• 제목/요약/키워드: serial system

검색결과 1,054건 처리시간 0.029초

2단계 시리얼 시스템의 Fill Rate 만족 방안 (Two-stage Serial Supply Chains under Fill Rate Constraints)

  • 권익현;김성식
    • 한국경영과학회지
    • /
    • 제31권1호
    • /
    • pp.105-115
    • /
    • 2006
  • In this paper, we investigate the problem of minimizing average inventory costs subject to a fill rate constraint in a two-stage serial inventory model with a normally distributed demand. Fill rate is the fraction of demand that is satisfied immediately from on-hand inventory. We first find the lower bounds of base-stock levels in each node by using the exact base-stock level that satisfies a fill rate in a single node model proposed by Sobel. And then, we extensively analyze the system and show that the cost function is convex. Using such convexity and some other useful properties, we can easily find optimal base-stock levels numerically.

Comma free 코드를 이용한 HDTV 신호의 직렬 전송 방식 (Serial interface system of HDTV signal in comma free code)

  • 이호웅;강철호
    • 한국통신학회논문지
    • /
    • 제21권7호
    • /
    • pp.1814-1819
    • /
    • 1996
  • 이 논문은 comma free 코드를 사용한 새로운 직렬 전송 시스템을 묘사하였다. 일반적으로 병렬 25핀 케이블과 컨넥터는 HDVCR, D3VTR 및 HDTV 수신기와 같은 디지털 시스템에서 데이터를 전송 및 수신등에 사용된다. 동축 케이블은 소비자 상품의 응용 및 방송 스튜디오에서 긴 신호 경로와 전환등에 사용될 수 있다. 이 직렬 데이터 전송 기술은 에러 검출 및 자기 동기가 가능하며, PLL 제어를 위한 edge삽입이 용이하다. 뿐만 아니라 RFPLL, 스크램블링, NRZI등을 필요로 하지 않기 때문에 하드웨어가 간단하다.

  • PDF

TCMS에 의한 전동차 추진/제동 제어기법 (A Study of Train Powering/Braking Control by TCMS)

  • 한정수;박성호;김국진;박계서
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1999년도 춘계학술대회 논문집
    • /
    • pp.291-298
    • /
    • 1999
  • TCMS(Train Control & Management System) is the management system of train information which intensively control, monitor and test the main on-board equipments including propulsion/brake unit by the serial transmission line. TCMS reduces interface circuits and number of train lines by the software logic and utilizing serial communication method. This paper describes the method of powering and braking control by TCMS software logic, in comparison with the powering/braking control by conventional relay logic/hardwire circuits, and the software logic was verified by simulation test with TCMS simulator.

  • PDF

PCS 환경에서 윈도우 기법을 적용한 새로운 직렬 간섭 제거 기술 (A new interference cancellation applying widowing technique in PCS environment)

  • 도상현;김의묵;최형진
    • 한국통신학회논문지
    • /
    • 제22권11호
    • /
    • pp.2388-2400
    • /
    • 1997
  • 본 논문에서는 PCS환경에서 다중 사용자 간섭의 제거를 위한 직렬 간섭 제거 방식을 분석하고, 이를 개선한 새로운 직렬 간섭 제거 방식을 제안한다. DS/CDMA 통신 시스템에서는 성능 열화의 원인이 되는 원근 효과(near-far effect)와 다중 사용자 간섭(Multi Access Interference)에 대한 보상이 요구되며, 이러한 문제를 보상하는 방법으로 다중 사용자 간섭 제거를 위한 직렬 간섭 제거 기술이 제안된 바 있다. 그러나 이러한 직렬 제거 방식은 사용자간의 간섭 제거 횟수의 가변성으로 인하여 안정된 성능을 보이기가 어렵다. 본 논문에서는 이러한 단점을 개선한 방식으로 윈도우 기법을 적용한 직렬 간섭 제거 방식을 제안하고, 이에 대한 성능 평가를 수행하였다.

  • PDF

Signal integrity analysis of system interconnection module of high-density server supporting serial RapidIO

  • Kwon, Hyukje;Kwon, Wonok;Oh, Myeong-Hoon;Kim, Hagyoung
    • ETRI Journal
    • /
    • 제41권5호
    • /
    • pp.670-683
    • /
    • 2019
  • In this paper, we analyzed the signal integrity of a system interconnection module for a proposed high-density server. The proposed server integrates several components into a chassis. Therefore, the proposed server can access multiple computing resources. To support the system interconnection, among the highly integrated computing resources, the interconnection module, which is based on Serial RapidIO, has been newly adopted and supports a bandwidth of 800 Gbps while routing 160 differential signal traces. The module was designed for two different stack-up types on a printed circuit board. Each module was designed into 12- (version 1) and 14-layer (version 2) versions with thicknesses of 1.5T and 1.8T, respectively. Version 1 has a structure with two consecutive high-speed signal-layers in the middle of two power planes, whereas Version 2 has a single high-speed signal placed only in the space between two power planes. To analyze the signal integrity of the module, we probed the S-parameters, eye-diagrams, and crosstalk voltages. The results show that the high-speed signal integrity of Version 2 has a better quality than Version 1, even if the signal trace length is increased.

시공간 분석 기반 연쇄 범죄 거점 위치 예측 알고리즘 (Base Location Prediction Algorithm of Serial Crimes based on the Spatio-Temporal Analysis)

  • 홍동숙;김정준;강홍구;이기영;서종수;한기준
    • 한국공간정보시스템학회 논문지
    • /
    • 제10권2호
    • /
    • pp.63-79
    • /
    • 2008
  • 고급 GIS 및 복잡한 공간 분석 기술이 발전함에 따라 다양한 의사 결정 지원 시스템에서 지리적 혹은 공간적 문제 해결을 위한 고급 지식을 지원하기 위해 더욱 강력한 기술이 필요하게 되었다. 또한, 법집행 기관 및 수사 기관 등을 중심으로 효율적인 수사 및 향후 범죄 예방을 위해 과학 수사, 법 과학에 관한 연구의 필요성이 증대되고 있다. 특히, 연쇄 범죄의 공간적 패턴을 분석함으로써 범죄자의 거점 위치를 예측하기 위한 지리적 프로파일링(Geographic Profiling)에 대한 연구가 활발하다. 그러나, 기존의 지리적 프로파일링 연구에서는 공간적 패턴 분석을 위해 단순히 통계적 방법만을 사용하고 있고, 연쇄 범죄에 대한 다양한 공간적, 시간적 분석 기술을 지원하지 않으므로 거점 예측시 낮은 정확도를 보인다. 그러므로, 본 논문에서는 범행 위치의 공간적 분포와 범죄 발생의 시간적 분포 특성에 따라 연쇄 범죄의 시공간 패턴을 유형화하고, 이를 기반으로 연쇄 범죄의 거점 위치를 보다 정확하게 예측하는 알고리즘으로 STA-BLP(Spatio-Temporal Analysis based Base Location Prediction)을 제안한다. STA-BLP는 하나의 거점으로부터 특정 방향을 선호하여 이동하며 발생되는 연쇄 범죄의 비등방성 패턴을 고려하고, 동일한 경로에 대한 반복 이동에 대한 범죄자의 학습 효과를 고려함으로써 예측 정확도를 개선시킨다. 또한, 다수의 군집화된 범행 위치들로부터 각 군집에 소속된 범행 위치들에 대한 지역적 거점 위치 예측과 모든 범행 위치에 대한 전역적 거점 위치 예측을 통해 거점이 다수 존재하는 연쇄 범죄의 경우에도 보다 정확한 예측을 수행한다. 마지막으로 다양한 실험을 통해 기존에 제시된 알고리즘과 STA-BLP의 예측 정확도를 비교하여 제안 알고리즘의 우수성을 입증하였다.

  • PDF

마비된 말단근육의 제어를 위한 휴대용 다중 채널의 기능적 전기자극(FES) 장치 (A portable multichannel FES system for control of paralyzed extremities)

  • 류영재;박봉기;김영민;임영철;김하경
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.90-94
    • /
    • 1992
  • A portable multichannel functional electrical stimulation(FES) system for the fine control of the paralyzed extremities in spinal cord injury patients is described. This system is composed of a stimulation data creating system, a serial communication device, a 16-bit microprocessor, D/A converter of 32 channels and a display device. Stimulation patterns are created from analytical results of integrated EMGs during motion in normal subjects and are stored in the stimulation data creating system as data files. And then the stimulation patterns are sent to the memory in the portable multichannel FES system through serial communication interfacing device. Sophisticated fine control of paralyzed extrimities was realized by transmitting multichannel stimulation patterns to percutaneous intramuscular electrodes, which stimulate the motor function of paralyzed muscle simultaneously. Advantages of this system are as follws: 1) It is possible to modify stimulation patterns in accordance with the patient's situation. 2) This system is small and light.

  • PDF

생체신호(EKG, PPG)의 통신전송 모드에 대한 연구 (A study of the communication transfer mode of physical signal (EKG, PPG))

  • 김정래;김관석;김재윤;김한나;장은이
    • 문화기술의 융합
    • /
    • 제3권2호
    • /
    • pp.55-59
    • /
    • 2017
  • 본 연구는 무선통신 방식에 따른 통신 코드를 통해 생체신호를 전달하는 과정을 확인하였다. 생체 시스템은 ECG, PPG, Bluetooth으로 구성하여 신호를 받았고, 통신방식은 국제표준으로 IEEE802.15.1에 따라 진행하였으며, 주파수이동에 필요한 대역통신방식으로 신호를 산출하여 전송하였다. 무선통신으로 받은 신호를 표현하기 위해 사용된 프로그램은 Serial Chart, Processing, App Inventor를 구성하여 신호가 원활하게 전송됨을 확인하였다. 따라서 신호처리에 따른 실시간 그래프를 위한 코드와 프로세싱을 활용한 Serial Chart 그래프의 정량적 유추가 진행되면 원활한 무선통신 방식의 개선효과가 있을 것으로 예상된다.

열차제어컴퓨터 시리얼통신변환장치(HADAX)의 성능개선에 관한 연구 (Performance improvement of serial communication converter of train control computer)

  • 조봉관
    • 한국도시철도학회논문집
    • /
    • 제6권4호
    • /
    • pp.427-436
    • /
    • 2018
  • HADAX는 열차제어컴퓨터의 시리얼 통신변환장치로서 선로변 신호설비와 역의 신호설비 및 열차제어컴퓨터 등 여러 신호설비와 연결되어 있으며 열차제어를 위한 제어정보 및 신호설비의 상태정보를 전송한다. 그리고 스플리터 인터페이스를 통해 여러 대의 전자연동장치와 정보를 전송하고 있다. HADAX는 여러 신호 장치들과 시리얼 통신으로 인터페이스하고 있어 통신 접속 장애가 빈번히 발생하여 이중계 구성, 외부 스플리터 통합, 통신카드의 다채널화 등 성능개선이 필요하다. 성능이 개선된 HADAX 장치는 기존 장치와 외함의 치수와 커넥터의 호환성을 가져야 하며 이중계 절체, 스플리터 통합에 대한 성능을 검증하여야 한다. 따라서 기존에 구축된 신호설비와 연결하여 스플리터 통합 구성으로 진로제어시험, 이중계 절체시험, 다채널 통신시험을 통해 HADAX의 성능을 검증하였다.

PC 기반의 무인 소화물 접수장치 설계에 관한 연구 (Development of Small Package Drop-Off System)

  • 남병근;한경호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.450-452
    • /
    • 2001
  • In this paper, we proposed the automatic postal drop-off system based on the microprocessor board or PC. The weight of the small postal package is transmitted from the electronic scale and user-entered addresses and delivery rate are processed by the controller to calculate the fee. For 24 hour out-door operation and maintenance, non-cash payment methods such as credit card payment is used. The post stamp and receipt are printed by the thermal printer. For the electronic processing of the parcel, serial code is also printed on the stamp and receipts in bar code format. The parcel information obtained by the automatic postal drop-off system is transferred to remote central system by dial-up modem shared by the on site office. The proposed system and its control software are built for prototype model operation and the result met the design requirements. For real time processing, data reception through three serial ports is handled by interrupt routine. The proposed system is expected to be applied for commercial logistics system and pc automation system.

  • PDF