• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.56-62
• /
• 2015

In this study, the quality characteristics of different drying methods of Aronia melanocarpa, which contains large amounts of bioactive substances, were investigated for the improvement of their practical use. During the drying period, the weight reduction was the highest with vacuum freeze drying (81.6%). The water content was reduced to the maximum level when vacuum freeze-drying was used. With regard to the color value measurement results, there were no significant differences in the $L^*$ value. Values of $a^*$ and $b^*$ were increased in vacuum freeze drying and cold air drying, but decreased in hot air drying. The hardness was increased dramatically after 36 hours of hot air drying, while with cold air drying, it increased slowly until 132 hr and increased rapidly after 132 hr. The dried yield was the highest with cold air drying (24.2%). As for the general component analysis results of Aronia melanocarpa, the moisture content was the lowest, and the crude protein and crude fat contents were the highest with vacuum freeze drying. No difference in pH value was shown among the dried Aronia melanocarpa obtained from the different drying methods, but the sugar content was the highest with vacuum freeze drying. The mineral content was the highest with cold air drying, and K, Ca, Mg, and Na were the major minerals. The free sugar content of dried Aronia melanocarpa was found to be 5.92~20.59 g/100 g, and the highest free sugar content was found with vaccum freeze drying.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.185-190
• /
• 2020

The rapid aging is increasing as the shortage of medical facilities and the resulting of decline in the quality of public health. In order to ease the burden of rising medical expenses, advanced medical institutions are expanding their remote medical care to lower the cost of services. U-healthcare detects the changes in physical and chemical phenomena occurring in the human body and converts them into electrical signals that can be processed and feeds back to the results through analytical and visualization processes to select only the desired information from the measured signals. The service is provided through a process of providing an alarm to a user. However, traditional biometric methods of attaching sensors directly to the body can be annoying and rejected in daily life. Therefore, there is a need for a method of continuously measuring biometric information without causing inconvenience to daily life. In this paper, we propose an IR-UWB-based non-contact and non-responsive respiratory measurement system that can continuously monitor biological information without any inconveniences to daily life.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.111-116
• /
• 2017

This study offers the possibility as a new product of souvenirs from cultural tourist sites with virtual reality contents, instead of a simple exhibit. Users can watch augmented reality contents on souvenirs, and use the virtual experience service of cultural tourist sites with VR viewer. It has 4K-class high-quality $360^{\circ}$ image capture to increase the immersion of users in virtual space, implement virtual reality space and intuitive UI interaction with users using IMU (Inertial Measurement Unit). It is also possible to apply various add-on functions, including 3D contents, through technical development to increase its marketability, and apply in other industries. In addition, the prototype of the souvenir and VR viewer will be made by using a 3D printer and such in order to apply the contents which will be introduced in this study. Various product expansions can be considered through consultation with the relevant companies for the use of ready-made products.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.137-144
• /
• 2007

Advances in networking technology digital media, and codecs have made it possible for the Internet evolves into a Broadband convergence Network (BcN) and provides various services including Voice over Internet Protocol (VoIP) and IPTV over their high-speed IP networks. In order for the Internet to make a profit as traditional Public Switched Telephone Network (PSTN), it must provide high qualify VoIP services. Therefore, real time qualify measurement framework is the most important requisite to provide VoIP service. For this, IETF (Internet Engineering Task Force) defined RTCP-Extended Reports (RTCP-XR) that extend RTCP (Real-Time Transport Protocol Control Protocol). However, procedure and method tot actually VoIP qualify measurement did not recommended nothing but defined item to measure voice quality. Our objective in this paper is to describes a practical measuring framework for end-to-end QoS of switched voice packet in an IP environment. It includes concepts as well as step-by-step procedures for measuring packetized voice streams. It also proposes new formats that extend RTCP-XR's concept.

• Industrial Engineering and Management Systems
• /
• v.11 no.3
• /
• pp.233-240
• /
• 2012

The implementation of business process management (BPM) systems in large number of business organizations transforms BPM system into such a level of maturity and tends to collect large repositories of business process (BP) models. This issue encourages BP flexibility that leads to a large number of process variants derived from the same model, but differing in structure, to be stored in the large repositories of BP models. Therefore, the repositories may include thousands of activities and related business objects with variation of requirements and quality of service. It is a common practice to customize processes from reference processes or templates in order to reduce the time and effort required to design and deploy processes on all levels. In order to address redundancy and underutilization problems, a generic process model, called as reference BP, is absolutely necessary to cover the best of process variants. This study aims to develop multiple-objective business process genetic algorithm (MOBPGA) to find a set of non-dominated (Pareto) solutions of business reference model to enhance conventional approach which considered only a single objective on creating BP reference model by using proximity score measurement. A mixed-integer linear program is constructed to evaluate performance of the proposed MOBPGA on small-scale problems by using standard measures for multiple-objective techniques. The results will show the viability of applying MOBPGA in terms of simultaneously maximizing proximity score measurement, minimizing total duration, and total costs of the selected reference model.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.173-184
• /
• 2014

Riparian areas are significant functional grounds for inhabiting ecological system on the river such as the self-regulation of the water quality and the foundation of important corridors. For such functional device to operate, consecutive land purchase scheme that prioritizes targeted areas with high pollutant load rate imposes sustainable development of the ecological riparian belt. The purpose of this study is focused on measuring the methodology for selecting land purchse order before establishing riparian belt in accordance with pollution loading estimation and the basin approach. The Yeongsan and Seomjin river which includes targeted areas of the land purchase have been classified into the large-medium-small(standard basin) influence areas based on their catchment rage, which than sub-divided the research area of Juam lake by 38 small basins and 223 units. Small basins with the high pollution load rates have been assessed as the first prioritized targets. For the second priority, the condition of the point pollutant sources, original area of the targets, original restored area were concerned. The final decision of the land purchase order targeted only those within 50 meter range from the basin. To validate the accumulated data, the on-site investigation went along the targeted zones, which the result shows that all prioritized areas included both point and non-point pollutant sources, and had not a small originally restored areas.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.579-593
• /
• 2010

Low-power radio frequency (RF) chip transceiver technology and the associated structural health monitoring platforms have matured recently to enable high-rate, lossless transmission of measurement data across large-scale sensor networks. The intrinsic value of these advanced capabilities is the allowance for high-quality, rapid operational modal analysis of in-service structures using distributed accelerometers to experimentally characterize the dynamic response. From the analysis afforded through these dynamic data sets, structural identification techniques can then be utilized to develop a well calibrated finite element (FE) model of the structure for baseline development, extended analytical structural evaluation, and load response assessment. This paper presents a case study in which operational modal analysis is performed on a three-span prestressed reinforced concrete bridge using a wireless sensor network. The low-power wireless platform deployed supported a high-rate, lossless transmission protocol enabling real-time remote acquisition of the vibration response as recorded by twenty-nine accelerometers at a 256 Sps sampling rate. Several instrumentation layouts were utilized to assess the global multi-span response using a stationary sensor array as well as the spatially refined response of a single span using roving sensors and reference-based techniques. Subsequent structural identification using FE modeling and iterative updating through comparison with the experimental analysis is then documented to demonstrate the inherent value in dynamic response measurement across structural systems using high-rate wireless sensor networks.

• The Korean Journal of Emergency Medical Services
• /
• v.17 no.1
• /
• pp.41-50
• /
• 2013

Purpose : This study intended to improve the quality of prehospital emergency care for patients with dyspnea by figuring out the current situations and problems based on run-sheets of 119 emergency medical technicians (EMTs). Methods : A total of 336 dyspnea patients were transferred to G university hospital by 119 ambulances from January 1, 2011 to December 31, 2011. Results : The data were analyzed by SPSS 19.0. Patients over 60 years old accounted for 57.2% and 48.4% had the history of heart disease. Among the heart disease patients, 31.7% complained of dyspnea and chest pain. The vital sign measurement performance by 119 EMTs increased compared to previous study. The number of prehospital treatment by 119 EMTs significantly increased depending on the mental state of the patients. Conclusion : 119 EMTs should remind the heart disease and other past history of the patients when they perform the dyspnea patient care.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.1
• /
• pp.71-78
• /
• 1997

The productivity of a hospital foodservice system has a significant implication in hospital management as costs for labor and material increase, competitions among hospitals increase, and patients' expectations as to the quality of hospital services increase. The foodservice is characterized by its labor intensiveness. The objective of this study was to examine associations between operational and managerial factors and the productivity of dishwashing work in hospital foodservice systems. The labor productivity in 20 conventional food service systems was assessed and related to a number of influencing variables within the system. The productivity measurement was based upon the total dish equivalents as a ratio of the total direct and non-direct labor hours required to wash these dishes. 20 hospitals with more than 500 beds located in Seoul were surveyed to obtain data for study variables. Questionnaire and a survey form were mailed. Statistical methods used in this study were descriptive analysis and Pearson product moment correlation analysis. Hospital system characteristic which was found to correlate significantly with productivity was the ratio of dish loss. As this increased, the productivity level increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.352-360
• /
• 2010

Supporting user perceptual QoE-guaranteed IP-based multimedia service such as IPTV and Mobile IPTV, we represent an efficient QoE-aware transport stream assessment schemes to apply realtime mobile IPTV's contents distorted by various network errors such as bandwidth, delay, jitter, and packet loss. This paper proposes in detail an efficient matching and QoE-aware measurement methods. The brightness of the digitized contents per each frames of transport streams is used and applied to reduced-reference method. The hybrid video quality metric is designed by QoE-indicators such as blur, block, edge busyness, and color error. We compare original with processed source to evaluate them in a high precision degree of accuracy.