• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.355-363
• /
• 2012

A series of poly(hydroxyamide)s (PHAs) having trifluoromethyl group were prepared by direct polycondensation of aromatic diimide-dicarboxylic acids with 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane by thionyl chloride and triethyl amine in N-methyl-2-pyrrolidinone (NMP). The PHAs exhibited inherent viscosity in the range of 0.54-0.96 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs were readily soluble in a variety of organic solvents, whereas the polybenzoxazoles (PBOs) were quite insoluble except partially soluble in sulfuric acid. PHAs were converted to PBOs by thermal cycling reaction with heat of endotherm. The maximum weight loss temperature of the PHAs occurred in the range of $559-567^{\circ}C$. The PBOs showed relatively high char yields in the range of 47-59%. Pyrolysis Combustion Flow Calorimeter (PCFC) results of the PBOs showed 12-19 W/g heat release rate (HRR), and 2.7-3.6 kJ/g total heat release (total HR). The HRR of PBO 1 showed the lowest value of 12 W/g, which was 37% lower than that of PBO 3 (19 W/g).

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.5-15
• /
• 2011

This paper presents two analysis methods for characterizing the non-linear finite strain consolidation behavior of highly deformable dredged soil deposits along with the fundamental parameters obtained in the companion paper; that is, the zero effective stress void ratio, the non-linear relationships of void ratio-effective stress and void ratio-hydraulic conductivity. The simplified Morris's analytical solution (2002) and the widely recognized numerical program, PSDDF (primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill) for both single and double drainage conditions are adopted in this paper to verify a series of laboratory experiments for self-weight consolidation of the Incheon clay and Kaolinite. The comparisons show that the analysis methods proposed herein can properly simulate the long-term non-linear finite strain consolidation behavior for dredged soils in the field. In addition, a case study for the artificial Craney Island has been conducted to illustrate the importance of obtaining appropriate non-linear finite strain consolidation parameters and the applicability of PSDDF in promoting dredged soil disposal.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.169-178
• /
• 2000

Perovskite oxide catalysts doped on porous alumina beads are prepared in a citric acid solution. To investigate the applicability of the catalysts to the hot gas cleanup, a series of experiments on the reduction characteristics of $NO_x$ by CO as a reducing agent are carried out in a packed bed reactor containing the catalysts. Parameters tested are the operating temperature and $CO/NO_x$ molar ratio. It is found that mixed complex oxides of $La_{0.5}Sr_{0.5}CoO_3$, $SrAl_{12}O_{19}$ and $LaAl_{11}O_{18}$ are uniformly distributed on the alumina beads. The conversion efficiency of $NO_x$ by CO sharply increases with the operating temperature up to $700^{\circ}C$ and then approaches 100% when $CO/NO_x$ molar ratio is greater than 1.0. The conversion efficiency of $NO_x$ is maintained by over 98% during a continuous operation for 23 hours at $800^{\circ}C$ and space velocity of $10700hr^{-1}$.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.780-788
• /
• 1995

The purpose of this study was to compare the apical seal following root canal shaping by different methods. From fourty extracted mandibular 1st and 2nd molars, fourty mesial roots whose canals have some degree of curvature were selected. The mesiobuccal root portion including mesiobuccal portion of a crown was sectioned in each molar. After access cavity preparation for the mesiobuccal canal, working length was determined with # 10 K-file. The sectioned roots were implanted in acrylic resin block and randomly divided into four groups. The canals of group I were shaped by step-down/balanced force, group II by stepdown/step-back, group III by step-back and group IV by conventional method. All of the shaped canals were obturated by Thermafil method and access cavities were filled with IRM. The roots were removed from acrylic resin block and placed in 100 % humidity for 7days. Except the root surfaces of apical 2mm, the root surfaces were nail-varnished 3 times. After the roots were placed in 700 torr vacuum pressure for 15 minutes, they were immersed in 2% methylene blue solution for 4 days. Nail varnishes were removed with acetone. After that, the roots were decalcified in 5 % nitric acid and dehydrated with alcohol series. Transparent specimens were made by methyl salicylate and the quality of apical seal was assessed by measuring the leakage linearly. The results were as follows. 1. The leakage in canals shaped by step-down/balanced force method was significantly less than that in canals shaped by step-back method(P<0.05) and was less but not statistically than that in canals shaped by step-down/step-back method (P>0.05). 2. The leakage in canals shaped by step-down/step-back method was less than that in canals shaped by step-back method, but there was no statistical significance(P>0.05). 3. The leakage in canals shaped by conventional method was significantly more than that in canals shaped by step-down/balanced force, step-down/step-back and step-back method (P<0.05).

• Membrane Journal
• /
• v.8 no.2
• /
• pp.77-85
• /
• 1998

To treat effectively EDIR (electrodeposition ion removal) wastewater in terms of CO$_{Mn}$ 1,500~2,000 ppm generated from aluminum painting process, a RO (reverse osmosis) process was designed and installed to recover and reuse the concentrated solvent sent back to the electrocodeposition tank while the permeate reused as rinse water. A RO system in which three polyamide-spiral wound modules ($102\Phi \times 1,016L$ mm) connnected in series had been running to treat 20 m$^3$ in waste volume in 3 days batch operation at the condition of system recovery of 30 %, applied pressure 11.5 $kg_f/cm^2$ and room temperature. During 42 hours continuous operation leading to 5-fold decrease in waste volume, nearly constant permeation flux of 390 l/m$^2$-hr was maintained and the permeate with average CO$_{Mn}$, 300 ppm was obtained which could be used for washing the remaining paint solution in ion-exchange tower instead of demineralized water. Also COD$_{Mn}$ rejection as a function of running time was observed to be in the range of 78~87 % and the observed solvent rejections for ethyl cellusolve, buthyl cellusolve and n-butanol were 79 %, 87 % and 70 %, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.344-351
• /
• 2002

Chemical speciation and transport of heavy metals in soil environment could be controlled by humic acid. In order to understand the mechanism on competitive adsorption of Cd and Cu on the surface of humic acid extracted from peat, the charge development of humic acid were investigate through a batch adsorption experiment with a series of different background electrolytes levels. The competitive adsorption of Cd and Cu to the humic acid were estimated according to the model using the proton binding constant obtained from the above batch test. The affinity of Cu to the carboxyl group on the humic acid was higher than that of Cd, but the affinity to the phenolic group was lower than to the carboxyl group. It seems that the amount of adsorbed Cd and Cu could be estimated using the proton binding constant obtained from a solution with single background ion. However, it is difficult to interpret the competitive adsorption of Cd and Cu with the constant for single background ion.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.73-84
• /
• 2010

We studied the geological occurrence, associated minerals, mineralogical properties and formation process of tremolites from two abandoned asbestos mines, Jungang (Sinsuk) and Daebosuksan, located in Boryoung area, Chungnam. Morphologically different tremolites such as long fibrous, needle-like, bladed and prismatic forms coexisted. Fibrous tremolite, known for its high toxieity to human health, was systematically analyzed by polarized light microscopy and scanning electron microscopy. The average length of tremolite fibers was 31.2 ${\mu}m$ although the maximum length of some asbestos was 210.0 ${\mu}m$. The average width and aspect ratio were 1.6 ${\mu}m$ and 19.9, respectively. Tremolite showed inclined extinction in the range of 6.1~20.2$^{\cric}$. X-ray diffraction patterns were slightly different between fibrous (asbestiform) and prismatic (non-asbestiform) tremolites. EPMA analysis of tremolites in the study area indicated extremely high Mg content with very low Fe content, close to the composition of tremolite in end-member in the tremolite-actinolite solid solution series. The formational conditions of asbestiform and non-asbestiform tremolite appear to be different. Asbestiform tremolite was estimated to have been formed in later stage.

• The Journal of Internal Korean Medicine
• /
• v.30 no.1
• /
• pp.107-118
• /
• 2009

Objectives : This study was aimed to investigated the effect of Yijin-tang on gastric motility and its mechanism of action in normal intact and partial pyloric obstructed rats. Methods : Gastric emptying was measured by the number of glass beads expelled from the stomach (containing one hundred of glass beads. ${\phi}1mm$) in 1 hour or 2 hours after glass beads and test drugs (normal saline. Yijin-tang 90mg/kg. Yijin-tang 270mg/kg) administration in normal intact and partial pyloric obstructed rats. In another series of experiments to evaluate the mechanism of Yijin-tang 270mg/kg under delayed conditions, normal intact rats were treated with atropine sulfate (1mg/kg,s.c.), cisplatin (10mg/kg,i.p.), quinpirole HCI (0.3mg/kg,i.p.) and NAME (NG-nitro-L-arginine methyl ester. 75mg/ kg,s.c.), respectively. Partial pyloric obstructed rats were modified by wrapping the nonabsorbable rubber ring (D :6mm, W:4mm, T: 1mm) around the 1st portion of the duodenum for 8 weeks. The myoelectrical activity of the gastric smooth muscle was recorded by a bipolar electrode placed at the abdominal surface in normal intact and partial pyloric obstructed rats. The gastric myoelectrical activity was measured for 30 minutes before and after orogastric administration of each solution (normal saline, Yijin-tang 270mg/kg) and expressed as dominant frequency, percent of normogastria and power ratio. Results : Yijin-tang improved gastric emptying more than normal saline in normal intact(p<0.001) and partial pyloric obstructed rats(p=0.002). Under the delayed gastric emptying induced by atropine sulfate, cisplatin, quinpirole HCI and NAME. Yijin-tang enhanced gastric emptying significantly in the cisplatin treated group(p<0.001). but didn't in other treated groups. Administration of Yijin-tang 270mg/kg has no significant effect on the myoelectrical activity of the gastric smooth muscle in both normal intact rats and partial pyloric obstructed rats. Conclusions : Yijin-tang seems to stimulate the gastric motility through suppressing the 5HT3 receptor and promoting the antroduodenal flow. We expect that Yijin-tang would be effective especially in dysmotility-like functional dyspepsia with partial pyloric obstruction or the side effects of cisplatin such as nausea, vomiting, abdominal discomfort, and delay of gastric emptying.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.44-52
• /
• 2003

In this work dynamic heat transfer in a CPFS (cable penetration fire stop) system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealant. Dynamic heat transfer in the fire stop system is formulated in a parabolic PDE (partial differential equation) subjected to a set of initial and boundary conditions. First, the PDE model is divided into two parts; one corresponding to heat transfer in the axial direction and the other corresponding to heat transfer on the vertical planes. The first PDE is converted to a series of ODEs (ordinary differential equations) at finite discrete axial points for applying the numerical method of SOR (successive over-relaxation) to the problem. The ODEs are solved by using an ODE solver In such manner, the axial heat flux can be calculated at least at the finite discrete points. After that, all the planes are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The initial condition of each finite element can be obtained from the above solution. The heat fluxes on the vertical planes are calculated by the Galerkin FEM (finite element method). The CPFS system was modeled, simulated, and analyzed here. The simulation results were illustrated in three-dimensional graphics. Through simulation, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable stream, and that dynamic heat transfer through the cable stream was one of the most dominant factors, and that the feature of heat conduction could be understood as an unsteady-state process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.212-219
• /
• 2000

This study was conducted to investigate methane emission among nitrogen fertilizers in paddy soil(Jeonbug series, occurring on fluvio-alluvial plain). The application rates of rice straw was $5,000kg\;ha^{-1}$ with $110kg\;N\;ha^{-1}$ as chemical fertilizer. It was found that the methane flux tended to be lower in ammonium sulfate than in urea and latex coated urea(LCU). The seasonal variations of the methane emission flux was high during the heading stage of the rice plant. Methane concentration in the soil solution was the highest at 5cm depth, but decreased with upper and lower depth. Methane emission under rice straw application was $0.265g\;m^{-2}\;day^{-1}$ by urea application. $0.207g\;m^{-2}\;day^{-1}$ by ammonium sulfate application, $0.318g\;m^{-2}\;day^{-1}$ by latex coated urea(LCU) application while methane emission under non rice straw application was $0.192g\;m^{-2}\;day^{-1}$ by urea application, $0.165g\;m^{-2}\;day^{-1}$ by ammonium sulfate application, $0.179g\;m^{-2}\;day^{-1}$ by latex coated urea(LCU) application.