• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.196-199
• /
• 2001

This paper deals with current harmonics and unbalanced source voltages compensation using combined filter system. Filter system consists of a series active filter and parallel passive filters. Passive filters were a traditional method to compensate current harmonics, so those were installed in power system widely. The active filter can be a substitution to improve filtering characteristics and complement drawbacks of the passive filter. The combined system of the active power filter and passive filter can has a better compensation performances and economical goods. The series type active power filter injects compensation voltage into power system by transformers. It's compensation principle is able to applicate for voltage compensation. A new control algorithm for series active filter to compensate current harmonics and unbalanced source voltages is proposed. In the proposed algorithm, a compensation voltage for harmonic reduction is calculated directly by instantaneous reactive power theory, and a compensation voltage for unbalanced source voltage is calculated in based on a synchronous reference frame. By experiments, we show validity of proposed compensation method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.270-273
• /
• 2000

A new phase shift PWM parallel-input/series-output modularized dual converter is proposed in this paper. This converter is operated with a fixed duty ratio and its output voltage is regulated by phase shift between each module. Since the operating duty ratio of each module is fixed it is sufficient to implement a simple open loop drive circuitry for each module and the cost of total system can be much reduced. The operation of the converter is analyzed in this paper and verified by computer simulation.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권3호
• /
• pp.101-107
• /
• 2007

Indoor air quality becomes of a concern recently in view of human health. This study investigates the air diffusion performance and the air change efficiency of a classroom, when outdoor air is introduced in two different ways in addition to the heating/cooling operation of a ceiling-mounted heat pump. A CFD analysis has been performed to investigate the effect of the discharge angle of the air jets from the heat pump for both parallel and series types of outdoor air system. It is observed that the series type creates more uniform indoor environment compared to the parallel type in general. It can be concluded the discharge angle should not be larger than 40o for the parallel type, in order not to generate thermal stratification in the room.

• International Journal of Reliability and Applications
• /
• 제14권2호
• /
• pp.71-78
• /
• 2013

The problem of designing an experiment to estimate the reliability of a system that has N subsystems connected in series where each subsystem n has n $T_n$ components connected in parallel is investigated both theoretically and by simulation. An accelerated sampling sheme is introduced. It is shown that the accelerated sampling scheme is asymptotically optimal as the total number of units goes to infinity. Numerical comparisons for a system that has two subsystems connected in series where each subsystem has two components connected in parallel are also given. They indicate that the accelerated sampling scheme performs better than the batch sequential sampling scheme and is nearly optimal.

• Structural Engineering and Mechanics
• /
• 제6권8호
• /
• pp.901-919
• /
• 1998

Most reliability-based analyses focus on the reliability of the individual components of a structure. There are many advantages to examining the components in combination as an entire structural system. This paper illustrates an algorithm used in the computer program RELSYS (RELiability of SYStems) which computes the system reliability of any structure which can be modeled as a series-parallel combination of its components. A first-order method is used to initially compute the reliability of each individual component. The system reliability is computed by successively reducing the series and parallel systems until the system has been simplified to a single equivalent component. Equivalent alpha vectors are used to account for the correlation between failure modes during the system reduction process.

• Computational Structural Engineering : An International Journal
• /
• 제1권1호
• /
• pp.71-80
• /
• 2001

A reliability approach to evaluate structural performance has gained increased acceptability and usage over the past two decades. Most reliability analyses are based on the reliability of an individual component without examining the entire structural system. These analyses often result in either unnecessary repairs or unsafe structures. This study uses examples of series, parallel, and series-parallel models of structural systems to illustrate how the component reliabilities affect the reliability of the entire system. The component-system reliability interaction can be used to develop optimum lifetime inspection and repair strategies for structural systems. These examples demonstrate that such strategies must be based on the reliability of the entire structural system. They also demonstrate that the location of an individual component in the system has a profound effect on the acceptable reliability of that component. Furthermore, when a structure is deteriorating over time, the reliability importance of various components is a1so changing with time. For this reason, the most critical component in the early life of the structure may not tie the most critical later.

• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.405-412
• /
• 2004

본 논문에서는 1차 측이 20m이상의 긴 트랙케이블(Track Cable)로 2차 측은 큰 에어 갭(Air-gap)을 갖는 픽업코일(Pick-up Coil)로 구성되어 있는 비접촉 전원에 대해서 서술하였다. 이러한 비접촉 전원은 1차 측 누설 인덕턴스가 자화 인덕턴스보다 크기 때문에 커플링이 좋지 않아 1차 측의 에너지를 2차 측으로 효율적으로 전달 할 수 없다. 이와 같은 문제점을 개선하기 위하여 본 논문에서는 직렬공진 컨버터, 병렬공진 컨버터 그리고 직ㆍ병렬공진 컨버터(SPRC)의 주 회로를 해석하였고, 각 회로에 대한 전압이득 특성을 비교 검토하였다. 그리고 10kW 직ㆍ병렬공진 컨버터(SPRC)에 대한 실험결과를 서술했다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.902-907
• /
• 2002

An equivalent electroacoustic circuit approach of estimating the sound absorption coefficient for parallel perforated plate system is proposed. The proposed approach is validated by comparing the calculated absorption coefficients of a parallel single layer perforated plate system with the values measured by the two-microphone impedance tube method for various porosity and the number of perforated plate. The sound absorbing performances of parallel and series perforated plate systems are compared and discussed from a standpoint of frequency bandwidth with sound absorption. The proposed approach is further extended to the parallel double layer perforated plate system.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 추계학술대회
• /
• pp.399-404
• /
• 2000

Redundancy allocation problems have been considered at single-level systems and it may be the best policy in some specific situations, but not in general. With regards to reliability, it is most effective to allocate the lowest objects, because parallel-series systems are more reliable than series-parallel systems. However, the smaller and tower in the system an object is, the more time and accuracy are needed for duplicating it, and so, the cost can be decreased by using modular redundancy. Therefore, providing redundancy at high levels like as modules or subsystems, can be more economical than providing redundancy at low levels or duplicating components. In this paper, the problem in which redundancy is allocated at all level in a series system is addressed, a mixed integer nonlinear programming model is presented and genetic algorithm is proposed. An example illustrates the procedure.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권1호
• /
• pp.1-8
• /
• 2001

Redundancy allocation problems have been considered at single-level systems and it may be the best policy in some specific situations, but not in general. With regards to reliability, it is most effective to allocate the lowest objects, because parallel-series systems are more reliable than series-parallel systems. However, the smaller and lower in the system an object is, the more time and accuracy are needed for duplicating it, and so, the cost can be decreased by using modular redundancy Therefore, providing redundancy at high levels like as modules or subsystems, can be more economical than providing redundancy at low levels or duplicating components. In this paper, the problem in which redundancy is allocated at all level in a series system is addressed, a mixed integer nonlinear programming model is presented and a genetic algorithm is proposed. An example illustrates the procedure.