• 한국자원식물학회지
• /
• 제22권3호
• /
• pp.266-272
• /
• 2009

Morphological characteristics of leaves, trichomes and acorns were investigated in 6-year-old artificial hybrids of Q. aliena ${\times}$ Q. mongolica var. crispula and Q. serrata ${\times}$ Q. mongolica var. crispula. Leaf shapes of Q. aliena ${\times}$ Q. mongolica var. crispula $F_{1}$ were obovate and resembled to that of Q. aliena. But several characters including the size of leaf and petiole and the shape of leaf base resembled to those of Q. mongolica var. crispula. In F1 hybrids, small stellate hairs distributed sparsely on the abaxial surface and their lay length was intermediate between both parents. There were no big differences on characters of nuts and cupules between both parents and $F_{1}$ hybrids. Leaf shapes of Q. serrata ${\times}$ Q. mongolica var. crispula $F_{1}$ were obovate-elliptic, and the leaf shape and leaf base and the length of petiole resembled to those of Q. mongolica var. crispula, but leaf size and serration resembled to those of Q. serrata. The number of serration in a leaf was intermediate between both parents. Small stellate hairs distributed sparsely and large single hairs were mixed on the reverse side of leaves. there were no big differences on the number and size of stellate hairs between $F_{1}$ hybrid and Q. serrata. It is able to distinguish $F_{1}$ hybrids from both parents by the size leaf size and shapes, leaf base and serration, petiole length and trichome type in the leaf.

• 한국전자파학회논문지
• /
• 제21권4호
• /
• pp.371-380
• /
• 2010

CATR(Compact Antenna Test Range)은 실내에서 반사판을 사용하여 균일 평면파를 제공하는 시험 시설이다. 반사판의 가장자리에서 발생되는 회절 전계는 균일 평면파의 리플(ripple)을 증가시키는 요인이 되기 때문에 CATR에서는 서레이션(serration)을 반사판의 가장자리에 부착하여 균일 평면파의 리플을 낮추게 된다. 일반적으로 서레이션의 회절 전계는 이중 적분으로 표현되는 프레넬 회절식(Fresnel diffraction formula)을 사용하여 해석하고, 서레이션 구조는 프레넬 회절식의 이중 적분 영역에 적용시키기 위해 푸리에 급수로 표현한다. 본 논문에서 는 새로운 shark-fin 형태를 갖는 서레이션을 사용하였고, 제안된 서레이션에 인접한 서레이션의 높이에 차이를 주는 구조를 제안하였다. 기존 삼각형 구조의 서레이션과 새로운 shark-fin 구조의 서레이션을 비교하여 제안한 shark-fin 구조의 서레이션에서 quiet zone의 크기를 보다 넓힐 수 있음을 확인하였고, 인접 서레이션의 높이에 변화를 주었을 때 동일한 높이보다 리플이 낮아짐을 확인하였다. 따라서 본 논문에서 제안한 shark-fin 형태의 높이가 다른 서레이션 구조는 CATR의 시험 영역에 리플이 낮은 균일 평면파를 제공할 수 있을 것으로 생각된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 제16회 정기총회 및 동계학술발표회
• /
• pp.256-257
• /
• 2005

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.57-66
• /
• 2006

AA5182-polypropylene sandwich sheet was manufactured, and the mechanical properties evaluation was executed in order to identify $L{\ddot{u}}ders$ band that causes fabrication process problem and especially surface roughness. To identify formability, deformation behavior, plastic strain ratio (R-value) and pole figure were measured, and texture analysis was performed. In the case of sandwich sheet, the unstable deformation behavior has decreased. As well, for sandwich sheet, A1 skin could manage the most of load, and the elongation has improved about 45% more than that of A1 skin. The plastic strain ratio of A1 skin and sandwich panel, which indicates serration behavior, was obtained from instantaneous plastic strain ratio evaluation. Also, the planar anisotropy of sandwich sheet has decreased more than that of A1 skin. According to these results, the sandwich sheet produced lightening effect and could control unstable deformation characteristic, that is, surface roughness caused by $L{\ddot{u}}ders$ band. Furthermore, it was proved that the texture control of the rolling attachment of A1 skin is necessary to improve the formability of the sandwich panel.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.192-197
• /
• 2007

The effects of immersion time in the liquid nitrogen on the behavior of aluminum alloys used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing immersion time in the liquid nitrogen, the elongation of AI 5083 alloy at cryogenic temperature decreased because of non-uniform fracture of precipitates on the grain boundary, and the serration also occurred because of discontinuous slip due to rapid decreasing of the specific heat. The mechanical properties of AI 6061 alloy at cryogenic temperature were characterized by uniformed yield strength, tensile strength and elongation regardless of the immersion time in the liquid nitrogen. These mechanical properties of aluminum alloys at cryogenic temperature were interpreted by the strength of grain boundary and the slip deformation behavior.

• Nuclear Engineering and Technology
• /
• 제48권6호
• /
• pp.1387-1395
• /
• 2016

To investigate the dynamic strain aging (DSA) behavior of Alloy 617, high-temperature tensile tests were carried out with strain rates variations of $10^{-3}/s$, $10^{-4}/s$, and $10^{-5}/s$ from $24^{\circ}C$ to $950^{\circ}C$. Five flow relationships, Hollomon, Ludwik, Swift, Ludwigson, and Voce, were applied to describe the tensile true stress-strain curves, and the DSA region was defined. In describing the tensile curves, Ludwigson's equation was superior to the other equations, and the DSA region was adequately defined by this equation as plateaus at intermediate temperatures from $200^{\circ}C$ to $700^{\circ}C$. It was identified that Alloy 617 is dominated by three types of serrations, known as Types D, A+B, and C. The activation energy values for each serration type were obtained by the Arrhenius equation. By using the obtained activation energy values, the serrated yielding map and the DSA mechanism were drawn and manifested. In addition, the relationship between the tensile strength and strain rate at higher temperatures above $700^{\circ}C$ was found to be closely related to the amounts of slip lines. In the scanning electron microscope (SEM) fractographs, there was a significant difference at the low, intermediate, and high temperatures, but almost the same to the three strain rates.

• 소성∙가공
• /
• 제17권6호
• /
• pp.429-435
• /
• 2008

In this paper, the serrated forming process is analyzed with finite element method. The seal should secure the overlapping portions of ligature, which has teeth for ligature to prevent from slipping each other after clamping. In the simulation, rigid-plastic finite element model has been applied to the serration forming process. Serration or teeth forming characteristics has been analyzed numerically in terms of teeth geometry based on different forming conditions. Analyses are focused to find the influence of different die movements and geometries on the tooth geometry, which is crucial for securing overlapping portions of ligature. Two major process variables are selected, which are the face angle and entry angle of punch, respectively. Extensive investigation has been performed to reveal the influences of different entry and face angles on the geometry of teeth formation in the simulation. Three different face angles of punch have been selected to apply to each simulation of serrated sheet forming process with every case of punch entry angles. Furthermore, tooth geometries predicted from simulation have been applied to the indention process for comparing proper tooth geometries to secure the sealing.

• 대한금속재료학회지
• /
• 제50권10호
• /
• pp.703-710
• /
• 2012

The effects of the ordering reaction on high temperature mechanical behavior is investigated by tensile tests at $2{\times}10^{-2}/s-3.3{\times}10^{-5}/s$ up to $745^{\circ}C$. The tensile deformed region is examined by differential scanning calorimeter (DSC), TEM, and high resolution neutron diffraction (HRPD). The results showed that a plateau of tensile strength appeared at $150-500^{\circ}C$ whereas the elongation minimum occurred at about $600^{\circ}C$. This suggests that the occurrence of a plateau does not cause the elongation minimum. The temperature of the elongation minimum decreases with the strain rate. HRPD results show a lattice contraction in the tensile deformed specimen at the temperature of the plateau occurring region. The plateau of tensile strength, the lattice contraction, and the occurrence of serration appeared in the same temperature region.

• Wind and Structures
• /
• 제37권1호
• /
• pp.15-23
• /
• 2023

The wake behavior of extended flat plate and serration in the trailing edge of S809 airfoil is presented in this experimental study using wind tunnel testing. The clustering of wind turbines in wind parks has recently been a pressing issue, due to the expected increase in power output and deciding the number of wind turbines to be installed. One of the prominent factors which influence the performance of the subsequent wind turbines is the downstream wake characteristics. A series of wind tunnel investigations were performed to assess the downstream near wake characteristics of the S809 airfoil at various angles of attack corresponding to the Reynolds Number Re = 2.02 × 105. These experimental results revealed the complex nature of the downstream near wake characteristics featuring substantial asymmetry arising out of the incoherent flow separations prevailing over the suction and the pressure sides of the airfoil. Based on the experimental results, it is found that the wake width and the downstream velocity ratio decrease with an increase in the angle of attack. Nonetheless, the dissipation length and downstream velocity ratio increases proportionally in the downstream direction. Additionally, attempts were made to understand the physical nature of the near wake characteristics at 1C, 2C, 3C and 4C downstream locations.

• Journal of Forest and Environmental Science
• /
• 제15권1호
• /
• pp.107-116
• /
• 1999

소나무 천연집단의 변이를 연구하기 위해 1994년 9월(月) 25~27일(日)과 10월(月)1~3일(日)강원도 지역의 13개 소나무 천연집단 [춘천시 효자동(plot 1), 인제군 신남면(plot 2), 인제군 북면(plot 3), 양양군 서면 A(plot 4), 양양군 서면 B(plot 5), 양양군 손양면(plot 6), 고성군 토성면(plot 7), 원주시 신림면(plot 8), 횡성군 둔내면(plot 9), 평창군 진부면(plot 10), 강릉시 소금강 입구(plot 11), 울진군 서면(plot 12), 평창군 미탄면 (plot 13)]을 선발하고 각 집단 별로 20개체를 대상으로 하여 침엽 및 구과의 형태적 특성에 대한 변이를 조사한 결과는 다음과 같다. 1. 침엽의 특성에서 침엽의 길이는 69.3~91.9mm이고, 0.5cm당 거치수는 25.1~28.7개 이고, 기공 열의 수는 배축변에서 4.1~6.2줄이고 향축면에서 2.9~4.6줄이었으며 집단간 및 집단내 개체간에 모두 고도의 유의성이 나타났다. 2. 구과의 특성에서 구과의 길이는 31.1~43.7mm이고, 직경은 20.0~24.1mm이었으며 집단간 및 집단내 개체간에 모두 고도의 유의성이 나타났다. 3. 배축면과 향축면의 기공열의 수는 정의 상관을 보였고, 구과의 길이와 직경간에도 높은 정의 상관이 있었으며, 거치수는 각 특성들과 부의 상관을 보였다. 4. 해안선으로부터의 거리는 침엽의 길이와 거치수와 정의 상관을 보였고, 두 면의 기공열의 수 및 구과 길이와는 부의 상관을 나타냈다. 해발고는 거치수와 정의 상관을 보였으나 두 면의 기공열의 수 및 구과 길이와는 부의 상관을 나타냈고, 침엽의 길이 및 구과 직경과는 어떠한 경향도 인정되지 않았다. 5. 평균연결법에 의한 군집 분석 결과, 거리지수 1.0에서 2개의 무리로 나누는 것이 가능하였는데, I 그룹에 plot 1, 8, 12와 13이 속하였고 II 그룹에 plot 2, 3, 4, 5, 6, 7, 9, 10과 11이 속하였다. 거리지수 0.8 에서는 II 그룹을 다시 plot 2, 3, 9와 11의 군집과 plot 4, 5, 6, 7과 10의 군집으로 나눌 수 있었다.