• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.197-204
• /
• 2019

In this study, smart farm technology was used by farmers cultivating 'CHIKUMASSHU T-011' in order to develop an optimal growth model for the precision cultivation of bottle-grown winter mushroom and the results of the same are mentioned herein. Farmers participating in the experiment used 60 ㎡ of bed area with 4 rows and 13 columns of shelf shape, 20 horsepower refrigerator, 100T of sandwich panel for insulation, 6 ultrasonic humidifiers, 12 kW of heating, and 20,000 bottles of Flammulina velutipes mushroom spores. The temperature, humidity, and carbon dioxide concentrations, which directly affect the growth of the mushroom, were collected and analyzed from the environmental sensors installed at the winter mushroom cultivation area. The initial temperature was found to be 14.5℃, which was maintained at 14℃ to 15℃ until the 10th day. In the restriction phase, the initial temperature was 4℃ and was maintained between 2℃ and 3℃ until the 15th day, while during the growth phase, it was maintained between 7.5℃ to 9.5℃. Analysis of the humidity data revealed initial humidity to be 100%, which varied between 88% to 98% during primordia formation period. The humidity remained between 77% to 96% until the 15th day, in the restriction phase and between 75% to 83% during the growth phase. The initial carbon dioxide concentration was 3,500 ppm and varied between 3,500 ppm to 6,000 ppm during primordia formation period and was maintained at 6,000 ppm until the 15th day. During the growth phase, the carbon dioxide concentration was found to be over 6,000 ppm. Fruiting body characteristics of 'CHIKUMASSHU T-011' cultivated in the farmhouse were as follows: Pileus diameter of 7.5 mm and thickness of 4.1 mm, stipe thickness of 3.3 mm, and length of 154.2 mm. The number of valid fruiting bodies was 1,048 unit per 1,400 mL bottle, and the individual weight was 0.71 g per unit. The yield of fruiting bodies was 402.8 g per 1,400 mL bottle.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.347-357
• /
• 2003

This paper describes on the suppression of sea clutter on marine radar display using a cell-averaging CFAR(constant false alarm rate) technique, and on the analysis of radar echo signal data in relation to the estimation of ARPA functions and the detection of the shadow effect in clutter returns. The echo signal was measured using a X -band radar, that is located on the Pukyong National University, with a horizontal beamwidth of $$3.9^{\circ}$$, a vertical beamwidth of $20^{\circ}$, pulsewidth of $0.8 {\mu}s$ and a transmitted peak power of 4 ㎾ The suppression performance of sea clutter was investigated for the probability of false alarm between $l0-^0.25;and; 10^-1.0$. Also the performance of cell averaging CFAR was compared with that of ideal fixed threshold. The motion vectors and trajectory of ships was extracted and the shadow effect in clutter returns was analyzed. The results obtained are summarized as follows；1. The ARPA plotting results and motion vectors for acquired targets extracted by analyzing the echo signal data were displayed on the PC based radar system and the continuous trajectory of ships was tracked in real time. 2. To suppress the sea clutter under noisy environment, a cell averaging CFAR processor having total CFAR window of 47 samples(20+20 reference cells, 3+3 guard cells and the cell under test) was designed. On a particular data set acquired at Suyong Man, Busan, Korea, when the probability of false alarm applied to the designed cell averaging CFAR processor was 10$^{-0}$.75/ the suppression performance of radar clutter was significantly improved. The results obtained suggest that the designed cell averaging CFAR processor was very effective in uniform clutter environments. 3. It is concluded that the cell averaging CF AR may be able to give a considerable improvement in suppression performance of uniform sea clutter compared to the ideal fixed threshold. 4. The effective height of target, that was estimated by analyzing the shadow effect in clutter returns for a number of range bins behind the target as seen from the radar antenna, was approximately 1.2 m and the information for this height can be used to extract the shape parameter of tracked target..

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.43-53
• /
• 2005

This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.338-350
• /
• 1988

In order to solve the taxonomic problems of the genus Juniperus growing in South Korea, an identification key of the genus and species was developed bayed un flower structure, cane and seed shape, branching habit, tree form, leaf characteristics etc. of the 7 native species and the a exotic cultivars. The typical pattern of karyotype found by chromosome analysis of the species was used for the identification among morphologically similar species. The length of chromosome were ranged $9{\sim}15{\mu}m$ in all studied specie. J. chinensis, var. procumbens, and var. kaizuka sere tetraploid, 4n=44, var. globosa, var. procumbens, var. horizontalis, J. virginiada, J. rigida, J. rigida var. longicarpa, and J. coreana were diploid, 2n=22. The species in the Sabina section showed large variation in the length of chromosome and kinetochore position. The species in the Oxycedrus section showed the cytological characteristics that the 11th chromosome t-type(acrocentric), and the m-type abundant chromosome set was relatively uniform as compared to those of the Sabina section. The species in the Sabina section, which are planted in the large city area, show great morphological variation because many different ecotypes were mixed and often crossed among them. In summary, this study was able to make clear identification and to find out similarity among Juniperus, species by the morphological and cytological analysis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.75-82
• /
• 2010

This study formed an estimation of the visual characteristics of urban bridges in Yanghwaro in the Gyeongui Railroad Area using a landscape simulation. Existing theses have formerly only suggested directions for design based on visual preference, but there is as yet no research on the practical process of landscape design. As a result, it is difficult to directly apply this to bridge design. This study found a potential bridge site and presented a direction for bridge design in order to improve the image of the surrounding urban landscape by surveying the visual effects and landscape preferences of different bridge types. An urban landscape was produced using a landscape simulation model and was made the background for the survey. Five bridge types--Girder, Arch, Truss, Cable and Suspension--were selected and presented. The shapes of the bridges were selected based on the floor plan. The results of this study are as follows. In a preference analysis, every bridge except Girder was evaluated as a positive influence. When rating the image, 'artificial' was rated significantly higher than other traits when assessing the background image. When the Girder Bridge was introduced, 'stable' and 'orderly' were both rated highly while 'stable', 'beautiful', 'orderly' and 'interesting' were high with the introduction of the Arch Bridge. 'Beautiful', 'stable', and 'orderly' were given a high value in the introduction of the Truss Bridge and every image except 'natural', 'harmony' and 'orderly' were highly rated in the introduction of the Cable Bridge. Further, every image but 'natural' was highly rated with the introduction of the Suspension Bridge. Based on the analysis of the landscape, there is a difference in preference before and after modeling a bridge type, while the bridge itself is an influence when it is the main object of the simulated scene. This study researched only the shape of the bridge as a part of the landscape but other elements such as stability, economics, and construction are also factors in the design of a bridge. Stability, economics, construction and other factors must be considered when selecting a bridge type in the future.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.252-265
• /
• 2017

This study aims to analyze the landscape ecological characteristics of green spaces within built up area of high density and evaluate the potential applicability of green patches, thereby introducing urban garden for generating green networks in residence areas. To this end, Yeoksam-Dong was selected as the site area since it is classified as both green initiative zone and alienated area of park service in Seoul. First, the current condition of green spaces in Yeoksam-Dong was identified by five categories: Street trees, private garden, public pocket garden, rooftop garden, and park. Then, the landscape index analysis through FRAGSTATS and connectivity assessment via multi-buffer zone analysis were carried out for analyzing the green networks and evaluating the potential value of green space. The results showed that the degree to which green areas in the site were distributed is arranged in the order of street tree, private garden, public pocket garden, park, and rooftop garden. In case of the street trees whose total core area (TCA, $1,618m^2$) is as high as the park's ($1,128m^2$). Private garden has potential for green network in built up area of high density by gardening since the shape of the patches are irregular (ED = 78.1m/ha) and the average distance among the patches is close (ENN=33.9m). Public pocket garden has also potential for gardening according to the result that it was found to be distributed evenly (LPI=5.7%, SHEI=0.9) with exposing external disturbance ($TCA=66m^2$). For the green network, 84% of all the study site is covered by small green network in 50m butter range of connected green area. The effect of green network was expected through gardening in public pocket garden (27%) and street tree (26%). Accordingly, it is encouraged to actively utilize street tree, private gardens, and rooftop gardens and to establish the urban gardens like local-based community gardens in public pocket garden where a variety of activities can be carried out near residential areas. By doing so, green networks can effectively be established in built up area with high density. The results of this study can contribute positively to fostering the creation of various types of urban gardens.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.48-57
• /
• 2018

In this study, we conducted an analysis on the actual field materials and the ancient text of January 2017. First, Yuyin ShanFang is one of the famous garden in the Lingnan Region, and its total area is $1598m^2$. Wobin called the name 'Yuyin(餘蔭)' meaning the virtues of his ancestors. Second, if we analyze the poem written by Wobin, we can classify it as a phrase expressing the world beyond the future, a poem expressing the ideas of family and romantic ideas. Third, the space spread to the south around the shrine building in the middle of the site was largely a residential space, according to the analysis of the site's layout and spatial composition. Fourth, the spatial component of the hydronic acid is analyzed. The pavilion area is the Hanchwi-Pavilion, which is designated in the Wongrim, and Gyesang-Pavilion, which is a unique range that describes the peak of the garden. Fifth, Yuyin ShanFang has five ponds that are very diverse in shape. It is characteristic of us to stand on a technical boundary. Sixth, Seokgasan was referred to as Gyeongbansan, which was named after The builder Wobin and his descendants who passed it. Seventh, Hwachang is characterized by a wooden bull window and a compound glass. Eighth, the alumni style is not as diverse as the alumni style of the Suzhou traditional garden, but it features various forms and colorful pictures on the front of the alumni. Ninth, the one-piece sculptures of the interior of a building are expressed themes such as Gilsang, Sukjeong, Daoism, Palseom, and others. Finally, Trees planted in Yuyin ShanFang are mostly tropical plants, and some of them have symbolic meaning. Because the weather here is good for growing fruit, so planted a lot of fruit trees.

• Development and Reproduction
• /
• v.10 no.4
• /
• pp.227-238
• /
• 2006

Genomic DNAs(gDNAs) were isolated from the venus clam(Gomphina aequilatera) from Samcheok(venus clam from Samcheok; VCS) and Wonsan(venus clam from Wonsan; VCW) located in the East Sea of the Korean Peninsula. The amplified products were generated by agarose gel electrophoresis(AGE) with oligonucleotides primer, detected by staining with ethidium bromide and viewed by ultraviolet ray. The seven arbitrarily selected primers BION-21, BION-23, BION-25, BION-27, BION-29, BION-31 and BION-33 generated the shared loci, polymorphic, and specific loci, with the molecular sizes ranging from 150 bp to 2,400 bp. In this study, 147 polymorphic loci(147/954 loci, 15.41%) in VCS population and 274(274/996 loci, 27.51%) in VCW population were generated with seven primers. These results suggest the genetic variation in VCW population is higher than in VCS population. Especially, the 700 bp bands generated by the primer BION-21 were identified commonly in two Gomphina populations, which identified populations and/or species. This specific primer was found to be useful in the identification of individuals and/or population, resulting from the different DNA polymorphism among individuals/species/population. Two Gomphina populations between the individual SAMCHEOK no. 03 and WONSAN no. 22 showed the longest genetic distance(0.696) in comparison with other individuals used. The complete linkage cluster analysis indicating three genetic groupings and dendrogram revealed close relationships among individual identities within two geographical populations of venus clam(G. aequilatera) from the Samcheok and Wonsan. The intra-species classification and clustering analyses inferred from molecular markers supported the traditional taxonomy of the species based on morphological characters such as shell size, shape and color. Accordingly, as mentioned above, RAPD analysis showed that VCS population was more or less separated from VCW population.