• 제목/요약/키워드: service standardization

검색결과 614건 처리시간 0.025초

위치기반 서비스 고도화 기술 비교 분석 (Comparative analysis for advanced technologies of the location based service)

  • 심현보
    • 한국정보통신학회논문지
    • /
    • 제16권4호
    • /
    • pp.853-871
    • /
    • 2012
  • 위치기반서비스는 넓은 지역을 커버하기 위해 인공위성이나 이동통신기지국을 이용하는 GPS와 건물 내부나 공원과 같이 한정된 공간(근거리)에서 Zigbee, RFID, CSS(Chirp Spread Spectrum), UWB, Bluetooth, Wi-Fi 장비 등을 이용하는 RTLS(Real Time Location System)로 나눌 수 있으며, 유선과 무선 인프라의 발전과 측위 기술의 고도화, 인터넷의 발전, 콘텐츠의 다양화 등을 통하여 기술적 발전을 거듭하고 있으며 향후 공통 핵심 기술 요소인 측위 기술, 콘텐츠 기술, 인터넷 및 이동통신기술 등을 중심으로 발전할 것으로 예상된다. 본 논문에서는 LBS의 발전방향에 대한 신기술과 표준화 기술을 조사 분석하여 관련 업계에 기여할 방향을 찾고자 한다.

의료용 전기기기에 대한 국제표준 현황 (International Standards of Electrical Equipments for Medical Practice)

  • 이태범
    • 보건의료산업학회지
    • /
    • 제7권3호
    • /
    • pp.203-212
    • /
    • 2013
  • Medical devices separated by a committee of the International Electrotechnical Commission IEC TC (Technical Committee) 62 medical electrical equipment being promoted by the International standards. Actually, a lot of standards were existed, but many national and international standards for medical devices were lacking in practical standards that can be applied to their development. Most international standards were focused in electrical and mechanical safety of medical devices. Therefore, there were few practical standards which contain essential performance evaluation. Although medical device regulations do not enforce a fixed lifecycle model, activities are presented in a sequential manner, thus hinting at a waterfall process. Meanwhile, for a decade or more, software teams have benefitted from agile development methods. Several medical device manufacturers have adopted agile practices while keeping development in compliance with regulations, but conflicts arise and decisions have to be taken in favor of agility or formality. However, if there are new practical standards of medical devices, it must be possible to promote the medical devices industry in their nation. To do this, there is a need to develop a new standard could apply to the international market through the analysis of the medical device related technology. Consequently, new standards such as NP (New proposal) or NWIP (New Work Item Proposal) should be developed through international standardization of medical device technology.

디지털 마을방송 시스템 구축을 위한 전파 측정 및 분석 (Measurement and Analysis of Propagation for the Digital Radio Village Broadcasting System)

  • 최다솜;강영흥
    • 한국항행학회논문지
    • /
    • 제20권6호
    • /
    • pp.568-573
    • /
    • 2016
  • 현재 아날로그 방식의 마을방송 시스템은 기술 적용의 문제 및 시설 노후화로 인한 성능 저하 등의 문제로 인하여 디지털 시스템으로의 전환과 이에 따른 시스템 표준이 요구되고 있다. 효율적인 디지털 무선 마을 방송 시스템의 구축을 위해서 파라미터를 토대로 전파환경 특성에 기반을 두어 전파의 실측값과 예측 값의 비교분석이 필요하다. 본 논문은 지역 환경을 고려하여 도시지역, 산간지역, 평야지역으로 경로를 설정하여 전파 측정을 하였으며, 측정을 통한 실측값과 예측 값을 SMIS (spectrum management intelligence system) 및 Matlab을 이용하여 전계강도 및 오차를 비교분석하였다. 본 논문의 결과는 전파수신 전력 및 지형별 환경 등의 전파 특징을 예측하고 마을 방송 표준의 확립과 시범 사업화를 위한 자료로 활용될 것이다.

국내 및 일본의 유비쿼터스 홈 기술 동향 (Technical Trends of Ubiquitous Home in Korea and Japan)

  • 임신영;허재두
    • 정보통신설비학회논문지
    • /
    • 제3권1호
    • /
    • pp.102-115
    • /
    • 2004
  • 유비쿼터스 컴퓨팅 기술을 근간으로 하는 차세대 디지털 홈 서비스 및 기술 분야는 지난 수년 동안 높은 관심과 노력을 기울여온 일본과 한국의 경우, 선의의 기술 경쟁과 기술 표준 공조를 병행하는 상황이다. 본 논문은 2004년 5월 현재 국내 및 일본의 유비쿼터스 홈 기술에 대한 동향을 조사하기 위한 일환으로 양국의 유비쿼터스 홈 전시관들을 방문한 기술 동향에 대하여 논한다. 이러한 기술적 동향을 파악함으로써 일본의 세계적인 기업과 연구소들이 추구하는 기술 및 접근 방법과 우리의 내용과의 비교를 통하여 서로의 장점을 사업화할 수 있는 방안을 모색할 수 있을 것으로 판단된다.

  • PDF

텔레매틱스 단말 표준 소프트웨어 플랫폼 개발 (Development of Standardized Software Platform for Telematics Terminal)

  • 최재훈;김경호;최완식
    • 정보처리학회논문지A
    • /
    • 제13A권7호
    • /
    • pp.581-588
    • /
    • 2006
  • 텔레매틱스 서비스가 활성화되면서 국내외적으로 단말기 소프트웨어 플랫폼에 대한 개발 노력들이 전개되고 있다. 국내에서는 텔레매틱스 표준화 포럼을 중심으로 표준을 개발하고 있으며, 무선 인터넷 표준 플랫폼인 위피 차원에서도 텔레매틱스를 지원하기 위한 검토들이 이뤄지고 있다. 국제적으로도 OSGi와 GST와 같은 표준화 기구를 중심으로 차량 정보를 기반한 플랫폼을 제시하기 위한 표준 개발들이 전개되고 있다. 이러한 배경하에 본 논문은 국내외의 텔레매틱스 단말 소프트웨어 플랫폼 관련된 표준화 현황을 고찰하고, 우리나라 텔레매틱스 서비스 활성화에 적합한 단말 소프트웨어 플랫폼 표준을 아키텍처와 요구기능, 그리고 인터페이스의 세 단계로 나누어 제안한다.

인공지능을 활용한 클라우드 컴퓨팅 서비스의 품질 관리를 위한 데이터 정형화 방법 (Data Standardization Method for Quality Management of Cloud Computing Services using Artificial Intelligence)

  • 정현철;서광규
    • 반도체디스플레이기술학회지
    • /
    • 제21권2호
    • /
    • pp.133-137
    • /
    • 2022
  • In the smart industry where data plays an important role, cloud computing is being used in a complex and advanced way as a convergence technology because it has and fits well with its strengths. Accordingly, in order to utilize artificial intelligence rather than human beings for quality management of cloud computing services, a consistent standardization method of data collected from various nodes in various areas is required. Therefore, this study analyzed technologies and cases for incorporating artificial intelligence into specific services through previous studies, suggested a plan to use artificial intelligence to comprehensively standardize data in quality management of cloud computing services, and then verified it through case studies. It can also be applied to the artificial intelligence learning model that analyzes the risks arising from the data formalization method presented in this study and predicts the quality risks that are likely to occur. However, there is also a limitation that separate policy development for service quality management needs to be supplemented.

공공경보시스템 개선을 위한 국가별 공공경보시스템 비교분석 연구 (A Comparative Analysis of Public Warning Systems by Countries to Improve Public Warning System)

  • ;김재영;안병대
    • 한국정보시스템학회지:정보시스템연구
    • /
    • 제32권3호
    • /
    • pp.183-203
    • /
    • 2023
  • Purpose The purpose of this study is to examine the current operational status and problems of the Public Warning System (PWS) in China, and to propose feasible solutions to improve the performance and efficiency of the PWS through a comparative analysis with the Cell Broadcast Service (CBS)-based disaster SMS system adopted by other developed countries in the world. Design/methodology/approach In this study, the characteristics of PWS using SMS, applications, and CBS, respectively, are analyzed in detail, and compared and analyzed in terms of convenience, standardization, data security, speed, and location accuracy. In addition, CBS-based PWS in developed countries, such as U.S., E.U., Korea and Japan, were studied and their performance on key criteria was evaluated. Findings Based on the results of the study, the problems of China's PWS are summarized and recommendations are made to improve the PWS through the introduction of CBS technology. To this end, specific improvement measures are proposed in terms of the application of CBS technology, system construction and operation, and improvement of data security. In addition, the comparative analysis of PWSs in other developed countries is conducted to provide reference for the direction of PWS's improvement.

환승센터내 환승정보서비스를 위한 정보연계 표준화 연구 (A Study on the Standardization of Information Connection for Transfer Information Service in Transfer Center)

  • 배명환;오동섭;이승환;오세창
    • 대한교통학회지
    • /
    • 제29권5호
    • /
    • pp.33-42
    • /
    • 2011
  • 환승센터의 규모가 점차 대형화됨에 따라 대규모 환승센터에서 동적으로 이동하는 이용자의 편의를 고려한 환승정보서비스가 필요하다. 이러한 서비스는 동적으로 이동하는 이용자에게 무선통신이 가능한 개인 휴대단말기(Mobile phone, Smart phone)를 통해 환승정보제공을 가능하게 한다. 특히, Wi-Fi를 이용한 실내위치측위 기술은 실용화 단계로서 GPS와 Wi-Fi를 탑재한 Smart phone을 통해서는 실내외 위치기반 환승정보서비스가 가능하다. 따라서, 본 연구에서는 환승센터에서 환승센터 내부 이용객의 위치를 기반으로 하는 환승정보의 제공과 환승활동을 지원하는 정보제공서비스를 제시하였으며, 이러한 환승정보서비스를 위해 필요한 논리/물리 아키텍처 및 물리적 구성요소의 정보흐름의 제시와 정보연계 표준화 대상을 도출하여 각 표준화 대상에 대한 정보연계 표준안을 제시하였다.

헬스케어를 위한 호환 가능한 셋톱박스 설계 (Design of Compatible Set-Top Box for Healthcare)

  • 한정수
    • 디지털융복합연구
    • /
    • 제12권7호
    • /
    • pp.285-290
    • /
    • 2014
  • 병원에 직접 가지 않아도 집에서 진료결과를 쉽게 확인할 수 있고 환자가 원하는 최적의 서비스를 최적의 타이밍에 제공받을 수 있다는 많은 장점에도 불구하고 현재 사용되고 있는 개인 헬스케어 기기는 제조사들이 만든 독자적인 소프트웨어 하드웨어 프로토콜로 인해 기기들 간의 호환성이 거의 없다. 이러한 문제 때문에 개인 헬스케어 기기와 셋톱박스 간의 표준화가 매우 필요하며, 이를 위해 본 연구에서는 IEEE P11073 표준을 이용하여 개인 헬스케어 기기와 셋톱박스 간의 생체 데이터 전송이 가능한 헬스케어 셋톱박스를 설계하였다. IEEE P11073 표준을 이용한 셋톱박스는 다양한 헬스케어 기기에 대한 독립적 데이터 전송을 가능케하여 헬스케어 시장의 활성화에 큰 기여를 할 것이라 기대한다.

전표데이터 처리를 위한 XML Schema 설계에 관한 연구 (A Study on XML Schema for Slip Data Process)

  • 황의철
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
    • /
    • pp.217-223
    • /
    • 2004
  • 거래내역의 투명성 향상을 위한 기초 자료로 사용되는 전표데이터의 구조를 분석하여 전표 XML Schema를 설계하고, 기업회계의 공통적인 전표처리 기능을 전표데이터베이스와 연동되는 기업 회계와 관련된 다양한 분산 애플리케이션에서 이용할 수 있게 하는, 전표데이터의 표준화와 전표처리 서비스의 정형화 모델을 제시한다. 본 논문의 결과는 전자 상거래에 필요한 회계처리 시스템의 표준화, 웹 서비스에 의한 공통 전표처리기능의 간편한 재사용, 웹 서비스의 접근용이성을 이용한 기업 간 상호 연동성을 지원하는 표준화의 확산으로 분산 애플리케이션의 효율적인 개발에 기여할 것이다.

  • PDF