• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.243-248
• /
• 2008

The bean bug Riptortus clavatus Thunberg (Heteroptera: Alydidae) is an important pest, causing serious yield loss in soybean. But the information on mechanism of resistance to R. clavatus is limited. The objective of this study was to identify QTLs for R. clavatus resistance using simple sequence repeat (SSR) markers in a soybean population of recombinant inbred lines (RILs) developed from the cross PI 171451 ${\times}$ Hwaeomputkong. A genetic map from this population was constructed with a total of 136 SSR markers covering 1073.9 cM on 20 linkage groups (LGs). With 126 $F_5$ RILs, two independent QTLs for resistance to R. clavatus were mapped on LGs B1 and C2. The amount of phenotypic variation explained by these QTLs ranged from 12 to 16%. PI 171451 showed an escape response to R. clavatus. Under feeding conditions, 14.4% of RILs showed greater resistance to R. clavatus than the resistant parent. The resistance to R. clavatus in soybean from PI 171451 was incomplete and quantitatively inherited and the QTLs for resistance to R. clavatus detected in the RIL population were not significantly affected by epistatic interactions.

• Journal of Korean Society of Disaster and Security
• /
• v.7 no.1
• /
• pp.9-16
• /
• 2014

In the high water pressure construction conditions, it is important that the failures and damages occurrence in the neighboring ground and impermeable prevention methods (design and construction) for a inflow of seawater into structures. Grouting construction markets include a subway construction, a railway construction, a mountain tunnel construction, a new & reinforced construction of river & reservoir levee with big budget per every years. but, there are economic loss about design and construction management parts because that management criteria is not accurate but depends on experiences. Even though grouting technology are using vitally in the major constructions of national levels, it is still serious about the low-reliability problems and the no-criteria problems. therefor the purpose of this study is that provides the fundamental research about the neo-grouting technology for the decreasing of ground disaster in a high water pressure conditions.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.443-452
• /
• 1996

Fouling is caused by sedimentation and corrosion of polymer, heavy paraffine, chemicals, heavy organics, asphaltene, etc. in the entire chemical process of heat exchanger, boiler, desalter, etc. Fouling phenomena remains a serious operating problem which results in increased energy consumption, increased pressure drops, reduction or complete loss of products yield, and increased maintenance costs. In order to calculate the separated amounts of foulants and to control the fouling process, the predictive model is developed which is based on Scott & Magat polymer solution theory, Peng-Robinson EOS, BWR EOS, and continuous and multicomponent thermodynamics.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.17-25
• /
• 2014

Wide spread application and non-biodegradability of the poly(ethylene terephthalate) generate a huge amount of waste and disposal, posing serious environmental problems. Disposal of the PET wastes also can be thought as an economic loss of valuable chemical resources. We present various ways of feedstock recycling of PET waste to deal with environmental and economic problems. Feedstock recycling is one of promising technologies. It is based on the concept of depolymerizing the condensation polymer such as PET through solvolytic chain cleavage into low molecular products which can be purified and reused as raw materials for the production of high quality chemical products.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.194-196
• /
• 2010

A study is presented of improved road light design for drivers and pedestrians with the use of a ray- or reverse ray-tracing method. Many existing road lights are unsuitable for drivers and pedestrians because of serious problems such as glare effect or randomicity of illuminated areas. This situation has arisen because in customary design methods the emphasis has been on simple factors such as luminance or electrical power. However a high luminance or electrical power consumption, alone, do not guarantee bright and good road lighting. So we have applied a ray-tracing method to the design of a road light reflector with the goals of ensuring that illuminated objects on the road can be seen more clearly and that the illuminating light is more comfortable for the eyes of drivers and pedestrians. We have set design targets for factors such as the uniformity of lighting on the road area per road light, the shading angles and the continuous luminance uniformity on long lengths of road. For set heights of the eyes of drivers and pedestrians eyes we have calculated a design guideline for the achievement of the above design targets. Then we designed a road light reflector using the reverse ray-tracing approach. Also we have achieved the same luminance on the road with almost half the power consumption, through the reduction of lighty loss. In an ideal design optimum parameters are suggested to be a shading angle of 75 degrees and a luminance uniformity of 0.5 on the road area. This reflector performance is achievable with a 250 watt power consumption ceramic discharge metal light source.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.4
• /
• pp.1-7
• /
• 2015

The operation of the natural circulation type solar heating systems with facade integrated collector was analyzed by experiment. Two different types of flat plate solar collectors were used for these experiments. One was for the normal flat plate solar collector with the size of 1m*2m and the other was for the large size solar collector with $4m^2$(1m*4m). The experiments were carried out to investigate the effect of the series or parallel connection method on the performance of the collectors. As a result, the solar thermal system which is installed on the wall or facade would be applicable for the natural circulation type if the system design reflects various parameters, including collector connecting method(series or parallel), to provide enough vertical height between collector and storage tank, and to reduce pressure loss due to collector and piping network, etc. The natural circulation type of solar thermal system as proposed in this study can increase the system reliability by removing or minimizing the use of the components such as pump, controller, sensors which may cause serious troubles of the system for a long-time operation

• Korean Journal of Veterinary Research
• /
• v.38 no.1
• /
• pp.201-208
• /
• 1998

Piglets' diarrhea is one of the major causes of economic loss in Korean swine industry. To prevent this serious and persistant problem, we have developed systemic farm evaluation and analysis program. The program consists of the checklist and the computerized program. The items of the checklist are selected on the basis of various causative factors related with the piglets' diarrhea including sanitational status, nutritional management, or farm environment. The checklist is composed of 30 items including 6 factors on facility, 8 factors on environment, 6 factors on nutrition and 10 factors on sanitation, respectively. Minimum 1 to maximum 10 points was assigned to each item depending on level or status of farm. The scores calculated by sum of points obtained from each item could find out the problems which the farm was confronted with. To investigate the applicability of a program 150 swine farms raising over 500 heads were selected from 7 provinces throughout the country and surveyed. There were significant correlations between the piglets' diarrhea and the scores of the checklist. Based on above results we revised the checklist which consisted of 22 items including 5 factors on facility, 7 factors on environment, 3 factors on nutrition and 7 factors on sanitation. After that we composed a computerized diagram out of each point of an item which showed and indicated weak factors to be improved promptly. Our present study suggested that this newly established swine farm evaluation program would be a very efficient way to find out the problems and support the systemic control program of the piglets' diarrhea for swine farms.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1841-1847
• /
• 2008

Vibrio vulnificus is a causative agent of serious diseases in humans, resulting from the contact of wound with seawater or consumption of raw seafood. Several studies aimed at detecting V. vulnificus have targeted vvh as a representative virulence toxin gene belonging to the bacterium. In this study, we targeted the rpoS gene, a general stress regulator, to detect V. vulnificus. PCR specificity was identified by amplification of 8 V. vulnificus templates and by the loss of a PCR product with 36 non-V. vulnificus strains. The PCR assay had the 273-bp fragment and the sensitivity of 10 pg DNA from V. vulnificus. SYBR Green I-based real-time PCR assay targeting the rpoS gene showed a melting temperature of approximately $84^{\circ}C$ for the V. vulnificus strains. The minimum level of detection by real-time PCR was 2 pg of purified genomic DNA, or $10^3$ V. vulnificus cells from pure cultured broth and $10^3$ cells in 1 g of oyster tissue homogenates. These data indicate that real-time PCR is a sensitive, species-specific, and rapid method for detecting this bacterium, using the rpoS gene in pure cultures and in infected oyster tissues.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.1
• /
• pp.197-211
• /
• 2007

The power of semiconductor, Korea is continuously constructing semiconductor production line for keeping a front-runner status. however, studies and data about potential risks in semiconductor factory are still short. If fire does not initially suppressed, the fire causes a great damage. To decrease fire risk factors, in addition to fire fighting safety equipment, more important thing is how to design and construct fire protection system. The current fire protection codes about semiconductor factory come under functional law, and this law is short of consideration about particularity of factory. The existing prescriptive fire codes depending on experience compose without evident engineering verifications, thus equipments which is created by the current prescriptive fire code may bring about a variety of problems. For example, the design under the current regulation can not cope with the excessive investments, low efficiencies, and the diversifying construction designs and be applied to the quick changes of new technologies. Ergo, an optimal design for fire protection is to equip fire protection arrangements with condition and environment of production field. Manufacturing factory of semiconductors is a windowless airtight space. And for cleanliness, there exists strong flow of cooperation. Therefore, there is a need for fire safety design that meets the characteristic of a clean room. Accordingly, we are to derive smoke flow according to cooperation process within a clean room and construction plan of an optimal sensor system. In this study, in order to confirm the performance of proposed smoke-exhaust equipment and suggest efficient smoke exhaust device when there is a fire of 1MW of methane in the clean room of company H, we have implemented fire simulation using fluid dynamics computation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.52-52
• /
• 2018

Apple (Malus domestica) is one of the most economically important fruits in Korea. But virus infection has decreased sustainable production of apple and caused the serious problems such as yield loss and poor fruit quality. Virus or viroid infection including Apple chlorotic leaf spot virus (ACLSV), Apple stem pitting virus (ASPV), Apple stem grooving virus (ASGV), Apple mosaic virus (ApMV) and Apple scar skin viroid (ASSVd) has been also reported in Korea, furthermore, its damages and economic losses have increased constantly. In our research, we tried to survey virus infection for commercial nursery trees of major apple cultivars, especially dwarfing rootstocks 'M.9' and 'M.26' as well as scions. Trees were collected from 11 locations which have produced a great amount of apple nursery stocks in Korea. Infection degree was investigated in apple cultivars, 'Hongro' and 'Fuji' using RT-PCR method. In the scion of cultivar 'Hongro', infection ratio of ACLSV, ASPV and ASGV were 100%, 81.8% and 100% respectively. In the rootstock of cultivar 'Hongro', infection ratio of ACLSV, ASPV, ASGV and ApMV were 90.9%, 81.8%, 100% and 9.1% respectively. In the scion of cultivar 'Fuji', infection ratio of ACLSV, ASPV and ASGV were 81.8%, 90.9% and 100% respectively. In the rootstock of cultivar 'Fuji', infection ratio of ACLSV, ASPV, ASGV and ApMV were 81.8%, 90.9%, 100% and 9.1% respectively. Infection of ASSVd was not detected in both cultivars. From our results, it was found that most of apple rootstocks and scions had multiple infections by apple viruses which have caused economic damage in fruit production.