• Computers and Concrete
• /
• v.17 no.1
• /
• pp.29-51
• /
• 2016

Tension-stiffening is the contribution of concrete between the cracks to carry tensile stresses after cracking in Reinforced Concrete (RC) members. In this paper, a tension-stiffening model has been proposed for computationally efficient nonlinear analysis of RC flexural members subjected to service load. The proposed model has been embedded in a typical cracked span length beam element. The element is visualized to consist of at the most five zones (cracked or uncracked). Closed form expressions for flexibility and stiffness coefficients and end displacements have been obtained for the cracked span length beam element. Further, for use in everyday design, a hybrid analytical-numerical procedure has been developed for nonlinear analysis of RC flexural members using the proposed tension-stiffening model. The procedure yields deflections as well as redistributed bending moments. The proposed model (and developed procedure) has been validated by the comparison with experimental results reported elsewhere and also by comparison with the Finite Element Method (FEM) results. The procedure would lead to drastic reduction in computational time in case of large RC structures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3680-3693
• /
• 2022

The handover procedure of IEEE 802.11 wireless local area networks (WLANs) introduces significant delay, which can degrade the quality of service (QoS) especially for delay-sensitive applications. Although studies have been conducted to support handover in SDN-based WLAN, there is no research to reduce the channel scanning procedure that takes up the most delay time in the handover process. The channel scanning procedure is essential to determine the appropriate access point (AP). To mitigate this problem, this paper proposes a SWITCH: SDN-WLAN integrated handover scheme for QoS-Guaranteed mobile service. In SWITCH, each AP periodically broadcasts beacon frames through different channels in a predetermined order that includes the operating channel information of the AP. This allows mobile stations (MSs) to receive the beacon frames of nearby APs, and therefore they can determine the appropriate APs for handover without the channel scanning procedure. By reporting the information of the newly moved AP to the SDN controller, a flow rule is installed in advance to provide fast handover, and packet loss is reduced by buffering data destined for MS. In addition, the proposed scheme can adaptively operate SWITCH to consider the user location and QoS requirement of flow to save radio resource overhead. Performance evaluation results demonstrate that SWITCH can reduce the handover delays, flow table utilization ratio and radio resource overhead while improving the network throughput.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.593-600
• /
• 2009

In Korea, the government has developed SEUMTER, an administration system for building related public service, to facilitate and promote the electronic submission and permission activities. SEUMTER is progressing legality system based on 2D drawing for building administration permission service. However, there are a lot of problems related to legality system owing to complexity of Korea regulation relation and structure, inefficiency of legality system based on 2D drawing, duplication examination of document (soliciting forms for civil affairs) and drawing. Therefore, the purpose of this study is to develop legality system for building administration permission service based on BIM in Korea. To achieve this purpose, the authors have investigated permission procedure and regulation structure that is used in current building administration permission and suggested permission procedure and regulation structure for legality system based on BIM. In addition, the authors have investigated element technologies (for examples, method of structured regulation, BIM model checker, Viewer, etc) for legality system based on BIM. Finally, the authors have suggested strategy and hereafter direction for application of legality system based on BIM.

• Journal of Internet Computing and Services
• /
• v.3 no.6
• /
• pp.1-11
• /
• 2002

The purpose of this paper is the design and implementation of asynchronous remote procedure call (RPC) resource service system using the XML technology. For this purpose, the request information of client is encoded into XML document based on XML-DOM and transferred to server, Server classifies the client requests into general application program and XML-RPC service using the object which can deal with the XML-DOM. In addition, server saves the request result of client in XML-DOM structure not transmitting it immediately in order to support asynchronous service, and makes the client request redirected to another request server in XML-DOM information. As a result, general RPC and XML-RPC services were attained and client request was redirected to servers, and the execution environment was simplified compared to common RPC.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.1
• /
• pp.53-57
• /
• 2013

Several different depreciation systems may be used for group depreciation. The vintage group procedure treats the same type of property placed in service during the same year as a distinct group for depreciation purposes; therefore an estimate of the probable average service life and net salvage ratio(s) of each individual vintage is necessary. The vintage group procedure calculates an accrual rate for each vintage and the accrual rate for an account for specific calendar year is the weighted average vintage accrual rate for that calendar year. A further refinement would be to divide each vintage into groups such that all of the dollars in a group have the same estimated life-an equal life group (ELG). Then each ELG is depreciated over its estimated life. The effect is to recover each dollar over the estimated number of years it is in service. Each vintage is divided into several equal life groups (ELGs) such that all the property in a specific ELG has the same estimated life. The accrual rate for each ELG is based on the estimated life of that ELG. The vintage accrual rate for a specific year is the weighted average ELG accrual rate for that calendar year. In this paper, we illustrate the calculations of vintage accrual rates for each of the calendar years by the ELG depreciation systems.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.211-214
• /
• 2009

In this paper, we present an efficient handover method avoiding ping-pong phenomenon in Wireless LAN systems. In order to provide the seamless VoIP service for terminals with mobility in Wireless LAN systems. Since the variation range of the received signal strength of the moving terminals is large, the handover procedure can be started by an instant drop of the signal strength. Then the handover procedure is repeated, which makes ping-pong phenomenon. Since the quality of service of VoIP can be lowered by ping-pong phenomenon, in this paper, we present the necessary condition to avoid the ping-pong phenomenon. Through LAB test, we show that the proposed handover method can provide an seamless service without the ping-pong phenomenon.

• Steel and Composite Structures
• /
• v.7 no.3
• /
• pp.219-240
• /
• 2007

An analytical-numerical procedure has been presented in this paper to take into account the nonlinear effects of concrete cracking and time-dependent effects of creep and shrinkage in the concrete portion of the continuous composite beams under service load. The procedure is analytical at the element level and numerical at the structural level. The cracked span length beam element consisting of uncracked zone in middle and cracked zones near the ends has been proposed to reduce the computational effort. The progressive nature of cracking of concrete has been taken into account by division of the time into a number of time intervals. Closed form expressions for stiffness matrix, load vector, crack lengths and mid-span deflection of the beam element have been presented in order to reduce the computational effort and bookkeeping. The procedure has been validated by comparison with the experimental and analytical results reported elsewhere and with FEM. The procedure can be readily extended for the analysis of composite building frames where saving in computational effort would be very considerable.

• Journal of Digital Convergence
• /
• v.4 no.1
• /
• pp.55-71
• /
• 2006

The Public Service Charter is one of the administrative reform programs introduced to promote customer oriented administration. It's main purpose is to achieve citizens' confidence in the government by satisfying them with elevated quality of the public services. This study focuses on analyzing current conditions and achievements of the Public Service Charter in the Republic of Korea and proposing it's development plan. Since it was introduced to Korea in 1998, the Public Service Charter has been disseminated and contributed to the spreading of the citizens' understandings of the government's initiatives for customer satisfaction plans. Still, it has several problems as follows; A lot of public servants and citizens lack in understandings of this program. CEOs don't have enough concern in it. Evaluation is not organically connected to performance management. The correction and compensation procedure are not well operated. To solve these problems, the government needs to set up an institutional foundation establishing a legal base, uplifting CFO' concerns, and building a department with full responsibility, and to promote employees and citizens' participation through education and PR. It's also important to enhance post management by efficient evaluation and performance management, substantial correction and compensation procedure.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.194-200
• /
• 2009

This study provides a heuristic algorithm to solve the locating problem of repair service centers (RSCs). To enhance the customer service level with more satisfaction and quicker responsiveness, the locating problem of RSCs has become one of the important issues in reverse supply chain management. This problem is formulated as a zero-one mixed integer programming in which an exiting distributor will be considered to be an un-capacitated repair service center for the objective of cost-minimizing. Since logistical costs are highly interrelated with the multinational location of distributors and RSCs, the fixed cost for setting a repair service center, variable cost, transportation cost, and exchange rates are considered in this study. Recognizing the selection of un-capacitated RSCs' locations is a combinatorial optimization problem and is a zero-one mixed integer programming with NP-hard complexity, we provide a heuristic algorithm named as incremental cost matrix procedure (ICMP) to simplify the solving procedure. By using the concise and structural cost matrix, ICMP can efficiently screen the potential location with cost advantage and effectively decide which distributor should be a RSC. Results obtained from the numerical experiments conducted in small scale problem have shown the fact that ICMP is an effective and efficient heuristic algorithm for solving the RSCs locating problem. In the future, using the extended ICMP to solve problems with larger industrial scale or problems with congestion effects caused by the variation of customer demand and the restriction of the RSC capacity is worth a further investigation.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1562-1566
• /
• 2006

The intelligent railway operation information architecture is to provide the railway passengers with the intermodal transportation information service. The purpose of the information architecture is to suggest the information service architecture of the intermodal transportation structurally. First, the architect procedure is to analysis the user requirements and according to these requirements, is to make the description of service requirements. Then secondly, it decides the service items and based of these items, it is to construction of service architecture. Finally, service package provide an accessible, deployment oriented perspective to intelligent railway operation information architecture