• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.170-170
• /
• 2003

This paper introduces an improved pulse generator using power semiconductors and L-C circuit. The proposed circuit consists of the series connected boost converter structure. In the presented circuits, high voltage pulse is generated by series-connection of capacitors and IGBTs. The charging of capacitors and voltage balance of IGBTs are obtained automatically. To verify the proposed circuit, 1.8㎸, 40A pulse generator is manufactured and tested.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.159-165
• /
• 2021

YSZ based anode supported solid oxide fuel cells (SOFCs) were prepared, and two cells with different electrolyte thicknesses were connected in series for the simulation of a cell-imbalanced fuel cell stack. Pure YSZ cells in a series connection exhibited a rapid degradation when a thick electrolyte cell was operated under a negative voltage. On the other hand, ceria added-YSZ cells in a series connection were stable under similar operating conditions, and the power density and impedance were about the same as those before tests. The improved stability was due to the reduction of internal partial pressure in the electrolyte by locally increasing the electronic conduction. Thus, we propose a new protection method, i.e., the local addition of ceria in the YSZ electrolyte, to extend the lifetime of a cell-imbalanced SOFC stack.

• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.99-104
• /
• 1999

최근 산업이 대규모화함에 따라 고압 전력 변환 장치의 필요성이 증가하고 있고, 이에 따라 전력용 반도체 소자의 직렬 구동이 많이 이용되고 있다. 소자의 직렬 구동은 소자간에 적절한 전압 분배가 이루어져 개별 소자에 정격이상의 과전압이 인가되는 것을 방지하는 것이 큰 관건이다. 또한 고전압 회로에서는 부유 인덕턴스에 의한 소자의 과전압도 방지하여야 한다. 본 논문에서는 직렬 연결된 IGBT의 턴-오프 과도상태시 컬렉터 전압 기울기 조절로 안정된 전압 분배와 과전압을 방지하는 새로운 게이트 구동기법을 제안한다. 제안하는 게이트 구동기법은 컬렉터 전압을 검출하여 능동적으로 게이트 신호를 제어함으로써 과전압을 제한한다. 새로운 IGBT 게이트 구동회로를 제작하고 직렬 연결된 IGBT 회로에 적용하여 게이트 구동기법의 타당성을 검증하였다.

• 대한수학회보
• /
• 제29권2호
• /
• pp.245-256
• /
• 1992

In this article, we study the behavior of half integral weight thetaseries under theta operators. Theta operators are very important in the study of theta-series in connection with Hecke operators. Andrianov[A1] proved that the space of integral weight theta-series is invariant under the action of theta operators. We prove that his statement can be extened for half integral weight theta-series with a slight modification. By using this result one can prove that the space of theta-series is invariant under the action of Hecke operators as Andrianov did for intrgral weight theta-series [A1].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.806-808
• /
• 2004

The series and parallel connection is essential for increasing power ratings of resistive type for fault current limiters. To increase voltage class, components are connected in series and to increase current level to the nominal value, they are connected in parallel. There are two ways to connect components in series and parallel. First, connected in series and then the module connects to the parallel. Second, connected in parallel and the module connects to the series. We have studied for the two ways. In this paper, we particularly investigated way to connect components in parallel first This way has the advantage of inducing effective simultaneous quench without any other devices, for example, the thing which is inducing magnetic field to the limiting and shunt resistors. And also we studied for the endurance of component which is patterned to the bi-spiral for prospective fault current. It is very important to understand this, because SFCL will use as the only device to decrease burden of circuit breaker. As experimental results, limiting component patterned to bi-spiral endures fault current up to 30kA and it works well, in parallel to series connection,

• Structural Engineering and Mechanics
• /
• 제50권6호
• /
• pp.741-754
• /
• 2014

The conventional PHC pile-footing connection is the weak part because the surface area and stiffness are sharply changed. The Composite PHC pile reinforced with the transverse shear reinforcing bars and infilled-concrete, hereafter ICP pile, has been developed for improving the flexural and shear performance. This paper investigates the cyclic behavior and performance of the ICP pile-footing connection. To investigate the behavior of the connection, one PHC and two ICP specimens were manufactured and then a series of cyclic loading tests were performed. From the test results, it was found that the ICP pile-footing connection exhibited higher cyclic behavior and connection performance compared to the conventional PHC pile-footing connection in terms of ductility ratio, stiffness degradation and energy dissipation capacity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-5
• /
• 2008

This paper presents a hybrid winding connection method for torque characteristics improving of a traction SRM. In order to get a high torque in wide speed range and torque ripple reduction, series and parallel winding connection are changed according to operating speed. From the analysis of torque character operation mode and efficiency, the proposed control scheme is verified.

• 과학교육연구지
• /
• 제38권2호
• /
• pp.331-343
• /
• 2014

전지의 연결방법에 따른 전류의 특성에 대한 초등교사들의 오개념 유형과 그 일관성에 대하여 조사되었다. 초등교사들의 전지의 연결방법에 따른 전류의 특성에 대한 오개념은 3가지 유형으로 나타났다. 14명의 초등교사들을 대상으로 한 이 연구에서, 전지들의 직렬연결과 병렬연결시 전류의 특성을 연결하는 전지의 수에 초점을 맞추는 유형에는 2명의 초등교사가, 전지의 직렬연결에 대한 개념과 병렬연결에 대한 개념을 혼동하는 유형에는 8명의 초등교사가, 그리고 전지의 직렬연결과 병렬연결에 대한 개념을 저항의 직렬연결과 병렬연결에 대한 개념으로 혼동하는 유형에는 4명의 초등교사가 분포하였다. 초등교사들은 전지의 연결에 대한 학습개념이 적용되는 상황에서 뿐만 아니라 분화개념이 적용되어야 하는 상황에서도 그들의 오개념 유형을 일관성 있게 적용하고 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.472-477
• /
• 2017

In this work, the current limiting and recovery characteristics of a flux-lock type superconducting fault current limiter (SFCL) with series connection of two coils were effectively improved by adding a third winding into the conventional flux-lock type SFCL with series connection of two coils. To confirm the contribution of the third winding to the current limiting and recovery characteristics of this type of the SFCL, short-circuit testing was carried out with consideration of the third winding, and the effect of the third winding on the current limiting and recovery characteristics was examined by comparative analysis of the amplitude of the limited fault current and the power burden of the high-TC superconducting (HTSC) element comprising the SFCL. Through the analysis of both the limiting impedance and the operational current as the main design parameter of the SFCL, the improved current limiting and recovery characteristics of the flux-lock type SFCL using the third winding could be verified.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.249.2-249.2
• /
• 2015

Connecting two or more sub-cells is a simple and effective way of improving power conversion efficiency (PCE) of solar cells, and the theoretical efficiency of this tandem cell is known to reach 85~88% of the sum of the sub-cell's efficiencies. There are two ways of connecting sub-cells in the tandem structure, i.e. parallel and series connection. The parallel connection can increase the short circuit current (Jsc) and the series connection can increase the open circuit voltage (Voc). Although various tandem structures have been studied, the full use of incident light and optimization of cell efficiency is still limited. In this work, we designed series tandem solar cells consisting of lead sulfide (PbS) quantum dots/zinc oxide-based QDSC and zinc phthalocyanine (ZnPc)/C60-based small molecule OSCs. It is expected that the loss of the incident light is minimized because the absorption range of the PbS quantum dots and ZnPc is significantly different, and the Voc increases according to the Kirchhoff's law.