• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.93-100
• /
• 1998

The basic systems of spatial structures such as shells, membrane, cable-nets and tensegrity structure have been developed to create the large spaces without column. These structures may have large freedom in scale and form, and especially tensegrity structures are received much attention from the view points of their light weight and aesthetics. But There re some difficulties concerning structural stability, surface formation and construction method. One of the way to solve these problems reasonably is a combination of tensile members and rigid members. A structural system based on this concept is referred to as the "HTS ( Hybrid Tension Structure )". This is a type of flexible structural system which is unstable initially, because the cable material has little initial rigidity. As cable - dome hybrid structures is a type of HTS, the initial stress for the self- equilibrated system having stable state have to be introduced. To determine initial stress having stable state, the shape finding analysis is required before the stress - deformation analysis. In this paper, the primary objective is to derive the nonlinear finite element formula of cable and truss members considering geometric nonlinearity for shape finding of cable-dome, and to propose the method to decide the initial stress by the shape analysis of cable-dome hybrid structure with the self-equilibrated state.

• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.304-309
• /
• 2008

Magnesium alloys containing $Mg_2Si$ particles, as a promising cheap heat-resistant magnesium alloy for automobile power train parts applications, are attracting more attention of both material scientists and design engineers. Modification of the Chinese script shape $Mg_2Si$ particle is a key for using this alloy in sand or permanent mould casting. In the present work, the modification effect of Sr and Sb on the corrosion properties of the Mg-5Al-2Si alloy was investigated. Sr or Sb addition promoted the formation of fine polygonal shape $Mg_2Si$ particles by providing the nucleation sites. Sr was more effective element than Sb for shape modification of Chinese script shape $Mg_2Si$. Such improved microstructure of the modified alloy resulted in large improvement in corrosion resistance as compared to unmodified Mg-5Al-2Si alloy.

• Corrosion Science and Technology
• /
• v.22 no.1
• /
• pp.64-72
• /
• 2023

Ni-Ti shape memory alloy for dental nerve treatment devices was prepared by adding Mo to Ni-Ti alloy to improve flexibility and fatigue fracture characteristics and simultaneously increase corrosion resistance. Surface properties of the alloy were evaluated. Microstructure analysis of the Ni-Ti-xMo alloy revealed that the amount of needle-like structure increased with increasing Mo content. The shape of the precipitate showed a pattern in which a long needle-like structure gradually disappeared and changed into a small spherical shape. As a result of XRD analysis of the Ni-Ti-xMo alloy, R-phase structure appeared as Mo was added. R-phase and B2 structure were mainly observed. As a result of DSC analysis, phase transformation of the Ti-Ni-Mo alloy showed a two-step phase change of B2-R-B19' transformation with two exothermic peaks and one endothermic peak. As Mo content increased, R-phase formation temperature gradually decreased. As a result of measuring surface hardness of the Ti-Ni-Mo alloy, change in hardness value due to the phase change tended to decrease with increasing Mo content. As a result of the corrosion test, the corrosion potential and pitting potential increased while the current density tended to decrease with increasing Mo content.

• Journal of Powder Materials
• /
• v.31 no.1
• /
• pp.37-42
• /
• 2024

Friction stir spot welding (FSSW) is a solid-state joining process and a rapidly growing dissimilar material welding technology for joining metallic alloys in the automotive industry. Welding tool shape and process conditions must be appropriately controlled to obtain high bonding characteristics. In this study, FSSW is performed on dissimilar materials AA5052-H32 aluminum alloy sheet and SPRC440 steel sheet, and the influence of the shape of joining tool and tool insertion depth during joining is investigated. A new intermetallic compound is produced at the aluminum and steel sheets joint. When the insertion depth of the tool is insufficient, the intermetallic compound between the two sheets did not form uniformly. As the insertion depth increased, the intermetallic compound layer become uniform and continuous. The joint specimen shows higher values of tensile shear load as the diameter and insertion depth of the tool increase. This shows that the uniform formation of the intermetallic compound strengthens the bonding force between the joining specimens and increases the tensile shear load.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.311-315
• /
• 1991

The formation and transition of 2212 and 2223 phase have been studied in BPSCCO system. The 2212 phase formed in early sintering state reacts on $Ca_2PbO_4,\;Ca_2CuO_3$ and CuO during sintering process and thus produces the 2223 phase. A long sintering period is need to fabricate the superconductor with large volume fraction of 2223 phase. Also, the thin plate-like grains composed of Bi, Sr, Ca and Cu contribute to 2223 phase formation. Though the sample has lower volume fraction of 2223 phase, the critical temperature is measured highly in case of the grain grown to plate-like shape. In this work, the critical temperature of the sample sintered for 264 hr in air was measured 108 K. Microstructure of the sample was varied with condition of heat treatment after sintering process and the sample annealed with $500^{\circ}C$ for 5 hr showed excellent charateristics of 2223 phase formation.

• The Plant Pathology Journal
• /
• v.18 no.1
• /
• pp.43-49
• /
• 2002

Direct effects of atmospheric ozone on conidia of the rice blast pathogen, Magnaporthe grisea, were investigated to evaluate ozone-induced effects on infection potential of the rice blast fungus. Acute ozone exposure (200 nl $1^{-1}$, 8 h $day^{-1}$3 days) during sporulation significantly affected conidial morphology, appressorium formation, and disease development on rice loaves. Ozone caused reduction in conidial size and change in conidial shape. Relative cytoplasmic volume of lipids and vacuoles were increased in ozone-exposed conidia. Inhibition of appressorium formation and simultaneous increase in endogenous levee of polyamines were found in ozone-exposed conidia. The inverse relationship between appressorium formation and level of polyamines implies that ozone-mediated increase in intracellular level of polyamines may inhibit appressorium formation in rice blast fungus. Furthermore, rice plants inoculated with ozone-fumigated conidia exhibited less severe disease development than those with unfumigated conidia. This result suggests that the anti-conidial consequence of acute ozone will eventually weaken the rice blasts potential for multiple infection cycle. This further suggests that consequently, rice blast can be transformed from an explosive disease to one that has limited epidemiological potential in the field.

• Archives of Craniofacial Surgery
• /
• v.19 no.1
• /
• pp.79-82
• /
• 2018

Formation of an ideally-shaped tragus remains one of the most challenging issues during staged tragus reconstruction in microtia patients. The authors describe a new method used to treat a unique case of concha-type microtia in which the 10-year-old male patient had only a portion of pre-existing cartilage at the tragus site. An anomalous skin lump was also present. During the initial stages of the reconstruction, the two-stage Nagata method was used for surgical correction of the microtia. An autologous rib cartilage graft was used to form the ear framework. A temporoparietal fascia flap was also constructed. Remnant skin tags and anomalous cartilage that accompany microtia are usually removed during microtia repair. However, the cartilage and skin lump were preserved during the reconstruction. The skin lump was later used to form a vascularized chondrocutaneous island flap that supplemented the portion of cartilage during tragus formation. The result was a new tragus that was satisfactorily improved in both size and shape. Patients with concha-type microtia may benefit from the use of this new method for tragus formation.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.55-62
• /
• 2001

This paper describes about the formation of methane hydrate that is artificially made in jacket-type stirred reactor and is observed the change of hydrate shape during the course of reaction. The combustion of manufactured methane hydrate is showed the probability of a storage and transport of gas. And the influence of various experimental conditions of temperature, pressure and stirring rate on the manufacture of methane hydrate is measured. The growth rate and the induction time of methane hydrate is observed according to the conditions. Especially it is important to investigate the effect of temperature and pressure on the growth of hydrate such as the nuclear creation and the structure formation of hydrate in order to study the storage and transport of gas.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.53-61
• /
• 1996

A clear understanding of the surface formation mechanism due to cutting is very important to help produce a good quality surface. Much of the roughness along the length of a bar being cut in a lathe can be explained in terms of macroscopic tool shape and feed rate. However, the roughness along the direction of cutting requires a different explanation. The formation of surface roughness is a problem in flow and fracture of materials in the vicinity of the tool edge. On a microscopic scale the cutting edge is rounded because it is impossible to grind a perfectly sharp cutting edge. Even if a perfectly sharp cutting edge were obtained it would soon become dull as a result of rapid breakdown and wear of the cutting edge. A research project is proposed in which in the main object is to model the surface formation mechanism due to cutting. The tool was assumed to be dull, that is, its edge has a finite radius. In order to study the effect of the radius of cutting edge on the surface formation, tools having different cutting edges were used. For orthogonal cutting experiment, cast iron and glass were chosen as brittle materials. Plowing forces acting in the cutting edge were estimated and its effect on the surface roughness was studied by observing the machined surface using optical microscope.

• Journal of Korean Society on Water Environment
• /
• v.22 no.5
• /
• pp.851-855
• /
• 2006

The aim of this study was to investigate characteristics of formation of mixed oxidants and some aspects of the performance of electrochemical process as an alternative disinfection strategy for water purification. The study of electrochemical process has shown free chlorine to be produced, but smaller amounts of stronger oxidants, such as ozone, hydrogen peroxide and OH radicals, were also generated. The formation of ozone and hydrogen peroxide increased with increasing electric conductivity, but was limited at conductivities greater than 0.6 mS/cm. Also, formation of OH radical was enhanced as electric conductivity was increased to 0.9 mS/cm and The stead-state concentrations of OH radical were calculated at $1.1{\sim}6.4{\times}10^{-14}M$. Using E. coti, inactivation kinetic studies were performed. With the exception of free chlorine, the role of mixed oxidants, especially OH radical, was investigated for enhancement of the inactivation rate.