• 제목/요약/키워드: shape extraction

검색결과 571건 처리시간 0.035초

쌀 식미 및 가공적성에 관련된 이화학적 특성 (Physicochemical Characteristics and Varietal Improvement Related to Palatability of Cooked Rice or Suitability to Food Processing in Rice)

  • 최해춘
    • 한국식품영양학회:학술대회논문집
    • /
    • 한국식품영양학회 2001년도 동계 학술심포지움
    • /
    • pp.39-74
    • /
    • 2001
  • The endeavors enhancing the grain quality of high-yielding japonica rice were steadily continued during 1980s∼1990s along with the self-sufficiency of rice production and the increasing demands of high-quality rices. During this time, considerably great, progress and success was obtained in development of high-quality japonica cultivars and qualify evaluation techniques including the elucidation of interrelationship between the physicochemical properties of rice grain and the physical or palatability components of cooked rice. In 1990s, some high-quality japonica rice caltivars and special rices adaptable for food processing such as large kernel, chalky endosperm aromatic and colored rices were developed and its objective preference and utility was also examined by a palatability meter, rapid-visco analyzer and texture analyzer. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice and the palatability of cooked rice. The water/rice ratio (in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was average to 2.63(in v/v basis). The major physicochemical components of rice grain associated with the palatability of cooked rice were examined using japonica rice materials showing narrow varietal variation in grain size and shape, alkali digestibility, gel consistency, amylose and protein contents, but considerable difference in appearance and torture of cooked rice. The glossiness or gross palatability score of cooked rice were closely associated with the peak. hot paste and consistency viscosities of viscogram with year difference. The high-quality rice variety “Ilpumbyeo” showed less portion of amylose on the outer layer of milled rice grain and less and slower change in iodine blue value of extracted paste during twenty minutes of boiling. This highly palatable rice also exhibited very fine net structure in outer layer and fine-spongy and well-swollen shape of gelatinized starch granules in inner layer and core of cooked rice kernel compared with the poor palatable rice through image of scanning electronic mcroscope. Gross sensory score of cooked rice could be estimated by multiple linear regression formula, deduced from relationship between rice quality components mentioned above and eating quality of cooked rice, with high Probability of determination. The ${\alpha}$ -amylose-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, shelved the relatively fast deterioration of cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogiadation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked rice. The softer gel consistency and lower amylose content in milled rice revealed the higher ratio of popped rice and larger bulk density of popping. The stronger hardness of rice grain showed relatively higher ratio of popping and the more chalky or less translucent rice exhibited the lower ratio of intact popped brown rice. The potassium and magnesium contents of milled rice were negatively associated with gross score of noodle making mixed with wheat flour in half and the better rice for noodle making revealed relatively less amount of solid extraction during boiling. The more volume expansion of batters for making brown rice bread resulted the better loaf formation and more springiness in rice bread. The higher protein rices produced relatively the more moist white rice bread. The springiness of rice bread was also significantly correlated with high amylose content and hard gel consistency. The completely chalky and large gram rices showed better suitability for fermentation and brewing. Our breeding efforts on rice quality improvement for the future should focus on enhancement of palatability of cooked rice and marketing qualify as well as the diversification in morphological and physicochemical characteristics of rice grain for various value-added rice food processings.

  • PDF

KOMPSAT-3 위성영상 기반 양식시설물 자동 검출 프로토타입 시스템 개발 (Development of a Prototype System for Aquaculture Facility Auto Detection Using KOMPSAT-3 Satellite Imagery)

  • 김도령;김형훈;김우현;류동하;강수명;정윤재
    • 한국지리정보학회지
    • /
    • 제19권4호
    • /
    • pp.63-75
    • /
    • 2016
  • 우리나라에서는 삼면이 바다와 접해있는 반도형태의 국가로 과거부터 해양수산물에 대한 양식이 이루어져 왔다. 최근에는 양식시설물들을 체계적으로 관리하기 위해 생산량에 대한 조사하고 있으며, 조사된 자료를 기반으로 생산물에 대한 가격책정을 수행하여 내수 어족자원을 안정화하고 어민생활권을 보장하고 있다. 이러한 양식시설물의 조사는 매년 항공사진 기반의 수동 디지타이징을 기반으로 하고 있다. 고해상도의 항공사진을 활용한 수동 디지타이징은 양식시설물 별 종류에 따른 특징과 시설물 운용 여부 등을 알고 있는 전문가의 지식을 기반으로 하여 정확한 구획이 수행된다. 그러나 항공사진의 활용은 생육주기가 다른 양식자원들을 모니터링하기에는 경제적, 시간적 한계가 있으며, 전문가의 지식기반 구획 역시 다수의 전문 인력 등이 투입되어야 한다. 그러므로 본 연구에서는 관측 대상지에 대한 대단위 모니터링이 가능한 위성영상을 바탕으로 양식장에 대한 외곽정보 자동으로 검출하는 프로토타입 시스템 개발에 대해 연구하였다. 연구에 사용되는 위성영상은 국내 고해상 위성인 KOMPSAT-3 위성영상 13 Scene을 양식시설이 주로 이용되는 10월에서 4월 사이에 신규 촬영하여 사용하였다. 양식시설의 검출은 가두리식, 연승식, 부류식 양식시설을 검출하였으며 검출 방법은 영상 처리를 통한 ANN 분류기법 및 Polygon 생성기법을 사용하였다. 개발된 프로토타입 시스템의 양식시설 검출율은 약 93% 정도로 나타났다. 위성영상 기반의 양식시설물 외곽정보 검출은 기존 항공사진이 가지는 모니터링의 한계를 개선할 수 있을 뿐만 아니라, 전문가가 양식시설을 탐지하고 판독하는 데 있어 유용하게 지원될 수 있을 것이다. 향후 양식장 시설물별 분류 및 영상 처리 기법의 적용을 통해 양식장 시설물 검출 시스템이 개발되어야 할 것이며, 해당 시스템을 통해 양식시설물 모니터링을 수행하여 관련 의사결정 지원에 도움이 될 수 있을 것으로 판단된다.

아말감의 구강내 부식 및 인공 부식에 관한 연구 (A STUDY ON IN VIVO AND IN VITRO AMALGAM CORROSION)

  • 임병목;권혁춘;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.1-33
    • /
    • 1997
  • The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

  • PDF

구강 외 노출시간에 따른 흰쥐 치아 치주인대세포 활성도의 MTT 검색법을 이용한 평가 (EVALUATION OF PERIODONTAL LIGAMENT CELL VIABILITY IN RAT TEETH ACCORDING TO VARIOUS EXTRA-ORAL DRY STORAGE TIMES USING MTT ASSAY)

  • 전인수;김의성;김진;이승종
    • Restorative Dentistry and Endodontics
    • /
    • 제31권5호
    • /
    • pp.398-408
    • /
    • 2006
  • 본 연구의 목적은 MTT 검색법을 이용하여 흰쥐 상악 대구치를 발거한 후 실온의 건조 상태에서의 시간 변화에 따른 쥐 치아 치근면의 치주인대 세포 활성도를 측정함과 동시에 냉동 절단법을 이용한 조직학적인 관찰 결과를 토대로 하여 MTT 검색법이 유용한지를 검증하고자 하였다. 생후 4주된 암컷 Sprague-Dawley계 흰쥐 80마리를 이용하여 ${\beta}$-APN 전처치 후 상악 제 1 & 2대구치를 모두 발거하였다. 이들 치아를 즉시 혹은 10, 20, 40, 60분 동안 실온에서 건조시킨 후 치아 자체를 MTT용액에 저장한 다음 흡광도 측정을 이용한 정량적 분석과 동시에 냉동 절단법을 이용하여 조직을 관찰하였다. MTT 검색에 의한 흡광도 값에 있어 즉시 처치군과 10분 건조군 사이에는 통계학적인 유의차가 없었다 (p > 0.05). 그러나, 즉시 처치군 및 10분 건조군은 20분과 40분 및 60분 건조군과 비교시 통계학적인 유의차를 보였다 (p <0.05). 또한, 20분 건조군도 40분 및 60분 건조군과의 군간 비교에서 각각 통계학적인 유의차를 보였다 (p<0.05). 그러나, 40분 건조군과 60분 건조군 사이에는 통계학적인 유의차를 보이지 않았다. 조직학적 관찰에서 시간경과에 따라 crystal의 모양과 분포 및 수에서 확연히 구별되는 특징적인 양상을 보여주었다. 즉시 및 10분 건조 군에서는 가시모양의 crystal이 전치주인대 부위 조직과 치수 내에 밀도 높게 골고루 폭넓게 퍼져 있었으나 20분 이상 건조 군에서부터는 치주인대와 치수 부위 조직 모두에서 crystal 결정체 수가 급격히 감소하는 양상을 보였다. 이번 실험의 결과를 종합적으로 분석해보면 MTT 흡광도 측정값과 냉동 절단법을 이용한 시편의 MTT 염색 관찰 소견 결과를 서로 비교했을 때 상당히 밀접한 상관 관계가 있음을 보였다.

상악동 아래벽과 상악 대구치 치근사이 위치관계에 관한 방사선학적 연구 (A Radiologic Study of the Relationship of the Maxillary Sinus Floor and Apex of the Maxillary Molar)

  • 윤혜림;박창서
    • 치과방사선
    • /
    • 제28권1호
    • /
    • pp.111-126
    • /
    • 1998
  • In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5% of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

  • PDF

송천광산의 풍화광미 내 중금속 및 비소 거동 특성 (Characterization on the Behavior of Heavy Metals and Arsenic in the Weathered Tailings of Songcheon Mine)

  • 이우춘;김영호;조현구;김순오
    • 한국광물학회지
    • /
    • 제23권2호
    • /
    • pp.125-139
    • /
    • 2010
  • 광물학적 지구화학적 방법을 이용하여 송천 금은광산 광미 내 중금속 및 비소의 거동특성에 대해 연구하였다. 광미 내 광물조성은 X-선 회절분석, 에너지 분산분광분석, 전자탐침미세현미분석(EPMA)을 이용하여 조사하였고, 중금속과 비소의 농도와 화학적 존재형태는 각각 왕수분해법과 연속추출법으로 분석하였다. 광물학적 연구결과, 방연석, 섬아연석, 황철석, 석영, 그리고 스코로다이트로 구성된 수지상 광물집합체가 관찰되었으며, 특히 스코로다이트는 기질의 형태로 나타났다. 이러한 광물집합체 내 다양한 황화광물의 풍화반응 정도를 평가하고자 EPMA 분석을 실시하였으며 그 결과, 유비철석, 방연석, 섬아연석, 황철석 순으로 풍화반응성이 높은 것으로 평가되었다. 방연석의 풍화는 이차광물로 이루어진 누대구조가 특징적으로 관찰되었으며, 이러한 누대구조에서 다량의 앵글레사이트와 소량의 보이단타이트를 관찰하였다. 그리고 유비철석은 거의 모두 스코로다이트로 변질되어 스코로다이트가 기질의 형태로 존재하였으며 이러한 기질 내에서 유비철석보다 풍화반응성이 떨어지는 방연석, 섬아연석, 황철석 등이 관찰되었다. 유비철석으로부터 스코로다이트로 변질되는 과정 중 일부 비소는 용출되어 주변 환경에 악영향을 끼쳤을 것으로 판단된다. EPMA 정량분석결과로 볼 때, 이러한 스코로다이트는 안정도가 비교적 높음을 알 수 있었으며, 또한 안정한 스코로다이트는 광미를 피복하여 광미 내 다른 일차광물들의 풍화를 억제하는 것으로 생각된다. 이러한 원인으로 송천광미가 지표환경에 장기간 노출되었음에도 불구하고 초기 풍화진행단계의 특성을 보이는 것으로 판단된다. 본 연구의 광물학적, 지구화학적 연구결과를 종합해보면 현재 납과 비소가 이동성이 높은 형태로 존재하기 때문에 광미가 지표에 계속 노출되어 풍화반응이 지속된다면 그러한 유해원소들의 용출 가능성이 클 뿐만 아니라 스코로다이트의 안정도가 감소하여 비소의 재용출 가능성도 높아 송천광산의 환경위해성이 큰 것으로 판단된다.

부여 응평리 출토 백제 사비기 인골 보존처리 및 과학적 분석 (Conservation and Scientific Analysis of Human Bone Excavated in Sabi Period of Baekje from Eungpyeong-ri, Buyeo)

  • 김미정;이윤섭;조은민;박수진;문민성
    • 헤리티지:역사와 과학
    • /
    • 제55권1호
    • /
    • pp.305-321
    • /
    • 2022
  • 부여 응평리 석실묘는 두 개체를 합장한 형태로 피장자 간의 상관관계 및 석실묘의 성격에 대해 조사하였다. 부여 응평리 석실묘는 지리적 입지·공반유물·출토인골을 통해 백제 사비기에 위계가 있는 도성민 혹은 지방관료로 추정할수 있었다. 본 연구는 인골 특성에 적합한 수습 및 보존처리와 함께 과학적 분석을 수행한 결과이다. 현장에서 출토되는 인골 수습에서 가장 중요한 사항은 과학적 분석용 시료를 제외한 잔존 뼈들에 대한 강화제의 종류와 농도이다. 부여 응평리 인골의 경우 paraloid B-72를 사용하였으며 현장에서 강화 처리 시 사용했던 약품을 동일하게 사용하여 표면의 이물질 제거·강화·접합 등 최소한의 보존처리를 수행하였다. 토양의 영향으로 인골의 외부 형태 식별이 어려운 경우 X-ray와 CT촬영 자료를 활용하였다. 안정동위원소와 DNA분석을 수행하기 앞서 근적외선 분석을 진행하였으며 그 결과를 토대로 시료 채취 부위를 선정하였다. 인골의 콜라겐을 이용하는 탄소·질소 안정동위원소 분석의 경우 콜라겐의 수율이 3.8~6.1%로 나타났으며 안정동위원소비는 EBW, EBE 개체 각각 δ13C -18.3‰±0.1‰, -19.0‰±0.1‰이고, δ15N 10.7‰±0.5‰, 10.6‰±0.1‰로 확인되었다. 두 개체는 C3 식물을 위주로 약간의 잡곡류를 함께 섭취했고, 단백질은 육상 동물로부터 공급되었을 것으로 판단된다. 또한 두 개체의 데이터 편차가 근소하여 유사한 식이를 하였을 것으로 추정된다. DNA 분석의 경우 증폭이 불가능하여 결과를 얻기 어려웠으며 이는 시료의 보존상태 등을 연관 지어 보았을 때 DNA가 극미량으로 잔존하여 증폭에 어려움이 있었을 것으로 생각된다. 부여 응평리 유적 석실묘에서 출토된 인골의 경우 안정동위원소분석 및 DNA 분석과 근적외선 분석의 연관성은 도출하기 어려웠으며 뼈의 보존상태 평가를 위한 추가 분석이 필요할 것으로 사료된다.

TanDEM-X DEM을 이용한 강화도 갯벌 조류로 추출과 분석 (Extraction and Analysis of Ganghwa Tidal Flat Channels Using TanDEM-X DEM)

  • 윤가람;김린;김남영;김나경;장윤영;최영진;이승국
    • 지질공학
    • /
    • 제32권3호
    • /
    • pp.411-420
    • /
    • 2022
  • 최근 환경, 과학, 사회 등 다양한 분야에서 원격 탐사를 활용한 연구가 활발해지고 있다. 원격탐사를 활용한 연구의 결과가 수치적인 결과뿐만 아니라 사회 및 과학적 문제 해결과 예방하는데 있어 중요한 역할을 하고 있다. 이 논문은 갯벌 환경을 대상으로 원격탐사 기술을 활용하여 제공되는 데이터와 각 데이터의 연관성을 말하고자 하는데 목적을 두고 있다. 원격 탐사 중 인공위성을 활용한 고해상도 데이터를 얻어 갯벌 조류로에 대한 정보를 알아보고자 한다. 침식과 퇴적, 간조, 만조 등의 원인으로 생성되는 갯벌의 조류로는 갯벌 경사에 대한 정보와 생태계에 대한 정보를 내재하고 있다. 따라서 갯벌의 전체적인 조류로를 분석하는 것은 매우 중요한 연구 중에 하나라고 볼 수 있다. 본 논문은 TanDEM-X를 통해 DEM(Digital Elevation Model, 수치표고모델)을 생성하며, DEM은 조류로를 생성하는데 가장 기본적인 데이터로 활용이 된다. 이번 연구 지역은 강화도 갯벌로 서해안 중부에 위치한 갯벌이다. 연구 결과로 생성된 조류로를 분석해보면 강화도 갯벌의 경사 방향과 조류로의 형태 등 다양한 정보를 파악 할 수 있다. 또한 갯벌의 입도분포, 경사도, 밀도도 등의 데이터와 본 연구에서 추출한 조류로와의 연관성이 높은 점을 고려하여 해당 연구의 결과가 앞으로 갯벌 연구에 DEM 데이터의 활용에 대한 중요성과 필요성이 높아지고 양질의 결과를 얻을 수 있다라는 기대를 가져본다.

덴던 비파괴평가를 위한 Total Flux Leakage에서 높은 측정빈도의 데이터를 획득하기 위한 진폭복조의 응용 (Application of Amplitude Demodulation to Acquire High-sampling Data of Total Flux Leakage for Tendon Nondestructive Estimation )

  • 이주형;곽임종;조창빈;최지영;박광연
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권2호
    • /
    • pp.17-24
    • /
    • 2023
  • 이 논문은 total flux leakage (TFL) 방법을 이용해 외부텐던을 비파괴검사 하는 솔레노이드 형태의 센서의 측정 신호를 후처리하는 방법을 소개한다. 기존에 개발된 TFL 솔레노이드 센서는 1차 코일과 2차 코일로 이루어져 1차 코일에 정현파 형태의 교류를 입력하면 2차 코일에 그 미분에 비례하는 신호가 측정된다. 이때 진폭은 텐던의 단면에 비례하므로 파단 및 부식 여부를 확인할 수 있다. 따라서 TFL센서의 측정신호에서 진폭정보를 추출 하는 것이 중요한데 기존에는 단순히 극댓값을 모아 진폭정보를 취득했다. 하지만 이 방법을 사용하면 측정빈도가 크게 낮아져 추가적인 신호처리 및 인공지능 적용에 많은 제약이 생긴다. 이 논문은 높은 측정빈도를 가진 진폭정보를 추출하기 위해 진폭복조를 응용해 진폭정보를 획득하는 방법을 제시한다. 진폭복조를 이용해 진폭정보를 취득하면 측정빈도를 원시신호와 동일한 수준으로 유지할 수 있다. 이 방법은 TFL센서의 1차 코일 입력 주파수 선택과 센서를 외부텐던에 적용하는 속도 등에 제약을 없애주어 개발 방향에 많은 자유도를 부여한다. 또한 높은 측정빈도를 유지하므로 추가적인 신호처리나 인공지능 등을 활용 하는데 유리함을 제공한다. 제안된 방법은 실내실험을 통해 검증 되었으며 기존 방법과 비교해 어떤 장점이 있는지 분석했다. 제시된 예제의 경우 진폭복조를 사용한 방법이 기존 방법에 비해 100배 높은 측정빈도를 제공 하는 것을 확인 할 수 있었다. 주어진 상황과 구체적인 장비 설정에 따라 차이가 있겠지만 대부분의 경우 진폭복조를 사용해 진폭정보를 추출하면 기존 방법 대비 만족할만한 결과를 얻을 수 있을 것이다.

쌀 품질 고급화 및 고부가가치화를 위한 육종현황과 전망 (Current Status and Perspectives in Varietal Improvement of Rice Cultivars for High-Quality and Value-Added Products)

  • 최해춘
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.15-32
    • /
    • 2002
  • 1980-'90년대에 쌀의 자급생산이 지속되고 생활수준 향상에 따른 양질미 수요가 점증되면서 자포니카 다수성 품종의 미질 개선에 힘을 크게 기울이게 되었고 식미향상을 위한 육종연구 와 효율적 평가 기술개발 연구에 박차를 가하게 되어 쌀의 이화학적 특성과 식미 및 밥 물리성간 상관과 식미의 객관적 평가방법 개발, 양식미 쌀 및 가공적성 특수미 개발 등 그 동안 많은 연구성과를 올리게 되었다. 1990년대에 밥맛이 매우 좋은 고품질 자포니카 품종과 대립, 심백미, 향미, 유색미 등 가공용 특수미 품종을 개발 보급하였고 식미와 용도에 대하여 식미검정계, 신속점도측정계 및 texture 분석계 등을 이용하여 검토하였다. 최근에는 아밀로스 함량이 9%로 찹쌀과 맵쌀의 중간 성질을 가진 중간찰 품종인 '백진주벼'와 배유가 보얀 멥쌀인 '설갱 벼'를 비롯하여 라이신 함량이 높은 '영안벼' 육성하여 쌀의 가공 이용성과 기능성을 한층 높혀 놓았다. 식미와 여러 가지 미질 특성간 관련성에 관한 연구 결과를 요약해 보면 다음과 같다. 쌀의 상온흡수율 및 최대흡수율은 K/Mg율 및 알칼리 붕괴도와 유의한 부의 상관성을 나타내었으며 가열흡수율이 높은 품종일수록 밥의 용적팽창률이 컸다. 수분함량이 낮은 경질인 쌀일수록 침지 20분 후의 상온흡수율과 최대흡수율이 더 높은 경향이었으며 이러한 흡수 특성은 쌀 단백질 함량이나 아밀로스 함량 및 식미와는 유의한 상관성이 없었다 취반 적정가수량은 품종에 따라 마른 쌀 무게의 1.45-l.61배의 변이를 나타내었고 평균은 1.52배였으며 알맞게 취사된 밥의 부피는 평균 쌀 부피의 2.63배가되었다. 쌀 형태, 알칼리붕괴도, 호응집성, 아밀로스 및 단백질 함량은 거의 비슷하지만 식미에 차이가 있는 자포니카 품종들을 사용하여 식미와 관련된 쌀의 이화학적 특성을 검토한 결과, 밥의 윤기와 식미 총평은 생산 연도에 따라 호화점도 특성 중 최고점도, 최저점도 및 응집점도와 밀접한 관계를 나타내었다. 밥맛이 가장 좋은 일품 벼는 쌀의 외층에 아밀로스 함량 분포가 낮고 쌀을 열탕에 담근 20분간 우러난 용출액의 요드 정색도가 낮고 증가정도도 완만하였다. 일품 벼는 밥맛이 떨어지는 동해 벼에 비해 밥알 횡단면의 주사형 전자현미경 사진에서 밥알 외층의 호화전분의 그 물망이 매우 치밀하고 속층의 전분립의 호화정도가 양호하였다. 식미총평은 식미관련 이화학적 특성과의 관계를 이용한 중회귀식에 의해 매우 높은 결정계수로 추정이 가능하였다. 밥노화의 품종간 차이는 α-amylase-iodine 법으로 비교할 수 있었는데 노화정도가 적었던 품종은 일품벼, 추청벼, 사사니시끼, 진부벼 및 고시히까리였다. 통일형 품종인 태백벼와 자포니카 품종 중 섬진벼가 비교적 밥노화가 빨랐다 일반적으로 밥맛이 좋은 품종이 밥의 노화정도가 느렸으며 찬밥의 탄력성이 큰 경향이었다. 또한 밥노화가 느렸던 품종은 최저점도가 높았고 최종점도가 낮았다 찬밥의 탄력성은 쌀의 마그네슘함량과 밥의 용적팽창률과 밀접한 관계를 나타내었다. 식은밥의 더운밥 대비 경도 변화율은 취반용출액의 고형물량과 취반용적 팽창률과 부의 상관을 나타내었다. 식미관련 주요 이화학적 특성은 밥의 노화와도 직접 간접으로 상관이 있는 것으로 평가되었다. 쌀의 여러 가지 식품 가공적성과 관련된 형태 및 이화학적 특성은 가공식품 종류에 따라 매우 다르다. 쌀 튀김성은 호응집성이 연질이거나 아밀로스 함량이 낮을수록 양호하며 지질함량이나 단백질 함량이 높으면 좋지 않은 경향이다. 심복백정도가 심할수록 튀김현미 정립률이 떨어지며 현미 강도가 높을수록 튀김률은 높은 경향이었다 쌀국수는 밀가루와 50% 혼합시에 쌀의 칼륨 및 마그네슘 함량이 높은 품종일수록 제면 총평이 낮은 경향이었고 제면이 양호한 것이 국수물의 용출고형 물량이 적은 경향이었다. 쌀빵 가공적성은 품종에 따라서 현미와 백미간에 현저한 차이를 나타내는 것이 있는데 현미에서 반죽의 부피 증가율이 큰 쌀일수록 푹신한 감이 있는 쌀방 제조가 가능하였으며 백미에서 단백질 함량이 높은 품종일수록 쌀빵이 더욱 촉촉한 느낌이 있는 경향이었다. 아밀로스 함량이 높고 호응집성이 경질인 쌀일수록 쌀빵의 탄력성이 더 높은 경향이었다. 쌀의 발효 및 양조적성은 심복백이 심한 쌀이나 새로운 돌연변이인 뽀얀 멥쌀이 홍국균이나 홍국균의 균사활착 밀도가 높고 당화 효소 역가도 높은 경향이었으며 쌀알이 대립이면서 단백질 함량이 낮은 쪽이 양조에 유리한 것으로 알려져 있다. 찰벼 품종도 여러 가지 이화학적 특성과 전분구조 특성의 차이에 따라 9개의 품종군으로 나누어 볼 수 있을 만큼 품종적 변이가 크며 이들 이화학적 및 구조적 특성간에 상호 밀접한 연관성을 나타내었으며 유과·인절미·식혜ㆍ미숫가루 등에 상당한 가공적성의 차이를 보였다. WTO 체제 출범이후 생산비와 가격 면에서 경쟁력이 약한 우리 쌀이 살아남기 위해서는 품질의 고급화와 쌀 가공식품의 다양화 및 고기능성 개발을 추구할 수밖에 없다. 따라서 이와 같은 노력은 벼 품종개발만으로 소기의 성과를 올리기 어렵고 쌀 식품의 고급화 및 다양화를 위한 여러 분야의 긴밀한 연구협력이 수반되지 않으면 안 된다.