• ALGAE
• /
• v.26 no.4
• /
• pp.299-315
• /
• 2011

The morphology, taxonomy, and distribution of species belonging to the diatom family Rhizosoleniaceae were studied from the marine coastal waters of Korea. Rhizosolenid diatom taxa were collected at 30 sites from September 2008 to February 2010 and were analyzed by light and scanning electron microscopy. We identified 6 rhizosolenid genera, including Rhizosolenia, Proboscia, Pseudosolenia, Neocalyptrella, Guinardia, and Dactyliosolen. We describe 5 genera in this study, except Rhizosolenia. Five genera were compared in detail with congeneric species. Six genera within the family Rhizosoleniaceae were divided into two groups based on morphological diagnostic characters including valve shape, areolae pattern, the shape of external process, and girdle segments in the column. The first group had a conoidal valve and loculate areolae, which comprised Rhizosolenia, Proboscia, Pseudosolenia, and Neocalyptrella, and the second group of Guinardia and Dactyliosolen showed a flat or rounded valve and poroid areolae. Important key diagnostic characters were based on valve shape, areolae pattern on the segment, external process, position of the tube, and the valve margin. D. phuketensis was new to Korean coastal waters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.119-128
• /
• 1993

This paper is to show the difference in body shape between 2 female groups; one group of 129 subjects is from 18 to 24 years old and the other group of 49 subjects from 25 to 29. Anthropometric somatotyping method by Heath-Carter and descriptive classification method by Sheldon are applied to classify somatotype. There is no difference in somatotype between 2 groups. The average somatotype is 443, which is the balanced type. By comparing the results of T-test, principal component analysis, and factor score, detailed differences in body shape between 2 groups are shown. The results of factor score for obesity factor of both groups are almost same and agree to somatotype results.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1962

The objects of this experiment are to find out the local variation of the Dendrolimus Spectabilis Butler, of which sample was first collecteted 15 bodies of male and 35 bodies of female adult at Suwon area. the wing veins and the scale shape have been observed through the microscope (100) and the scale size (from the bottom of the scale to the top of the lobe) has also been measured by the micrometer. The results of this experiment are as follows: 1. There is nodifference between the venation of the male body and that of the female body. Also we can not find any differences between the right and the left wing, and between each body. The fore wings consit of 13 longitudinal veins and the only one "V" shape cross vein which is between the 5th and 6th vein. The hind wings consist of 9 longitudinal veins and the only one "V" shape cross vein which is mentioned above. 2. The scale types are divided into 4 Groups in its shape. (A) The scales of I Group are short and the lower parts of them almost look like a circle, having a small projection at their bottom. The upper parts of them have 2 or 10 lobes. We can find the lobes with fine hairs or the lobes without them at the top of the scales. (B) The scales of II Group are longer than that of I Group. The shape of the lower parts of the scales is similar to that of I Group. The upper parts of the scales have 2 or 10 lobes. (C) The scales of III Group are long and almost alike in a long wedgeshape. The upper parts of the scales have 2 Or IO lobes and we can find long fine hairs at the top of each lobe. (D) The scales of IV Group are long and the shape of the lower parts of the scales is similar to that of III Group. The lobes are short and not sharp. We can find 2 or 9 lobes. 3. The scales of I Group and II Group are distributed on the whole surface except on the outer margin. The most scales of III Group are distributed on the wing base. The scales of IV Group are distributed on the outer margin only. The scales with 4 or 5 lobes are most widely distributed not considering their Group or distributing parts. 4. In I Group the variation of the scale length become gradually greater as the number of the lobes are increasing. In II, III, IV Group, however, the variation of the scale length is in direct opposition to the above mentioned. The variation of the scale width becomes pretty small in any Groups and the scale width become wider as the number of the lobes are increasing. 5. The source of the wing colouration is pigmnetal colour, and the wing colouration is expressed by the amount of brown and white scales.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.230-243
• /
• 2009

The purpose of this study was to analyse the body sizes of $7{\sim}12$ years elementary school girls and also to categorize KS size dimensions by the detailed information of ages and body shapes. For the study, the data of SizeKorea(2004) was analysed. Height, bust, waist, hip, the ratio of waist to height and hip to height were significant between age groups, but the ratio of bust to height was not. Therefore, the increase of bust size was resulted in growth of bust circumference, instead of bust volume. In the same height group, over 11 year girls had smaller waist, while over 12 year girls had bigger hip. For Grouping girls by ages and body shapes, the ages were divided into 2 groups, under 10 years old and 11 to 12 years old. The body shapes classified into 3 groups 'Stout-shape', 'Middle-shape', and 'slim-shape', by the ratios of bust to height and hip to height. 'Stout-shape' was significantly big at the almost sizes, but 'Middle-shape' was significantly big at only circumferences, not lengths. In addition, drop(the difference between bust and hip) and lower-drop(the difference between waist and hip) were in inverse proportion to the ratios of bust to height and hip to height. It meant the increases of bust-ratio and hip-ratio of 'Stout-shape' were resulted in overweight, rather than female matureness. The distribution of sizes over 0.5% were grouped for grading system and the subtotal percentiles of each group were calculated for industrial data. The groups which covered more than 10% of consumers were 2 to 6 and the 1 or 2 groups for 'Stout-shape' were also observed, so that children's ready-to wear companies could use them efficiently for their own consumer target.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.1
• /
• pp.33-47
• /
• 2023

In this study, the difference in human body dimensions between the age groups of Generation M (27 to 39 years old) and Generation Z (20 to 26 years old) was analyzed. This study also analyzed if there was a change in the body shape of the MZ generation, who have different sensibilities from the "young people" of the past. In addition, major changes in human body dimensions were carefully analyzed and presented as basic data for clothing design. Therefore, a t-test was performed to verify the significant differences in the measurements of each age group. To examine the change in human body measurements according to the measurement year, the 7th and 8th size Korea data statistics were analyzed. The main required dimensions of clothing design were analyzed graphically for visual changes according to measurement year and age group. As a result of the analysis, Generation Z was found to have a difference in body shape from Generation M, and is generally smaller and slimmer with broader shoulders. In addition, the body shape change between the 7th and 8th measurement periods was significantly higher than the 8th measurement overall. Height has increased and back length has become shorter, resulting in a larger ratio of lower body length. In addition, the proportion of obesity abnormalities has increased. Therefore, since the dimensional system set from the past data can cause problems for the fitting of clothing for the MZ generation, it is necessary to design the clothing and reset the dimensional system making it suitable for the changed the body shape of the MZ generation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2001.11b
• /
• pp.149-154
• /
• 2001

멀티미디어 정보표현 기술인 MPEG-7 표준이 빠른 속도의 진전을 보임에 따라 이를 활용한 검색 기술 개발도 활발히 진행 중에 있다 방대한 량의 동영상 내용 검색 기술 연구에 있어서 우선적으로 고려되어야 할 부분이 내용이 연속되는 프레임들의 분류이다. 이를 위해서는 물리적인 장면전환이 이루어지는 부분에 대한 실시간 자동 cut detection 기술 및 이 컷 프레임 영상에 대한 내용 기술을 자동적으로 수행할 필요성이 있다. 각 컷 프레임의 자동 내용 기술의 전처리로써 본 논문에서는 장면전환이 생기는 프레임의 영상의 어떠한 정보도 사전 정보로 취하지 않고 사용자의 개입이 없는 상황에서 영상의 컬러 특성 및 에지 정보만을 가지고 shape 영역 segmentation을 자동으로 실행하는 방법을 제안한다. 제안한 방법의 성능은 segmentation된 영상과 원 영상과의 영역비교를 통한 유사도에 의해 평가하며, 시뮬레이션 결과에서 제안한 알고리즘은 평균 90%이상의 영역 분할이 정확하게 됨을 알 수 있었고, 컬러의 구분이 명확하지 않은 자연영상에서도 robust한 segmentation 결과를 나타냄을 본 연구를 통하여 알 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2016

For reaction injection molding (RIM) polyurethane was mixed in the mixing head by impingement mixing, injected into the mold, and cured quickly, as soon as the mold is filled. The shape of the nozzle in the mixing head is critical to improve the quality of polyurethane. To achieve homogeneous mixing, an intensive turbulence energy in the mixing nozzle is essential. In this study, a mixing nozzle for RIM was designed, and mixing efficiency was investigated based on experiment. Experiments were conducted with different combinations of nozzle tips and exit diameter to measure the mixing efficiency by measuring jet force and investigating mixing image with high speed camera. Jet force increased gradually and reaches steady state conditions. The jet force depended on shape of nozzle tip and outlet sizes. These results suggest that optimized nozzle configurations are necessary for high efficiency mixing with RIM.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.93-99
• /
• 2016

The trimming process is required for satisfying the dimensions of a final product in the hot stamping process. In general, the mechanical trimming or laser trimming process is applied after hot stamping. However, these processes have several disadvantages such as short tool life and low productivity. Therefore, in this study, the optimal trimless blank shape for the hot stamping process of a sill side was designed to remove the trimming process after hot stamping. In order to design the trimless blank, numerical analysis was performed. Firstly, CFD analysis was carried out to predict the cooling temperature and holding time of the hot stamping process. Then, the optimal trimless blank shape was determined through FE analysis. The effectiveness of the designed trimless blank shape was verified through a hot stamping experiment at an actual industrial site.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.30-35
• /
• 2014

According to weight lightning trend of automobile body, necessity of resistance spot welding (RSW) of Mg alloy on automobile industry is increasing rapidly because of the highest specific strength among commercial metals. Mg alloy has low electric resistance and high thermal conductivity like as Al alloy, so that needs applying high current in short time when welding. Thick oxide film of Mg alloy pollutes the electrodes and makes partial current carrying paths when on welding. Partial current carrying paths signify excessive concentration of current. There can initiate expulsion easily and reduces electrode life rapidly. Generating partial current carrying paths and expulsions are influenced by shapes of electrode. Therefore, electrode life also influenced by shape. In this study, we perform life test of RSW electrode of radius type. Measure tensile shear load and nugget size every spot alternately. As a result, radius type electrode can extend life over twice as dome type electrode.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.16-21
• /
• 2017

In this paper, the effect of battery-package shape of electric vehicle on the forced convection around a group of battery cells has been numerically investigated. Simulations for the two package shapes with straight/curved ducts have been conducted to examine the two design factors; the maximum temperature and the temperature deviation of a group of cells which influence the cell durability. The simulation of the conjugate heat transfer has been simplified by employing an equivalent thermal conductivity of cell that consists of various materials. It has been found that the maximum temperature and the temperature deviation of curved duct were lower than those of straight duct. Velocity fields have also been examined to describe the temperature distribution of a group of cells and the position of maximum temperature was found to be related to the dead zone of flow field.