• 대한치과교정학회지
• /
• 제43권6호
• /
• pp.263-270
• /
• 2013

Objective: To evaluate condylar head remodeling after mandibular set-back sagittal split ramus osteotomy (SSRO) with rigid fixation in skeletal class III deformities. The correlation between condylar head remodeling and condylar axis changes was determined using cone-beam computed tomography (CBCT) superimposition. Methods: The CBCT data of 22 subjects (9 men and 13 women) who had undergone mandibular set-back SSRO with rigid fixation were analyzed. Changes in the condylar head measurements and the distribution of the signs of condylar head remodeling were evaluated by CBCT superimposition. Results: The subjects showed inward rotation of the axial condylar angle; reduced condylar heights on the sagittal and coronal planes; and resorptive remodeling in the anterior and superior areas on the sagittal plane, superior and lateral areas on the coronal plane, and anterior-middle and anterior-lateral areas on the axial plane (p < 0.05). Conclusions: The CBCT superimposition method showed condylar head remodeling after mandibular set-back SSRO with rigid fixation. In skeletal class III patients, SSRO with rigid fixation resulted in rotation, diminution, and remodeling of the condylar head. However, these changes did not produce clinical signs or symptoms of temporomandibular disorders.

• 한국ITS학회 논문지
• /
• 제15권6호
• /
• pp.80-89
• /
• 2016

중앙버스전용차로제는 버스의 통행속도를 향상시키고, 대중교통의 정시성 확보를 통하여 버스를 이용하는 시민의 만족도를 향상시키는 목적으로 대중교통 활성화 정책의 일환으로 추진하고 있다. 교차로 운영방식은 회전 제약, 좌회전 허용, 회전 제약 후 좌회전 U-Turn 허용으로 구분된다. 그러나, 현재 좌회전 U-Turn 등 회전차로를 적용하기 위한 명확한 기준이나 연구가 미미한 실정으로 본 연구는 중앙버스전용차로 교차로 특성요인을 고려한 버스정지선 후퇴거리를 제시하였다. 그 결과, 운영속도 60km/h에서 좌회전 허용시에는 12m를 후퇴하여야 하며 좌회전 U-Turn 허용시에는 17m를 후퇴하여야 하며, 50km/h에서 좌회전 허용시에는 13m를, 좌회전 U-Turn 허용시에는 17m를 후퇴하는 것으로 분석되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권4호
• /
• pp.319-322
• /
• 2011

Purpose: The purpose of this study was to examine the appropriate degree of set-back of the mandible by evaluating the rate of relapse after surgery. Methods: Among the patients who visited our hospital from January 2002 to January 2007 and who underwent orthognathic surgery, of the patients available for follow-up observation, the rate of relapse after surgery was investigated according to the set-back degree. The patients were divided into groups by the degree of set-back, and relapse was evaluated by the radiographs performed the day after surgery, 6 months after surgery, 1 year after surgery, 2 years after surgery and 3 years after surgery. Results: In cases that exceeded the limit of posterior movement of the mandible (13 mm) or that had the wrong position of the condyle, a greater tendency toward relapse was shown. Conclusion: Based on the results of this study, among the cases that required a large amount of posterior movement of the mandible, two jaw surgeries accompanied by bilateral sagittal split ramus osteotomy (BSSRO) and LeFort I osteotomy are recommended.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• 패션비즈니스
• /
• 제15권3호
• /
• pp.22-31
• /
• 2011

In this study, to develop a bodice pattern for women aged 18~24 years, statistical analysis was conducted using the body measurements from 2004 Size Korea and wearing test was conducted. As a result, ease of the bust level to set a horizontal line was decided to be 4cm, that of front interscye line 0cm, and that of back interscye line 0.7~1cm. And the line which divides the horizontal baseline into halves set as the side line. The conversion formula for decision of the scye depth line in the pattern is B/6 + 3.3(cm) + ease (2.5cm), and if bust circumference is 91 or more, it should be 21cm, and if bust circumference is 76 or less, it should be 18.5cm. The back neck line width is 7cm, front neck line width 6.5cm(back neck line width -0.5cm), and front neck depth 8cm(back neck line width +1cm). The shoulder slope was set as a slope of the hypotenuse of a right-angled triangle, which went out 15cm out of the shoulder point and went down 6cm, with tan$21.7^{\circ}$. To develop a final research pattern, wearing test was performed on the primary research pattern for 21 women aged 18~24 years. As a result, the research pattern was evaluated to be significantly higher.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권1호
• /
• pp.28-38
• /
• 2010

The factors influencing the relapse and recurrence of skeletal deformity after the orthognathic surgery include various factors such as condylar deviation, the amount of mandibular set-back, stretching force by the soft tissues and muscles around the facial skeleton. The purpose of this report is to recognize and analyze the possible factors of reoperation after orthognathic surgery, due to early relapses. Six patients underwent reoperation after the orthognathic surgeries out of 110 patients from 2006 to 2009 were included in this study. In most cases, clincal signs of the insufficient occlusal stability, anterior open bite, and unilateral shifting of the mandible were founded within 2 weeks postoperatively. Although elastic traction was initiated in every case, inadequate correction made reoperation for these cases inevitable. The chief complaints of five cases were the protruded mandible combined with some degree of asymmetric face and in the other one case, it was asymmetric face only. Various factors were considered as a major cause of post-operative instability such as condylar sagging, counter-clockwise rotation of the mandibular segment, soft tissue tension related with asymmetrical mandibular set-back, preoperatively existing temporomandibular disorder (TMD), poor fabrication of the final wafer, and dual bite tendency of the patients.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

• Wind and Structures
• /
• 제13권6호
• /
• pp.499-517
• /
• 2010

Advances in structural materials and construction methods have resulted in flexible and light tall buildings, making an assessment of structural safety during strong wind and serviceability/habitability during comparable medium/weak wind important design criteria. So far, lots of studies on suppressing the wind-induced responses have been carried out for tall buildings with aerodynamic modification. Most of the studies on aerodynamic modification have forced on the corner modification, while the studies on taper and set-back are limited. Changes of sectional shape through taper and set-back can modify the flow pattern around the models, encouraging more 3-dimensionalities, which results in reducing the wind-induced excitations. This paper discusses the characteristics of overturning moments and wind-induced responses of the tall buildings with height variations. The reduction of mean along-wind and fluctuating across-wind overturning moments are apparent in the suburban area than in urban area. A series of the response analyses, the rms displacement responses of the tall buildings with height variations are reduced greatly, while the rms acceleration responses are not necessarily reduced, showing dependences on wind direction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권1호
• /
• pp.100-103
• /
• 1991

하악골 전돌증 환자의 악교정 수술시 비익기저부가 좁고, 발육부진을 보일경우 수술의 심미적 효과를 증진시키기 위한 부가적 방법으로서의, 하악골의 후방 이동술과 함께 비익기저부의 증강술을 고려할 수 있다. 이물성형 재료에 의한 증강술은 자가골 이식골에 비하여 술후 체적변화가 적고 안정성을 보이며, 간편하게 시술될 수 있다는 장점을 가진다. 저자등은 하악골 전돌증 및 비익기저부의 발육부전을 보이는 환자의 악교정예에서 하악골 후방이동술과 더불어 부가적인 비익기저부 증강술을 시행하여 술후 15 개월이 경과된 현재 좋은 결과를 보이고 있으므로 이에 보고하는 바이다.

• 소성∙가공
• /
• 제30권2호
• /
• pp.69-73
• /
• 2021

This paper addresses the product shape modification for spring-back reduction in the sheet metal forming process of the cabin sunroof which is applied to the construction equipment. Initially, the anisotropic material properties are measured in order to calculate the degree of spring-back by the numerical simulation of the sheet metal forming process. To reduce the spring-back of the stamped part, several design modifications are suggested according to the geometrical bead arrangement on the planar region. The degrees of spring-back are confirmed for various product designs with different use of the geometrical bead. Finally, the spring-back improvement was validated by manufacturing the tryout product with the modified die set for the optimized product shape.