• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.542-546
• /
• 2009

Methane production using the mixed organic wastes of peel-type fruit wastes from apple or orange and sewage sludge was investigated in the batch anaerobic degradation process. When apple or orange peels with sewage sludge were used as mixed substrates, higher methane production was achieved under the condition of 3 : 7 (fruit peel : sewage sludge) mixing ratio. However, above the 3 : 7 mixing ratio, the pH of mixture was decreased from 8.0 to 4.5~4.7 due to organic acid production from the fruit wastes. Subsequently, methane production was low. The results in this study could be effectively applied to the methane gas production system as a bioenergy in the mixed batch anaerobic digestion process using the peel-type fruit wastes and sewage sludge.

• Journal of Climate Change Research
• /
• v.5 no.3
• /
• pp.209-218
• /
• 2014

In this study, the researchers have developed the greenhouse gas emission coefficients targeted at sewage sludge incineration plants that treat sewage sludge by incineration. Among the gases emitted from the sewage sludge incineration plants, the greenhouse gases showed concentrations of 6.84% for $CO_2$, 4.51 ppm for $CH_4$, and 86.34 ppm for $N_2O$; calculated into greenhouse gas emission coefficients, these gave $276.06kg\;CO_2/ton$, $0.0066kg\;CH_4/ton$, and $0.35kg\;N_2O/ton$. As the result of calculating the greenhouse gas emission quantity in sewage sludge incineration plants using the greenhouse gas emission coefficients, the gross greenhouse gas emission was $84.63ton\;CO_2\;eq./day$, and the net emission was $23.90ton\;CO_2\;eq./day$; this was $37.52ton\;CO_2\;eq./day$ less than the net greenhouse gas emission that was calculated using the standard values of IPCC, which was $61.42ton\;CO_2\;eq./day$. This difference is probably because unlike the standard values of IPCC, the greenhouse gas emission coefficients of this study reflected the special properties of subject facilities. Thus, it is thought that emission coefficient research on the facilities that deviated from the standard values of IPCC should continue to achieve the development of national greenhouse gas coefficient that reflects the special properties of Korea.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.109-112
• /
• 2005

As civilization progresses amount of sewage sludge continues to increase from a sewage disposal plant with a huge expenditure of water resources. So It is necessary to reduce the high costs of sewage disposal and the pollution of the environment and also a unit cost of artificial lightweight aggregate by continual recycling. The purpose of this study is to put artificial lightweight aggregate concrete to practical use by using sewage sludge and clay

• Journal of environmental and Sanitary engineering
• /
• v.17 no.3
• /
• pp.83-88
• /
• 2002

This study was performed to determine the possibility of sludge treatment by ozone for reducing the sludge production in sewage treatment. To evaluate the characteristics of the release of organic matters and nutrient from sludge degradation by ozone, SCOD, SBOD/TCOD, T-N and T-P were analyzed. From the results, we concluded that the concentration of soluble organic matters(SCOD) was increased with reaction time. Also, The concentration of T-N and T-P were increased with time like as organic matters. Quantities of released SCOD, SBOD, T-N and T-P by ozonization were 0.038g, 0.058 g, 0.011 g, 0.012 g per g MLSS, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.3
• /
• pp.247-256
• /
• 2006

This study has been conducted for the process of food wastes disposal using surplus capacity of established sewage treatment plant by co-digestion of fermented food wastes and sewage sludge after thermophilic acid fermentation of food wastes. The co-digestion of thermophilic acid fermented food wastes and sewage sludge was performed by semi-continous method in mesophilic anaerobic digestion reactor. It showed great digestion efficiency as the average SCOD and VS removal efficiency in organic loading rate 3.30g VS/L.d. were 74.2% and 73.6%, and the gas production rate and average methane content were 0.440 L/g $VS_{add}.d$ and 66.5%, respectively. Based on the results of this study, the co-digestion of thermophilic acid fermented food wastes and sewage sludge in sewage treatment plant is able to improve treatment efficiency of anaerobic digestion reactor and to dispose food wastes simultaneously, and was proved excellent economical efficiency comparing with any other treatment methods.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.97-104
• /
• 2003

Hydrogen fermentation of food waste and sewage sludge was performed in serum bottles under various volatile solids(VS) concentrations(0.5~5.0%) and mixing ratios of two substrates(0:100-100:0, VS basis). Full quadratic equations, optimal conditions, and 90% acceptable conditions for hydrogen production potential and rate were obtained using cumulative methane production data and response surface methodology. The specific hydrogen production potential of food waste was higher than that of sewage sludge. However, hydrogen production potential increased as sewage sludge composition increased up to 13~19% at all the VS concentrations. The maximum specific hydrogen production potential of 122.9 mL/g $carbohydrate_{added}-COD$ was found at the waste composition of 87:13(food waste:sewage sludge) and the VS concentration of 3.0%. The relationship between carbohydrate concentration, protein concentration, and hydrogen production potential indicated that enriched protein by adding sewage sludge might enhance hydrogen production potential. The maximum specific hydrogen production rate was 111.2 mL $H_2/g$ VSS/h. Food waste and sewage sludge were, therefore, considered as a suitable main substrate and a useful auxiliary substrate, respectively, for hydrogen production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.134-140
• /
• 1984

Field study was conducted to investigate the effect of sewage sludge application in paddy soil 1. Sewage sludge was available as source of nitrogen fertilizer. 2. Optimum amounts of sewage sludge application were 450kg/10a at the fertilizer (N-P-K) level of 7.5-10-10kg/10a and 350kg/10a at that of 15-10-10kg/10a. 3. Tillers, panicles and nitrogen content in rice plant were increased but percentage of ripeness was decreased with amounts of sewage sludge and/or chemical fertilizer. 4. Nitrogen utilizations were 25 and 18% at the level of 7.5-10-10 and 15-10-10kg/10a as fertilizer (N-P-K). On the other hand, maximum utilization of sewage sludge applied with fertilizer was near to 18%. Sewage sludge application without fertilizer was 16% of nitrogen maximum utilization and its utilization increased with amounts of sewage sludge application.

• Clean Technology
• /
• v.15 no.4
• /
• pp.265-272
• /
• 2009

In this study the experiments on the static adsorption of benzene were carried out using activated carbon made from sewage sludge. The experiment was performed at 303.15 K, 318.15 K and 333.15 K under the pressure up to 7.999kPa. Isothermal adsorption curves were obtained using Langmuir isotherm, Freundlich isotherm and Toth isotherm for comparison. Based on fitting the adsorption quantity of Benzene (q), the isothermal adsorption curves obtained from Langmuir isotherm and Toth isotherm showed the higher accuracy. Although there was little difference in accuracy between result from Langmuir isotherm and that from Toth isotherm, the adsorption quantity of Benzene (q) was expressed in terms of Langmuir isotherm because less parameters were required for Langmuir isotherm than for Toth isotherm. Moreover SEM images of the activated carbon from sewage sludge and the commercial activated carbon were taken to observe the pore size development. The results showed that the perforation development of the commercial activated carbon (DARCO A.C., SPG-100 A.C.) was better than that of activated carbon from sewage sludge. Adsorption quantity of benzene on commercial activated carbon was confirmed to be higher than that on activated carbon from sewage sludge. However the maximum adsorption quantity of benzene on activated carbon from sewage sludge was close to that on SGP-100 A.C. at 303.15K. Therefore, we may conclude that it is feasible to commercialize the process to manufacturing activated carbon from sewage sludge.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.35-43
• /
• 2003

In this study, the physical and chemical characteristics of incinerated pulp and sewage sludge ashes for recycling and reuse were examined. Then we studied the application to the cement admixture by pozzolanic reaction. The particle size of incinerated pulp and sewage sludge ashes was distributed around $10{\sim}100{\mu}$, and the contents of $SiO_2$ and $Al_2O_3$ were 45.8~51.0%, respectively. Compressive strengths of the solidified ashes were relatively higher, when the content of substituted incineration ashes was 10% and the porosity was also lower except for the case of sewage sludge ash. As results, it is shown that it may be possible to recycle incinerated pulp sludge ashes as cement admixtures.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.2
• /
• pp.40-46
• /
• 2010

In this study, microwave irradiation, which is reflected by metals, was used to reduce the amount of sewage sludge, and the results were used to verify solubilization efficiency and determine optimum operation conditions. Biogas production and methane content of the gas under optimized conditions were measured with the biochemical methane potential (BMP) test. The sludge was taken from a thickened sludge tank at J sewage treatment plant (JSTP) in Seoul, Korea. For the experiments, 50 mL of sludge was filled in vessels and the vessels were irradiated with the power of 500, 600, 700, and 800W for 2~5 min. In addition, Fe powder was added by 0.01, 0.05, and 0.1 g to compare the efficiency with and without Fe powder. The results confirmed that solubilization efficiency was higher in the presence of Fe powder. The optimum conditions of 0.01 g addition of Fe powder with 800W irradiation for 5 min, yielded nearly 22.95% higher solubilization efficiency than without Fe powder. The BMP tests were carried out using sludge obtained from the experiments carried out under the optimum conditions. As a result, sludge subjected by 800W with 0.01 g of Fe powder for 5 min displayed the highest level of gas production and methane content. Through this study, it could be confirmed that solubilization efficiency increased by addition of Fe powder.