• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.53-60
• /
• 2009

Purpose: Primary osteoarthritis on the elbow is the result of the growth of osteophytes and contracture of the capsule. It often causes disability on joint motion and pain while exercising. As arthroscopy has developed, the arthroscopic diagnosis and treatment of the elbow have recently become more generalized as well. Therefore, we like to report on arthroscopy for treating elbow arthritis and its results. Materials and Methods: This study includes 23 cases of elbow arthritis that were seen between 2005 June to 2007 June and these patients didn't response to conservative treatment. From this we excluded 18 cases that underwent arthroscopic surgery and among these 18 cases, 6 cases underwent ulnar nerve transfer. The average observation time was 21.3 months and the average age was 48.4 years (range: 22-66 years). The pre and post operative pain was evaluated with using the Visual Analogue Scale (VAS) and functional evaluation was done with using the Mayo elbow Performance Score (MEPS) with the range of joint motion. Results: The VAS score at the last follow up was significantly decreased from 3.4 to 1.9 compare to the preoperative score. The range of joint motion was improved by 25 (0-40) to 8.5 (0-20) in extension and 101.7 (80-140) to 125.2 (85-140) in flexion (p<0.05). The MEPS always showed significant improvement by showing an increase from 65.4 (40-85) to 87.9 (55-100). However, 3 cases showed a decreased range of motion after the operation. One case showed ulnar nerve symptoms after surgery. Conclusion: An arthroscopic procedure can treat the pathologic processes associated with arthritis of the elbow and it was safe and effective in this series.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.113-118
• /
• 2016

This experiment was conducted to identify the variations in inorganic nutrients and plant growth in millet (Panicum miliaceum L.) due to soil salinity. The soil series was Munpo and soil texture was silt loam. The experimental soil was amended so that the soil had salinities of $0.8dS\;m^{-1}$, $1.6dS\;m^{-1}$, $3.2dS\;m^{-1}$ and $4.8dS\;m^{-1}$. Millet was transplanted 15 days after sowing. As soil salinity increased, the degree of reduced growth was in the order of seed production > root dry matter > plant dry matter > culm length > tiller number > stem thickness > Panicle length. Seed production was decreased to 18.9% in soil salinity of $1.6dS\;m^{-1}$, 36.9% in of $3.2dS\;m^{-1}$, and 50.7% in EC of $4.8dS\;m^{-1}$. Root dry matter decreased to 35.8% in EC of $3.2dS\;m^{-1}$, and to 40.5% in EC of $4.8dS\;m^{-1}$. As soil salinity increased, Total nitrogen content increased in all aboveground parts, roots and seeds. However, There was no difference in CaO, $P_2O_5$, $K_2O$ and, MgO in soils of different salinity. On the other hand, $Na_2O$ content was higher in the order roots> shoots> seed, and in the case of roots, $Na_2O$ content increased to 1.02% in soil salinity of $4.8dS\;m^{-1}$. However, up to soil salinity of $1.6dS\;m^{-1}$, the $Na_2O$ content of the seed was similar to that in plant grown in the Control conditions($0.8dS\;m^{-1}$). In conclusion, taking into consideration economic factors, millet could be cultivated in soil with salinities of up to approximately $1.6dS\;m^{-1}$, and seed produced from reclaimedland would be suitable for human consumption.

• Development and Reproduction
• /
• v.10 no.4
• /
• pp.271-275
• /
• 2006

The objective of this study was to examine the early growth of haddock, Melanogrammus aeglefinus larvae from a series of reared specimens for provide information to developmental biology and more information on the aspect of aquaculture in the larvae of this species. Larvae were reared in the laboratory and sampled periodically for developmental study until 67 days after hatching. An increase in total length of fish indicated continuous growth, described by the growth expression of the type $TL=3.5374e^{0.0536X}(r^2=0.8759$, where TL is total length and X is at days after hatching) and $BW=0.0002e^{0.1858X}(r^2=0.8671$, where BW is body weight and X is at days after hatching), respectively. Pattern of body depth and pectoral fin length are instantaneous growth which expression of the type $BD=0.3545e^{0.0778X},\;r^2=0.9563$(where BD is body depth and X is at days after hatching) for body depth growth and the type $PL=0.0111e^{0.1591X},\;r^2=0.9194$(where PL is pectoral fin length and X is at days after hatching) for pectoral fin length growth. The relationship of body depth and total length expressed as $BD=0.2397X-0.5735(r^2=0.9957$, where BD is body depth and X is total length), and pectoral fin length and total length is $PL=0.1929X-1.3767(r^2=0.9882$, where PL is pectoral fin length and X is total length) pectoral fin length against body depth simultaneously recorded for juvenile haddock(PL=0.8117BD-0.9718, $r^2=0.9814$, where PL is pectoral fin length and BD is body depth). Relationship of body depth and body weight was expressed the type of $BD=-9.4734X^2+19.046X+1.3672,\;r^2=0.941$(where BD is body depth and X is body weight), and pectoral fin length and body weight expressed the type of $PL=6.379X^2+14.023X+0.3774,\;r^2=0.9494$(where PL is pectoral fin length and X is body weight). From this point view, growth characteristics of juvenile haddock in this experiment may be useful to establish a successful culture technique for rearing larval haddock.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.1-25
• /
• 2015

"Magical girl" is one of many popular genres that are watched in Japanese animation. The characteristics of "Magical girl" genre shows that most main heroine as the girl in young age, and this young girl play her role as a character with supernatural power. The majority in population of Japanese animation consumers were men. However, women began to become this population of Japanese animation consumers with the beginning of "Magical girl" genre, which also became a cause for the birth of "Shojo anime". The first "Shojo anime", as well as the first animation of "Magical girl" genre in Japan was , and this piece made a great hit when it was broadcasted. Since the great hit of , new pieces of animation in "Magical girl" genre has broadcasted through television continually, making other great hits also with in 1982 and< Sailor Moon> in 1992. Discussing of which, made not only a great hit in Japan, but worldwide as well, that its new season of TV series, , is broadcasted in 2014. "Magical girl" genre was loved by viewers of Japanese animation for a long time, and it is still broadcasted regularly today. In observation of pieces in "Magical girl" genre, magical girls who appear as a main character either fight for the world they live in, or take on an adventure, or take an action according to their idealistic purpose. However, the magical girls who appear in take an action not for the peace of their world, but rather for their own benefits and purposes. In , magical girls fight against the witches and their familiar spirits, which end up in a horrible conclusion. The witches who magical girls fought against were not already the witches in the beginning, but in fact were the other magical girls who took their action in the past. It Magical girls in present time were having witch hunt against the witches, who were once another magical girls in the past. Unlike traditional "Magical girl" genre, where witches and magical girls were used to be an that magical girls end up turning into witches. Witches did not exist in the beginning, but rather someone had to be one, to be hunted down in witch hunt. The cause of witch hunt did not exist in the beginning, but rather the ones had to be tagged as witches to be hunted down. Therefore, this paper is written to discuss an existence of witch in research of its historic origin of witch hunt, and on the witches appear in .

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.281-302
• /
• 2014

Human beings have advanced to release instinctive desire. Among the human desires, sexual desire is classed as a basic desire with appetite and has been expressed in many ways from prehistoric times to present. Despite the social and ethical restriction, expression of sexual image has been evolved with change of time and medium's development. Thanks to inventing the photograph technique, Change of pornographic image has showed a dramatic aspect since early 20th century. The video which delivers message more directly than the picture boosted this change, and the animation has experimented the expression methods and techniques numerously exceeding the limit of realistic image which reappeared by the device. In this thesis, I want to discuss how human beings express sexual desire in animation based on society's sex culture, and analyzed Japanese pornographic animation as its obvious cases. Japanese pornographic animation should be interpreted as the result of culture and society system's history. Through Heian, Edo and early Meiji period, Japanese sex culture has been kept very openly and preposterously. Transformation, metamorphosis, pedophilia, tentacle sex and exposure of specific body parts that are frequently appear in Japanese animation can be interpreted by ancient Japanese open sex culture like Wakashu, polygamy, sleeping in mixed sex group and pederasty. These Japanese odd sex culture is hard to find elsewhere and settled as intrinsic sexual expression in Japanese animation. This situation was institutionally severed by European Modernization's force at the end of World War II in 20th century. However, it seems they have been keeping their influence in a proper form until now. In this study, I discussed that pornographic animation should be interpreted in a frame of cultural phenomenon by researching the series of procedure that ancient Japanese open sex culture has been changed by the system. Sexuality which is found in general Japanese animation was started from their history, and the dichotomous expression about women can be understood that it is bent by institutionally regulated sexual opinion. Japanese history and culture can be understood that it is transformed to the dichotomy that are simultaneously according freedom of eroticism to the pornographic animation, and the fear and irresistible temptation about the woman's body as the other.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.341-348
• /
• 2010

The basic principle of fry drying process of sludge lies in the rapid pressure change of sludge material caused by the change of temperature between oil and moisture due to the difference of specific heat. Therefore, the rapid increase of pressure in drying sludge induces the efficient moisture escape through sludge pores toward heating oil media. The object of this study is to carry out a systematic investigation of the influence of various parameters associated with the sludge fry drying processes on the drying efficiency. To this end, a series of parametric experimental investigation has been made together with the numerical calculation in order to obtain typical drying curves as function of important parameters such as drying temperature, sludge diameter, oil type and sludge type. In the aspect of frying temperature, especially it is found that the operation higher than $140^{\circ}C$ was favorable in drying efficiency regardless of type of waste oil employed in this study. The same result was also noted consistently in the investigation of numerical calculation, that is, in that the sludge particle drying was efficiently made over $140^{\circ}C$ irrespective of the change of particle diameter. As expected, in general, the decrease of diameter in sludge was found efficient both experiment and numerical calculation in drying due to the increased surface area per unit volume. In the investigation of oil type and property, the effect of the viscosity of waste oil was found to be more influential in drying performance. In particular, when the oil with high viscosity, a visible time delay was noticed in moisture evaporation especially in the early stage of drying. However, the effect of high viscosity decreased significantly over the temperature of $140^{\circ}C$. There was no visible difference observed in the study of sludge type but the sewage sludge with a slightly better efficiency. The numerical study is considered to be a quite useful tool to assist in experiment with more detailed empirical modeling as further work.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2009

This research was performed to assess a Fenton-like oxidation using naturally present iron in the field to treat remained oils throughout silty clay residues which finally resided even after a series of soil washing process. Biodegradability was thus tested for reaction products to investigate a possible treatment of the Fenton-like oxidation coupled with a biological treatment process. For those purposes, two types of field soil samples (e.g., dewatered cake after conditioning with a polymer and not-dewatered residue) were tested to remove TPH by adding the various concentration of hydrogen peroxide ($H_2O_2$). Moreover the biodegradability of treated samples was observed based on the ratio of $BOD_5/COD_{Cr}$ after Fenton-like oxidation. The Highest removal of TPH was at 1% of hydrogen peroxide ($H_2O_2$) when hydrogen peroxide ($H_2O_2$) was continuously injected for a period of time rather than that of spot introduction with the same amount of it. For the dewatered cake, TPH was effectively treated when the ratio of solid and water was mixed at 1 : 2. Employing cooking oil could increase solubility of TPH due to enhanced surface-active escalating TPH desorption from silty clay. Nonetheless, the biodegradability was decreased as long as the oxidation duration being extended regardless of operational conditions. It was therefore proved that Fenton-like oxidation using $H_2O_2$ and natural iron minerals was able to remove adsorbed oils in silty clay but the removal efficiency of TPH was low. And if a biological treatment process followed after Fenton-like oxidation, microorganisms would need enough time for acclimation.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.115-123
• /
• 2013

Stoker type incinerator is one of the most popular one used as municipal solid waste (MSW) incineration because, in general, it is quite suitable for large capacity and need no preprocessing facility. Nowadays, however, since the combustible portion of incoming MSW increases together with the decrease of the moisture content due to prohibition of directly burying food waste in landfill, the heating value of waste is remarkably increasing in comparison with the early stage of incinerator installation. Consequently, the increased heating value in incinerator operation causes a number of serious problems such as reduction of waste amount to be burned due to the boiler heat capacity together with the significant NO generation in high temperature environment. Therefore, in this study, a series of numerical simulation have been made as parameters of waste amount and the fraction of moisture in air stream in order to investigate optimal operating condition for the resolution of the problems associated with the high heating value of waste mentioned above. In specific, a detailed turbulent reaction flow field calculation with NO model was made for the full scale incinerator of D city. To this end, the injection method of moisturized air as oxidizer was intensively reviewed by the addition of moisture water amount from 10% and 20%. The calculation result, in general, showed that the reduction of maximum flame temperature appears consistently due to the combined effects of the increased specific heat of combustion air and vaporization heat by the addition of water moisture. As a consequence, the generation of NOx concentration was substantially reduced. Further, for the case of 20% moisture amount stream, the afterburner region is quite appropriate in temperature range for the operation of SNCR. This suggests the SNCR facility can be considered for reoperation. which is not in service at all due to the increased heating value of MSW.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.401-410
• /
• 2005

A series of studies involving formulation processes, bubbling activity test, diffusibility test and biological efficacy test was undertaken to develop Jumbo herbicide formulations in paddy rice field. Gas evolution speed from the tablets prepared by different organic acids was in the order of oxalic acid, malonic acid, citric acid, and tartaric acid. The total volume of evolved gas from the tablet and diffusibility of the active ingredient in the submerged water were increased with increase of water temperature; the volume from 1 g of tablet at 10, 15, 25 and $30^{\circ}C$ for 5 minutes after immersion into water was 20, 25, 28, 45, 57 mL, respectively. The concentration of halosulfuron-methyl and pyriminobac-methyl in submerged water at 5, 15, 20 and $30^{\circ}C$ at the 2.4 m distance from the applied spot of the tablet was 20, 48, 85, and 97% of the concentration of treated spot, respectively. The evolved gas volume from the tablets was not affected by pH of submerged water. The concentration of halosulfuron-methyl in different sizes of submerged water within 24 hours after treatment of the tablet was maintained 0.16 ppm, which is ideal concentration at standard dosage regardless of the submerged water area. The concentration of pyriminobac-methyl was also uniformly dispersed in the water within 24 hours after applying it into the submerged water. The wind velocity of 5 m $sec^{-1}$ on concentration distribution of halosulfuron-methyl and pyriminobac-methyl in the submerged water 24 hours after treatment was not influenced; an equal concentration in the up the wind and down the wind from the applied spot was maintained. Spot treatments of one tablet formulations(5 g) including 4 times higher dosage at 4 different spots resulted in even concentration distribution of active ingredient in the water 24 hours after applying it into the submerged water.