• 산업공학
• /
• 제24권4호
• /
• pp.341-350
• /
• 2011

This paper considers a problem of locating both distribution centers and retailers in a zone-dependent two-level distribution network where either a distribution center or a retailer should be located in each zone. Customer demands of each zone should be satisfied directly from either its own distribution center or its own retailer being supplied from a distribution center of another zone. The objective of the proposed problem is to minimize total cost being composed of distribution center/retailer setup costs and transportation costs. In the analysis, the problem is proved to be NP-hard, so that a branch-and-bound algorithm is derived for the problem. Numerical experiments show that the proposed branch-and-bound algorithm provides the optimal solution efficiently for some small problems.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (3)
• /
• pp.117-119
• /
• 2000

UMTS(Universal Mobile Telecommunication System)의 Core Network에서는 SGSN(Serving GPRS Support Node)과 GGSN(Gateway GPRS Support Node)사이의 전송계층을 IP-Over-ATM network을 기반으로 한다. 이는 비연결형(connectionless) IP 트래픽들을 연결지향형(connectionoriented) ATM 전송계층을 통해 전송함으로 이때 효율적인 자원관리를 위해 적절한 VC(Virtual Circuit)의 접속과 해제를 수행해야 한다. 본 논문에서는 [1]에서 제안되는 GPRS(General Packer Radio Service)의 Web 트래픽 모델에 대하여 기존의 VC의 Holding-time을 결정하는 기법인 Holding Cost Pricing Model(LRU, Mean-Variance, Adaptive policy) [2]을 GGSN과 SGSN사이의 ATM 전송계층에 적용하였다. 각각의 기법들에서 VC의 이용률(utilization)과 설정율(setup rate)을 비교함으로써 Adaptive policy 기법의 성능이 다른 기법에 비해 효율적임을 알 수 있다.

• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.20-25
• /
• 2008

The purpose of this study is leading to reduce the setup time and cost of the ground telemetry system for FA-50 program. And using the accumulated experience during T-50 and TA-50 development period, remove the risk of development and construct the optimal ground telemetry system for FA-50. For this study, collect the ground telemetry data of the T-50/TA-50, analyze the data and problems and then suggest the optimal telemetry ground system for FA-50.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.570-574
• /
• 2004

This paper deals with a novel 3-phase power quality disturbance generator. The proposed generator can be applied to the performance that of custom power devices. Voltage sag, swell, outage unbalance and phase shift are provided by the generator. The control scheme for the disturbance generation is simple, and hardware setup is cost effective compared with conventional scheme. The operating principle of the generator is described and the usefulness verified through simulation with 10kVA power rating.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.5-12
• /
• 2003

In order to reduce the lead-time and cost, many useful methods have been applied to rapid prototyping (RP) in recent years. But cutting process is still considered as one of the effective RP methods that have been developed and currently available in the industry. It also offers practical advantages in aspects of precision and versatility. However, traditional 3-axis NC machining has some inherent limitations such as the restriction of tool accessibility and the complex setup. In this work, a new rapid prototyping system with high speed 5-axis machining of plastics has been developed to overcome those limitations. And cutting experiments were conducted to determine the design factors of the system and the cutting conditions of plastics. The architecture of developed system is described in detail and the successful application examples are presented.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.147-150
• /
• 2000

본 논문은 단일설비로 다종제품을 생산하는 생산시스템에서 생산준비비용의 절감효과를 고려한 동적생산계획 모형을 다룬다. 이 모형에서 각 제품에 대한 수요는 유한계획기간에서 동적으로 발생하고 추후조달은 허용되지 않으며 투입자원은 한 종류가 사용된다. 또한, 생산기간마다 생산설비는 다종제품을 동시에 생산하고 이때 각 제품의 생산량은 전체 투입자원량의 일정비율로 생산된다. 이 모형에서 총비용은 생산준비 비용의 절감을 위한 투자비용, 생산준비비용, 각 제품별 재고유지비용으로 구성된다. 본 논문에서는 절감된 생산준비비용 하에서의 최적생산계획과 생산준비비용의 절감을 위한 최적투자액을 동시에 결정할 수 있는 휴리스틱 알고리즘를 제시한다. 또한, 선형 및 지수 감소함수 형태의 생산준비비용 절감함수 하에서 다양한 문제들을 대상으로 한 시뮬레이션 실험을 통해 제시한 휴리스틱 알고리즘의 효율성을 검증한다.

• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.69-78
• /
• 2002

The basic purpose of the JIT(Just In Time) production system is to increase profits by reducing costs-that is, by completely eliminating waste such as excessive stocks or workforce. To achieve cost reduction, Production must promptly and flexibly adapt to changes in market demand without having wasteful slacks. :iuch an ideal is accomplished by the concept of JIT, producing the necessary items in the necessary quantities at the necessary time. The JIT production system is supported by the following: reduction of setup time, smoothing of production, standardization of jobs, improvement activities, design of machine layout, Kanban system, autonomation etc. This study examined the present state of the domestic JIT production system and introduced the empirical case of JIT application a small and medium manufacturing company. A synthetic resins manufacturing company applied JIT principles to its processes and achieved the great performance.

• 융합보안논문지
• /
• 제6권2호
• /
• pp.61-69
• /
• 2006

본 논문에서는 기존의 차별화된 서비스 제공과 달리 보장형 서비스품질 제공 방안을 제시하고, NS-2를 이용한 시뮬레이션 결과를 제시한다. 한정된 자원을 요구하는 가입자별로 공정하게 나누어 가지는 경우 각각의 가입자들은 서비스품질의 저하를 느끼게 되어 전체적으로 가입자의 만족이 줄어든다. 따라서 보장형 서비스품질 제공 기법을 이용하여 제한된 자원내에서만 가입자를 서비스하고 이후에 요구하는 서비스 플로우에 대하여 서비스 제공을 거절함으로서 기존의 가입자의 만족을 증대시킬 수 있음을 알 수 있다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.11-15
• /
• 1999

Monitoring of the cutting force signals in cutting process has been well emphasized in machine tool communities. Although the cutting force can be directly measured by a tool dynamometer, this method is not always feasible because of high cost and limitations in setup. In this paper an indirect cutting force monitoring system is developed so that the cutting force in turning process is estimated based on a AC spindle drive model. This monitoring system considers the cutting force as a disturbance input to the spindle drive and estimates the cutting force based on the inverse dynamic model. The inverse dynamic model represents the dynamic relation between the cutting force, the motor torque and the motor power. The proposed monitoring system is realized on a CNC lathe and its estimation performance is evaluated experimentally.

• Journal of Multimedia Information System
• /
• 제7권1호
• /
• pp.55-72
• /
• 2020

As the IT service environment grows, it is critical in terms of IT service quality to minimize the occurrence of failures due to changes in applications and to diagnose and recover in a short period of time how failure will affect the business. Thus, the Defense Acquisition Program Administration (DAPA) has been building and operating ITSMs to implement IT service management in a leading manner. Information Technology Service Management (ITSM) is divided into events, obstacles, changes, versions and setup management to ensure flexibility and stability in service delivery. It is also operated separately from service level, availability, capacity, financial and IT service continuity management to ensure service quality and cost efficiency. Based on ITSM military service history, this study looks at the impact of quality of service on value, satisfaction, and trust. The results of the analysis are highly valuable for future ITSM implementation and operation.