 진행되었다. 작품 이미지 컨셉은 'sensuality', 'tempting', 'splendid', 'brilliant', 'fascinating' 등으로 표현했고, 연구자의 미래지향적 기호와 움직임을 통한 편하고(comfortable) 즐거울 수 있는(enjoyable)개념 역시 포함되도록 하면서 작품 완성도를 높였다. 디자인 및 제작 포인트는 실제 카멜레온의 전체 라인, 색, 표피 질감 등 그 특징들을 분석하여 본 작품의 형태, 색, 텍스처 등을 통해 상징적으로 표현하도록 하였고, 동시에 요염한 변덕장이 카멜레온의 이미지가 암시적으로 나타날 수 있도록 하였다. 작품 실루엣은 바디컨셔스 라인(body-conscious line)이다. 이것은 카멜레온의 날씬하고 미끈한 몸체를 이미지화 한 것이며 동시에, 속세적이면서도 미래적인 이미지가 암시적으로 표현되도록 한 것이다. 카멜레온 등뼈가 드러난 것을 드레스 등이 노출되도록 하여 표현하였는데 이것은 동시에 관능적이고 요염한 카멜레온 이미지를 나타내는 것이다. 카멜레온의 유선형 머리부분 표현은 완만한 삼각형 모양의 후드패턴을 통해, 카멜레온의 길게 말린 꼬리 표현은 불규칙적인 플레어의 햄 라인으로 처리하여 상징적으로 표현하였다. 카멜레온 색들은 선명한 비비드 톤이면서 동시에 빛 또는 기분에 따라 색이 변화하는 것이 특징인데, 작품 제작 과정에서도 빛과 각도에 따라 드레스 색이 조금씩 다르게 보이는 효과를 가장 중요하게 연구하였다. 검정색 쉬폰 위에 퓨셔(fuchsia)색 작은 벨벳 물방울 무늬가 박힌 소재를 주 소재로 하여 표면에 입체적인 텍스처를 줌으로서 빛의 각도에 따라 두가지 색이 섞여져서 전체적으로 색이 다르게 보이는 착시 결과를 가져왔다. 허리에서의 빨강색과 파란색 계열의 다양한 스톤들은 실제 카멜레온 스킨 이미지와 더불어 돌출된 입체감과 그라데이션 효과로 인해 움직임에 따라 색이 다르게 보이는 결과를 가져왔다. 50% 쉬폰/50% 폴리에스테르에 벨벳 다트 무늬가 들어가 있는 원단을 사용하여 옷감 표면에 탄성실을 이용한 스모킹 주름효과를 주는 기술을 접목시켜 flexible한 스트레치성 옷감으로 재탄생시킴과 동시에 소재 표면에 오돌토돌한 텍스처가 생기게 하였다. 이것은 카멜레온의 표피와 흡사하면서 동시에 몸에 밀착되는 결과를 가져와 섹시하면서도 편안한 작품 이미지 표현에도 적절한 역할을 한다. 스톤장식은 아크릴릭카보숑(acrylic cabochons)과 잼스톤(gemstones)들을 섞어서 사용했는데 카멜레온 등 표피 질감을 상징함과 동시에 색이 다르게 보이는 효과를 나타낸다는 점에서 본 작품의 포인트이다. 드레스 제작은 주로 바이어스 결을 이용한 드레이핑 기법을 이용하였는데, 후드가 앞 몸판과 연결되어 있고 불규칙적인 사각형들이 앞에서 뒤로 옆 솔기 없이 연결되어 있다. 옷은 살아 움직이는 사람이 입어서 가장 편하고 즐거우면 옷의 완성도가 가장 높다고 할 수 있다. 카멜레온 드레스 역시 움직이는 신체와 함께 색이 다르게 보이는 기법과 효과를 연구하는 과정에서 편하고 즐거운 Wearable Art를 완성할 수 있었다. 바로 이점이 입는 예술 즉, 입고 즐길 수 있는 옷에 예술미를 가미한 Wearable Art의 진미가 아닐까 생각한다.

• 지능정보연구
• /
• 제18권3호
• /
• pp.153-169
• /
• 2012

전시회는 새로운 상품이나 서비스를 현재 고객들과 미래의 잠재고객들에게 홍보하기 위해 개최하는 효과적인 마케팅 수단으로 중요하다. 기업들은 전시회에 참여를 통해 현재 고객 및 잠재고객들과 대면접촉을 함으로써 기업의 이미지 제고 및 새로운 판로를 확보할 수 있다. 이처럼 전시회의 경제적 중요성이 커짐에 따라, 전시주최자들은 참여기업 및 참관객을 유치하기 위하여 새로운 IT 기술을 전시회에 적용하고 있을 뿐만 아니라 연구자들 또한 참관객의 관람패턴을 분석하기 위하여 다양한 연구를 시도하고 있다. 최근에는 스마트 기술이 발전함으로써 전시 공간 내에서 참관객의 활동을 실시간으로 모니터링 할 수 있어 온라인 전시환경처럼 오프라인 전시회를 방문한 참관객의니즈를 실시간으로 추론하여 참관객의 선호에 적합한 서비스를 제공하기 위한 부스 추천시스템에 대한 연구가 활발히 진행되고 있다. 그러나 새로운 기술 개발 측면에서 시스템의 성능을 개선하려는 연구는 지속적으로 진행되어 왔으나 향후 시스템의 개발 방향 및 보급 활성화에 영향을 미치는 요인에 관한 연구들이 부족한 실정이다. 부스 추천시스템은 스마트 전시환경에서 새로 도입되는 기술로 부스 추천시스템에 대한 참관객의 수용 후 재사용 의도는 TAM 관점보다는 부스 추천시스템이 참관객의 선호에 적합한 추천정보를 제공하는가에 초점을 맞출 필요가 있다. 따라서, 본 연구에서는 기존 문헌 고찰을 통해 전시환경에서의 부스 추천시스템에 대한 참관객의 만족 및 재사용 의도에 영향을 주는 요인을 도출하여 연구모형을 설계하였다. 이를 통해 향후 스마트 전시환경에서 부스 추천시스템의 개발과 보급 전략에 있어 유용한 시사점을 제공하고자 하였다. 이러한 연구목적을 달성하기 위하여 2011년 11월 DMC 컬처 오픈 행사에서 부스 추천시스템을 사용한 참관객을 대상으로 설문조사를 실시하였고 회귀분석을 통해 가설을 검증하였다. 그 결과, 참관객의 만족에 영향을 미치는 요인은 부스 추천시스템의 효과성, 편의성, 추천품질, 의외성으로 나타났다. 또한, 부스 추천시스템에 대한 참관객의 만족은 재사용 의도 형성에 긍정적인 영향을 미치는 것으로 밝혀졌다. 본 연구가 가지는 의의는 다음과 같다. 먼저, 본 연구결과를 토대로 스마트 전시환경에서 부스 추천시스템에 대한 참관객의 지속적인 서비스 이용을 유도하기 위한 전략을 수립할 때 고려해야 할 주요한 요인을 실증연구를 통해 구체화시켰다는데 의의가 있다. 또한, 스마트 전시환경에서 부스 추천시스템이 성공적으로 도입 및 활용되기 위해서는 참관객의 수용 전후 차별화된 관리가 필요함을 본 연구결과를 통해 제시하였다.

• 한국식품영양과학회지
• /
• 제34권2호
• /
• pp.202-208
• /
• 2005

본 연구에서는 청소년기 남녀 중학생의 건강과 관련된 임상 증상에 따른 식습관, 영양지식, 영양태도를 알아보기 위하여 조사를 실시하였다. 좋지 않은 건강상태를 나타내는 임상증상 중 자주 생긴다고 답한 항목이 1개 이하인 경우를 건강군, 2개 이상의 항목에서 자주 생긴다고 답한 경우를 비건강군으로 분류하여 각 조사 항목을 비교 분석한 결과를 요약하면 다음과 같다. 전체 대상자들(524명)의 평균 연령은 14.0세였으며, 신장은 남학생 162.0 cm, 여학생 157.2 cm였고, 체중은 남학생 53.4 kg, 여 학생 49.4 kg으로 신장과 체중 모두 남학생이 높았다. 신장과 체중으로부터 산출한 체질량지수(BMI)는 남학생 20.3 kg/$m^2$, 여학생 20.0 kg/$m^2$로 모두 정상 범위에 속하였다. 건강군(289명)과 비건강군(235명)의 평균 연령, 체중, 신장, 체질량지수는 유의적인 차이를 보이지 않았다. 체형 인식, 만족도, 체중조절 시도여부를 비교한 결과 본인의 체형에 대한 인식은 건강군과 비건강군 간에서 유의적인 차이를 보이지 않았으나, 체형만족도에서는 유의적인 차이를 보여 본인의 체형에 만족하지 않는다는 비율이 건강군 여자의 33.1%에 비하여 비건강군 여자는 46.2%로 높게 나타났다(p<0.05). 지난 1년간의 체중조절 시도 여부에 대하여서도 비건강군 여자의 59.5%가 체중을 감소시키기 위하여 노력하였다고 답하여 건강군 여자의 38.5%에 비하여 유의적으로 높았다(p<0.01). 남학생의 경우에는 체형만족도와 체중 조절 경험에 있어서 두 군간 유의한 차이를 보이지 않았다. 영양지식과 영양태도 점수를 비교한 결과 건강군과 비건강군간에 유의적인 차이를 보이지 않았다. 끼니별 식사빈도를 조사한 결과 여자의 경우 아침식사를 주4회 이하로 하는 경우가 건강군은 30.7%였으나, 비건강군의 경우 44.0%로 높았다(p<0.05). 저녁 식사는 주 4회 이하의 식사를 하는 경우가 건강군은 10.7%인 반면, 비건강군은 18.8%로 아침 과 저녁 식사 모두 여자 비건강군의 결식률이 유의적으로 높게 나타났다(p<0.01).외식빈도는 남자의 경우 주 3회 이상에서 비건강군이 56.5%로 건강군의 42.7%보다 유의적으로 높았으며, 간식빈도는 여자의 경우 건강군에 비하여 비건강군이 유의적으로 높았다(p<0.05).식사의 구성을 조사한 결과 유의적인 차이를 보이지는 않았으나 비건강군이 건강군에 비하여 세 끼 식사의 구성이 불량하다고 답한 비율이 높은 경향을 나타내었다. 본 연구 결과를 통하여 건강의 이상 여부를 반영하는 임상증상의 빈도가 높은 청소년기 남녀 중학생의 경우 아침과 저녁의 결식빈도 및 외식과 간식의 빈도가 높았고, 아침식사의 질과 체형만족도가 낮은 것으로 나타나 청소년의 건강과 식습관 및 체형만족도가 상호 관련성이 높은 것으로 나타났다. 따라서 본 연구 결과는 성장기 청소년의 건강 유지를 위하여 바람직한 식습관의 중요성을 재인식할 수 있었으며, 올바른 식습관 확립을 위한 영양교육의 중요성이 재확인되었다.

• 한국균학회지
• /
• 제21권3호
• /
• pp.200-211
• /
• 1993

사철느타리버섯 Pleurotus florida 균주와 느타리버섯 P. ostreatus 2균주의 영양요구주로 원형질체 융합하여 체세포 잡종을 얻어 자실체의 특성과 후대의 유전자 재조합을 조사하였다. 사철느타리 ASI 2016의 ASI 2-3-rib와 느타리 ASI 2018의 ASI 2-1-arg의 원형질체 융합으로 40개의 체세포잡종($P1{\sim}P40$)을 얻어 그중 P5에서 얻은 유전자 재조합주 P5-M43-arg rib를 다시 느타리 ASI 2001의 ASI 2-13-pro orn과 융합하여 38개 체세포잡종 ($P41{\sim}P78$)을 얻었는데 생산력이 높고 품질이 우수한 P72를 "원형느타리버섯 Wonhyeongneutaribeosus"으로 명명하여 1990년에 보급하였다. 자실체의 갓 색택이 yellowish white인 사철느타리 ASI 2016과 bluish grey인 느타리 ASI 2018의 원형질체 융합주는 중간색인 brownish grey를 나타내었고, P5에 다시 violet grey인 느타리 ASI 2001을 융합한 것은 bluish grey를 나타내었다. 40균주($P1{\sim}P40$)의 자실체 생산량에 있어서 10%만이 양친보다 높았고 40%는 낮았으며 나머지는 양친과 유사하였는데 친주 ASI 2018의 수량지수를 100으로 할 때 융합주는 $27.0{\sim}155.2$로 나타났으며, 체세포 잡종 38균주($P41{\sim}P78$)에 있어서 21.0%는 양친보다 높았고 26.3%는 낮았으며 나머지는 양친과 유사하였는데 ASI 2001을 100으로 할 때 체세포 잡종은 $40.5{\sim}141.3$으로 잡종강세 현상이 나타났다. 수량에 영향을 주는 7 개 형질에 관한 특성에 있어서 P5는 양친주보다 유효경수와 대의 길이는 증가하나 갓의 크기, 대직경, 개체중은 감소하였고, 다발무게와 갓 두께는 유사하였으며, P49는 갓의 크기는 양친과 유사하나 나머지 6개 형질이 모두 증가하였으며 P72는 다발 유효경수와 갓의 크기는 양친과 유사하나 나머지 5개 형질은 모두 증가하였다. esterase 동위효소 분석 결과 P5는 양친의 밴드를 대부분 가지면서 새로운 밴드양상이 형성되었으며 융합주 P48, P49, P72의 상호간에는 밴드의 차이가 없었으나 양친인 ASI 2001과 P5의 밴드를 대부분 가지는 양상을 나타내었다. 사철느타리 ASI 2016과 느타리 ASI 2018의 4개 융합조합 7개 융합주의 유전형질 분리에 있어서 분리되는 유전자형은 원영양형 prototroph, 양친의 한쪽 편친형, 양친의 다른 편친형, 영양요구성 유전자 재조합형으로 나타나며 그 기대치는 1 : 1 : 1 : 1이나 원영양형이 가장 많았으며 2개 융합주를 제외하고는 양친 중 사철느타리 형질만 분리되었으며 양친형과 유전자 재조합형이 거의 1 : 1로 분리되었다. P5 유전자 재조합주 arg rib와 ASI 2001의 pro orn의 체세포 잡종 P48, P49, P72의 분리에 있어서 pro orn 친은 분리되지 않았으며 각 유전형질 arg, rib, pro, orn의 비가 P49, P72는 거의 4 : 1 : 1 : 1로 나타났으나 P48은 pro, orn형질이 훨씬 적게 나타났으며 유전자 재조합형의 비율이 아주 높은 91%이상이었다.

• 한국조경학회지
• /
• 제47권5호
• /
• pp.49-65
• /
• 2019

본 연구는 국제 식물 신품종 보호제도가 실시된 이후 나라꽃 무궁화의 국내외 개발 동향을 조사 분석하고, 향후 나라꽃 무궁화를 국내 보급 확대뿐만 아니라, 해외수출을 촉진시키고, 활용범위를 넓히기 위한 기초 자료로 이용하고자 하였다. 국내에서 개발된 무궁화 품종 중 2004년부터 2018년까지 국립종자원에서 품종보호권 번호를 획득한 품종은 총 97개였다. 국내 육성 품종 중 꽃이 특이한 품종들은 정원 내 초점식재용으로 활용이 가능하였으며, 수세가 강하고 키가 큰 교목성 품종들은 가로수 및 초점식재용으로, 가지의 배열이 조밀하고 키가 작은 왜성형은 분화 및 분재용으로 이용되었다. 국내 품종보호권을 획득한 품종들은 대부분 홑꽃이었으며, 반겹꽃 품종은 2개, 겹꽃 품종은 전혀 없었다. 꽃색의 경우, 꽃잎이 분홍으로 단심이 있는 품종이 57개로 가장 많았으며, 흰색 꽃잎에 단심이 있는 품종이 21개로 많았다. 국내 품종보호권을 획득한 품종 중 교잡육종법으로 개발된 품종이 61개로 가장 많았으며, 다음으로 종간 교배육종을 통해 육성된 품종이 23개, 방사선 처리와 돌연변이 육종으로 개발된 품종이 7개였다. 미국 특허청(USPTO)에 출원한 무궁화 품종은 미국, 영국, 네델란드에서 각각 7개로 가장 많았으며, 다음은 한국에서 4개 품종, 벨기에에서 3개 품종이 등록되어 총 34 품종이었다. 유럽공동체 식물품종사무국(CPVO)에 등록한 무궁화 품종은 프랑스에서 육성된 품종이 16개 품종으로 가장 많았으며, 다음은 네델란드에서 9개 품종, 영국에서 5개 품종, 벨기에에서 1개 품종으로 총 32 품종이었다. 미국과 캐나다에서 동시에 식물 특허 및 식물 육성자 권리를 받은 품종은 'America Irene Scott', 'Antong Two', 'CARPA', 'DVPazurri', 'Gandini Santiago', 'Gandini van Aart', 'ILVO347', 'ILVOPS', 'JWNWOOD 4', 'Notwood3', 'RWOODS5', 'SHIMCR1', 'SHIMRR38', 'SHIMRV24', 'THEISSHSSTL' 등 15 품종이었다. 국내 품종보호권과 해외 식물 특허를 동시에 취득한 품종으로 'SHIMCR1'과 'SHIMRV24'이 있었다. 미국 식물 특허와 유럽 신품종보호권을 동시에 받은 무궁화 품종은 총 14 품종이었다. 미국 식물 특허권을 획득한 무궁화 품종 중 겹꽃 품종이 18개(52.9%), 반겹꽃이 4개(11.8%), 홑꽃 품종이 12개(35.3%)로 나타나 겹꽃 품종이 많았으며, 유럽 품종보호권을 획득한 무궁화 품종에서도 겹꽃 품종이 11개(34.3%), 반겹꽃이 7개(21.9%), 홑꽃 품종이 14개(43.8%)로 나타나 미국과 같은 결과를 보였다. 향후 나라꽃 무궁화의 품종은 국내 보급 확대 및 해외 수출을 위해서는 꽃의 종류가 홑꽃에서 겹꽃 품종의 개발이 요구되어지며, 꽃색 또한 적색, 청색 등 다양해야 할 것이다. 또한 무궁화 품종의 신품종 개발 시 미국 및 유럽품종처럼 화단 지피용 및 가장 자리식재용으로 이용하기 위해 키가 작고 가지가 아래로 향하는 품종 개발이 요구되어야 할 것이다. 또한 키가 작고 마디의 길이가 짧으며 분지각도가 좁은 품종을 개발하여 분화용 및 분재용으로 개발하여 실내에서도 무궁화를 감상할 수 있도록 해야 할 것이다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.