• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.418-428
• /
• 2020

The aim of this study was to investigate the effect of resistance exercise(RE) on beta-amyloid(Aβ) metabolism, neuronal cell death, and cognitive function in the transgenic mice model of Alzheimer's disease(AD). Fourteen transgenic(tg) mice and fourteen non-transgenic(non-tg) mice were divided into four groups: (1)non-tg-control(NTC, n=7) (2)non-tg-RE(NTRE, n=7) (3)tg-control(TC, n=7), and (4)tg-RE(TRE, n=7). The groups with RE were performed to progressive RE on ladder equipment for 8 weeks. The groups with RE were performed to progressive RE on ladder equipment for 8 weeks. After then, the cognitive function was measured by using the water maze test, and Aβ metabolism-related proteins, neuronal cell death, and SIRT1/PGC-1α pathway were also measured. Here, we found escape latency and time were significantly increased in the TC compared to the NTC group, but it was significantly reduced in the TRE group, indicating RE may ameliorate cognitive dysfunction. Next, we found an increased in Aβ protein of TC compared to NTC, but it was significantly reduced in the TRE group following RE. In neuronal cell death, Bcl-2 was also significantly decreased and Bax was significantly increased in the TC compared to the NTC group, but RE can increase Bcl-2 and reduce Bax, which may elevate the ratio of Bcl-2/Bax. We further found a decrease in the level of ADAM10 and RARβ protein was significantly increased whereas increased in ROCK1 and BACE1 expression level was significantly reduced following RE in the TRE compared to the TC group. In addition, the level of SIRT1/PGC-1α proteins was decreased in the TC group compared to NTC group, but, these markers were significantly increased in the TRE group following RE. Therefore, our finding indicated that RE may ameliorate cognitive deficits by reducing Aβ protein and neuronal cell death via regulating SIRT1/PGC-1α, amyloidogenic pathway, and non-amyloidogenic pathway, which may play a role in an effective strategy for AD.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.477-484
• /
• 2006

The purposes of this study were to compare the apical terminus width of simulated curved root canal prepared with three NiTi file systems used by undergraduates for evaluation the effects of flute angle and pitch or radial land on reducing screw-in effect and to determine more safe NiTi file system for inexperienced operators. Fifty inexperienced undergraduate students prepared 150 simulated curved root canals in resin blocks with three NiTi file systems ; ProFile$^{(R)}$, Hero Shaper$^{(R)}$, K3$^{TM}$. The electric motor set at a speed of 300 rpm and torque of 30 in a 16 : 1 reduction handpiece was used. The simulated root canal was prepared to ISO #25 sizes with each file system. The scanned images of pre- and post-instrumented canal of resin block were superimposed. To evaluate the screw-in effect of three NiTi file systems, apical terminus width of root canal was measured from superimposed images and statistical analysis was performed. There were significant differences in three NiTi flle systems. ProFile$^{(R)}$ had significantly smaller width than Hero Shaper$^{(R)}$ and K3$^{TM}$"" (P < 0.05), but no significant difference was observed between K3$^{TM}$ and Hero Shaper$^{(R)}$. Under the condition of this study, active file system (Hero SHaper$^{(R)}$, K3$^{TM}$) with variable pitch and helical angle had more screw-in effect than passive file system (ProFile$^{(R)}$) with constant pitch and helical angle. It seems that the radial lands play more important role in reducing screw-in effect.

• Korean Journal of Child Studies
• /
• v.1
• /
• pp.65-81
• /
• 1980

This study is aimed at investigating the compensatory education which was already implemented or is being implemented in the U.S.A. and Japan; and at studying the types of programs and their characteristics; and at sounding out the possibilities of the application of such programs in family and social conditions is Korea. In order to achieve the above mentioned objectives, the established items for the study are as follows: (1) Various types of early children's education (2) Programs of compensatory education for the disadvantaged Children (3) Head Start Program, Early Training Project and Montessori School (4) Integrated Preschool Programs (5) Day-Care Center for employed mothers We investigated the various compensatory education programs for the preschool children who are in economically, socially, culturally disadvantaged conditions. Head Start Programs were federally supported programs for preschool children and opened as summer programs in 1965 for the first time. The purpose of Head Start has been to give preschool children the kinds of experiences they need in preparation for school. The Head Start children were found to be significantly better prepared for school than the normal children. However, after six to eight months, their initial advantages had virtually. disappeared and then the simple problem with Head Start and other such programs was that little long-term good could be evidenced unless the high quality educational environment was maintained. Therefore, to solve this problem, three other programs were funded as part of the overall Head Start. These three programs are the Parent-Child Center, Home Start, and the Child and Family Resources Program. The Early Training Project for disadvantaged children was implemented by Klaus and Gray of Peabody College in 1962. The program was a field research study concerned with the development and testing over time of procedures for improving the educability of young children from low income homes. Its major concern was to study whether it was possible to offset the progressive retardation observed in the public schooling careers of children, living in deprived circumstances. Children, who were trained through the Early Training Project were superior to control groups in the test of IQ and vocabulary as well as linguistic abilities, and preparation for reading. This project showed the possibilities which could prevent preschool children from being disadvantaged socially, culturally and mentally. In 1907, Montessori School was established by Maria Montessori in Italy and her school program has been introduced at present to several countries in the world as one compensatory educations. She first began her experimental methods with retarded children, followed by disadvantaged children from the tenements of Rome. The Montessori approach futures a prepared environment and carefully designed, self-correcting materials. The Montessori curriculum presents tastes that feature sequence, order, and regularity, in addition to those that develop motor and sensory skills. She was interested in children's intellectual development and in developing good work habits. One of the latest developed programs for disadvantaged children is "Integrated Preschool Program" which has successfully integrated handicapped and nonhandicapped children. Several studies have showed that handicapped children in integrated school environments are accepted by and interact with their nonhandicapped peers. In fact, this program provides a number of potential, and perhaps opportunities for nonhandicapped children to serve as valuable resources in fostering the development of their handicapped peers. Next we turn to Japanese programs which are divided into two different types. One is Day-Care Center which was established by Child Welfare Law and the other is kindergarten organized by School Education Law. The kindergarten opened in 1876 and it has been part of school systems since 1947 by the implementation of education law, and the Day-Care Center which started in 1890 for the employed mothers. was changed into Day-Nursery by the enactment of child welfare law in 1947. The laws and operational regulations for the Day-Nursery were set up and were put in effect by the establishment standard acts of children welfare facilities, and the Day-Nursery has been operated in various types by the increasing demand, chiefly because of the socio-economical changes of family structures in both urban and suburban areas. Nursery education for physically and mentally disadvantaged children is for those who are blind, deaf and dumb, mentally retarded; physically disadvantaged by accidents or diseases. Montessori education in Japan was started in 1968 and many research groups for studying Montessori were organized. In 1977, Montessori remedial education society was also organized in which they started a number of studies; a study for developing materials; in-service training for the remedial education; and seminars and lectures, etc It is strongly suggested that we study the early educations that are being implemented in Japan and a variety of compensatory educations that were already implemented in the U.S.A. and modify them for the organization of our own model and properly accommodate them to our social needs.

• The Korean Journal of Malacology
• /
• v.31 no.2
• /
• pp.93-101
• /
• 2015

The effects of different stocking densities on the growth and survival rate of the 3-year-old pacific abalone, Haliotis dicus hannai were investigated in marine net cage for a year. Stocking densities in net cage ($2.4{\times}1.2m$) was set 15, 30, 45 and 60 percentage (= per)/sq m (square meter, $m^2$) with share to cross-sectional area per shelter. The water temperature during the testing period was $8.2^{\circ}C-22.1^{\circ}C$, and salinity is $33.5{\pm}0.6psu$, and dissolved oxygen is $7.87{\pm}0.86mg/L$. In the shell length (initial size : $71.50{\pm}2.28mm$) growth and shell breadth (initial size : $46.43{\pm}2.28mm$) of the test abalones, the absolute growth rate (ARG), daily growth rate (DGR) and specific growth rates (SGR) of the 15 per/sq m and 30 per/sq m were higher than those of 45 per/sq m and 60 per/sq m density group (P < 0.05). Also in the weight (initial weight : $35.7{\pm}8.1g$), it showed the same results. In survival rates, it were that 15 per/sq m and 30 per/sq m is significantly higher than 45 per/sq m and 60 per/sq m. Therefore, it was that the 15 per/sq m is optimized stocking density in marine net cages about the 3-year-old pacific abalone over 70 mm size. The result shown that total cross-sectional area under the shelter is based on 15 per/sq m ($2.4{\times}2.4m$, 354 number in a net cage) is suitable for fast growth and survival. But if the economy consider, optimized stocking density would be appropriate to accept 30 per/sq m ($2.4{\times}2.4m$, 710 number in a net cage).

• Korean journal of applied entomology
• /
• v.24 no.2 s.63
• /
• pp.107-114
• /
• 1985

This experiment was performed to see the possibility if soil-borne disease in green house can be controlled by soil solarization in Korea. Thermal death profiles of propagules of some soil-borne fungi, Fusarium oxysporum f. lycopersici, Fusarium oxysporum f. niveum, Rhizoctonia salani, Sclerotinia sclerotiorum, Sclerotium rolfsii and Pythium debaryanum, were obtained under the conditions in water-suspension and in soil. Except Pythium debaryanum, all the fungal units in water-suspension that were colonized on barley grains lost a viability within 7 days in water bath at $45^{\circ}C$. When the soil in test tubes in which barley grains infected with the fungi were also buried all the fungi tested including Pythium debaryanum were completely killed within 7 days in water bath at $45^{\circ}C$. From July to August in Korea, soil temperature at depth of 5cm and 15cm within tunnel in plastic house reached $38^{\circ}C\;to\;57^{\circ}C$ and $40^{\circ}C\;to\;47^{\circ}\C$, in 1982 and 1983 respectively. Even at 15cm depth, soil temperature were kept over $43^{\circ}C$ for 12 hours a day. Adiabatic material set under ground or under mulching with the transparent polyethylene-film on the soil surface had a boostering effect for higher soil-temperature and longer duration. Fungi buried in adiabatic block of the soil in plastic house were completely killed at 15cm depth 14 days after, and at 20cm depth 21 days after soil solarization. The exposure of the pathogens to fluctuating temperature was much more effective than to constant. From the above results, soil-borne diseases may be effectively controlled by soil solarization in the closed plastic house in hot summer season in Korea.

• The Korean Journal of Soil Zoology
• /
• v.6 no.1_2
• /
• pp.25-31
• /
• 2001

Oribatid mite communities in the process of litter decomposition were analyzed In Korean pine (Pinus koraiensis) forests of Namsan and Kwangreung, which were supposed to be under different environmental selective pressures. Oribatid mites were collected bimonthly from the litter bags (mesh size 0.4 mm, 1.7 mm) which was set up in the forest floor of study sites. This study had been carried out from Jan., 1997 to Sept., 1998. Species abundance of Kwangreung (mesh size 1.7 mm) was significantly higher than that of Namsan (mesh size 1.7 mm), but total no. of species did not exceed 30 species in all study sites. Concerning body length, medium sized oribatid mites (0.3-0.7mm) were more abundant than small ( < 0.3 mm) and large ( > 0.7 mm) sized mites. In Kwangreung, species whose body lengths were 0.2 mm to 0.5 mm were major group. However, a little larger species than Kwangreung's major group were dominant in Namsan. Sorenson similarity index and cluster analysis suggested that there were qualitative and quantitative differences in species composition in Namsan and Kwangreung. More species were collected in May through September than the other sampling times, but the pattern was rather different between first year and second year. Newly immigrant species were high in May in the first year and many of them regained on next year. Diversity indices suggested that species diversity of Kwangreung was higher than that of Namsan. Nearly 70% of total individual abundance was occupied by several dominant species in Namsan and Kwangreung . In the litter bags of mesh size 1.7 mm, the most dominant species was Trichogalumna nipponica in Namsan and Kwangreung, but in the litter bags of mesh size 0.4 mm in Kwangreung it was Ramusella sengbuschi which is smaller than T. nipponica. And important species related to litter decomposition were selected as follows; T. nipponica, Epidamaeus coreanus, Scheloribates latipes, Ceratozetes japonicus, Ramusella sengbuschi, Eohypochthonius crassisetiger, and Cultroribula lata.

• The Korean Journal of Financial Management
• /
• v.27 no.1
• /
• pp.181-208
• /
• 2010

In July 2007, Korean government has passed "The Capital Market and Financial Investment Services Act" to further develop the capital markets and the Act was to become effective in February 2009. Using a large sample of Korean firms, we have examined (i) the effect of underwriting activities on the firm value (bond spread) comparing commercial bank and investment bank, and (ii) the determinants of the firm value changes following underwriting activities of bank. To test our goal, we collected a wide range of samples of data for bond issuing activities executed by Korean firms listed on the Korea Stock Exchange (KSE) between 2000 and 2003. Our paper is distinguished from previous studies on this subject in a way that we analyzed the effect of corporate bond underwriting activities with regard to commercial banking and investment banking. Initially, we set up a hypothesis that "Certification View" and "Conflict-of-interest View" are major driving forces behind cross-firm differences in performance following bond issuance. We find that, in general, underwriting by investment bank (securities company) brings a positive effect on the firm value (spread between bench mark rate and bond issuing rate). This result indicates that firm value has been negatively affected by the bank underwriting and provides the evidence for "Conflict-of-interest View" in Korea. Our studies have also revealed that any change in firm value following bond issuance is positively related with the firm size (total asset), operating performance, liquidity (cashflow), and equity ownership by foreign investors. Overall, our results support the view that bank underwriting activities can play an important role in determining firm value and financial strategies under "The Capital Market and Financial Investment Services Act" of 2007.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.33-41
• /
• 2004

Purpose : Film has been the primary tool in coincidence testing between the light field and the radiation field, which constitutes the quality assurance list of a linear accelerator. But there is a great chance of errors being different among the observer when using film. Thus this study set out to use the BIS(Beam Image System) in addition to film in comparing and evaluating coincidence results between the two fields and in searching for the improvement measures. Materials & Methods : Photon beam of 6 and 15MV was exposed to film and the BIS using a linear accelerator. The light and radiation fields were each $50{\times}50,\;100{\times}100,\;and\;200{\times}200mm^2$. The gantry angle was $0^{\circ}$ when using film and $0^{\circ}\;and\;270^{\circ}$ when using the BIS. The devices adopted to test coincidence between the two fields were a ruler and film scanner when using film. With the BIS, the width of the scanned light and radiation fields was measured for errors with setting the X and Y axis. Results : The visual measurements of the observer with film resulted that the radiation field was bigger than the light field and that their maximum error was 1.9mm. The results were the same with the measurements using the film scanner except for the average error, which was less than 1.9mm. On the contrary, the measurements using the BIS showed that the light field was bigger than the radiation field at the gantry angle of $0^{\circ}\;and\;270^{\circ}$. The maximum error was 0.96mm, and the error range was $<{\pm}2mm$ both in the X and Y axis. The average error of ${\Delta}X$, Y was the smallest in the order of the visual film measurements, film scanner measurements, and BIS measurements Conclusion . This requires a careful measurement for accurate quality assurance since errors are much different according to each observer that tests coincidence between visual fields with film. And an observer needs to use another image device or develop a measuring device of his own if it seems necessary for accurate measurements.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.149-168
• /
• 2008

The purpose of this study is to verify the effect of PSpice instruction on academic achievement in 'Combination logic circuit' unit of 'Digital Logic Circuit' in industrial high school. Three kinds of null hypotheses were formulated. Two classes of the third grade of C technical high school in Gyeong-buk were divided into experimental group and control group in order to verify null hypotheses. In the experimental design, 'Non-equivalent control group pretest-posttest' model was utilized. This experiment was conducted for six classes, the experimental group was applied to PSpice instruction method before the circuit traning while the control group was applied to traditional lecture oriented method before the circuit traning. Window SPSS 10.0 korean language version program was used for the data analysis and independent sample t-test was used to identify the average of each group. Significance level was set to .05 level. The results obtained in this study were as follows; First, PSpice instruction had not an effect on academic achievement according to a group type. However, these instruction had an effect on the following sub-domains; the psychomotor domain. Second, PSpice instruction had not an effect on academic achievement according to a studies level. However, these instruction for middle and low level students had an effect on the cognitive and psychomotor domain, and for middle level students had an effect on the affective domain. Third, PSpice instruction had not an effect on shortening of a training requirement. However, this instruction for low level students had an effect on shortening of a training requirement. The study results of simulation instruction was chiefly efficient in the psychomotor domain. We could know that simulation instruction is efficient as went to a low level students than an upper level students. Thus, We may make the study effectiveness in various instruction method.