• 한국컴퓨터산업학회논문지
• /
• 제3권2호
• /
• pp.149-158
• /
• 2002

본 논문에서는 광컴퓨터의 개발에 이용될 수 있는 산술논리연산회로(ALU)를 설계하고 검증한다. 전자회로 기술의 접목이 용이하고 가장 상용화가 잘된 $LiNbO_3$ 광스위칭 소자에 기반한 이 ALU는 산술논리 동작을 실행하는 연산회로, 오퍼런드와 연산결과를 저장하는 메모리 소자 그리고 명령어 선택을 위한 부가회로로 구성되며, 비트 단위 직렬 방식으로 동작하는 것이다. 본 논문에서는 또한 설계한 ALU 회로의 정확성을 검증할 수 있는 시뮬레이터를 구현하고, 일련의 기본 명령어들을 순차적으로 실행하면서 메모리와 누산기에 저장된 값의 단계적 변화를 확인하는 시뮬레이션을 통하여 설계한 ALU가 정확함을 보인다.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.143-151
• /
• 2001

During the past several years, the major interests of car manufacturers in development of automatic transmission were in durability and shift quality. However, a large number of researches for improving shift quality that are based on dynamic characteristics of shifting mechanism have been rarely adopted in the developing process because it is quite difficult to predict the shifting performance from the dynamics simulation. One of the important reasons for the difference between simulation results and experiments arises from the automatic transmission hydraulic system that consists of many valves with high order model and shows a lot different dynamics to temperature variation. In this work, hardware-in-the-loop simulation system for automatic transmission was developed f3r improving the accuracy of simulated result by combining the real-time simulation model with the real hydraulic system. The real-time simulation for automatic transmission model excluding hydraulic system is executed with TI's TMS320C31 DSP and the interfacing board which includes 12bit A/D, PWM signal generator and driver, serial driver ,etc is designed for acquiring the simulation data and signal interface with hydraulic system. We verified the proper operation and correctness of shifting result by comparing the off-line simulation result with that of HILS and experimental result which was performed on transmission dynamometer driven by electric motor.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.667-674
• /
• 2014

One of the largest problems for tokamak devices such as Kazakhstan Tokamak for Material Testing (KTM) is the operation scenarios' development and execution. Operation scenarios may be varied often, so a convenient hardware and software solution is required for scenario management and execution. Dozens of diagnostic and control subsystems with numerous configuration settings may be used in an experiment, so it is required to automate the subsystem configuration process to coordinate changes of the related settings and to prevent errors. Most of the diagnostic and control subsystems software at KTM was unified using an extra software layer, describing the hardware abstraction interface. The experiment sequence was described using a command language. The whole infrastructure was brought together by a universal communication protocol supporting various media, including Ethernet and serial links. The operation sequence execution infrastructure was used at KTM to carry out plasma experiments.

• 디지털융복합연구
• /
• 제10권11호
• /
• pp.371-376
• /
• 2012

본 논문에서는 텍스트 영상에 대한 데이터 천이 최소화를 위한 새로운 데이터 코딩기법과 회로를 제안한다. 제안한 회로는 기존의 Modified LVDS(Low Voltage Differential Signaling)의 문제점인 입력되는 데이터간의 동기와 출력되는 데이터간의 동기 문제를 수정한 개선된 MLVDS 회로와 Text image에 대한 천이 최소화를 위한 추가적인 직렬 데이터 코딩 기법인 TMUX 알고리즘으로 한 클럭에 2비트의 신호를 동시에 전송하여 동작 주파수를 줄일 수 있으며, 전자파 장애와 전력 소비를 해결할 수 있다. 시뮬레이션 결과를 통해서 텍스트 영상 데이터 천이 최소화 향상과 입출력간의 동기문제를 보완되었음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.21-26
• /
• 2015

A wireless sensor network (WSN) is designed and implemented for a freeze dryer. Freeze-drying technology is widely used in the fields of pharmacy and biotechnology as well as the food and agriculture industries. Taking into account the demand for high-resolution pressure and temperature measurements in a freeze dryer, the proposed WSN has a significant advantage of creating a monitoring environment in a freeze dryer. The proposed WSN uses a ZigBee/IEEE 802.15.4 network with an altimeter module that contains a high-resolution pressure and temperature sensor with a serial digital data interface. The ZigBee network is suitable for low-energy and low-data-rate applications in the field of wireless communication. The altimeter module is capable of sensing pressure in the range of 7.5-975 Torr (10-1300 mbar) and temperature in the range of $-40^{\circ}C$ to $125^{\circ}C$ with a DC power consumption of $3{\mu}W$. The implemented WSN is installed in a commercial laboratory freeze dryer in order to demonstrate its functionality and efficiency. A comparison with the temperature profile measured by a thermocouple installed in the freeze dryer reveals that the resolution of the temperature profile measured by WSN is superior to that measured by the thermocouple.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.207-210
• /
• 2005

This paper describes a design of several ship's emergency lighting system(SELS) that power factor is improved and power is controlled extensively, and techniques to control and monitor this system in remote distance by PC serial communication. The remote monitoring control system is composed of emergency power supply system (EPSS), half bridge(HB)inverter, fluorescent lamp(FL), microprocessor, multi communication interface. EPSS checks the voltage of the emergency backup battery in real time. In case that the voltage of 13[V] or less has been detected for 5[msec] or longer for 3 times in a row, charger circuit is connected for battery charging. Experimental works using proposed system confirm that speedy and stable power to be supplied when main power source cut-off, compared with conventional analog type, and input power up to 35.0[%] by adjusting of pulse frequency of the HB inverter.

• 대한임베디드공학회논문지
• /
• 제8권5호
• /
• pp.249-254
• /
• 2013

In this paper we propose nonlinear control system for automatic unmanned vehicle using a RC (Radio Controlled) car which is usually controlled by a remote controller. In the proposed system, a RC car is dissembled and reassembled with several parts enabling it to be controlled by an android mobile platform with Bluetooth communication. In our system, an android mobile smartphone is mounted on the RC car and plays an important role as an eye of the car. The proposed system automatically controls the RC car to follow a lane that we draw on the floor of our laboratory. Also, the proposed RC car system can also be controlled manually using the accelerometer sensor of a smartphone through a Bluetooth module. Our proposed system that has both manual mode and automatic mode consists of several components; a microprocessor unit, a Bluetooth serial interface module, a smartphone, a dual motor controller and a RC toy car. We are now in the development of a group driving system in which one car follows the front car that tracks a lane automatically.

• 한국전자파학회논문지
• /
• 제9권1호
• /
• pp.43-51
• /
• 1998

본 논문에서는 IMT2000(FPLMTS)의 CAI(common air interface)의 방식으로 활발한 연구가 이루어지고 있는 CDMA방식에 대해서 가장 핵심이 되는 초기동기성능 분석을 Rician fading channel에서 수행하였다. false alarm probability, detection probability, test PN chip의 적 분구간을 변수로하여 double dwell방식에서 초기적분 구간길이에 대한 평균 최소동기획득 시간 및 신호검출 엄계값에 대한 평균 최소동기획득 시간을 분석한 결과에서 신호판정 임계치가 커짐에 따라 동기획득 소요시간은 그다지 증가하지 않음을 알 수 있다.

• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1207-1212
• /
• 2011

본 논문은 BLDC 서보모터 펌프를 사용하는 PBW(power-by-wire) 시스템을 위한 DSP(Digital Signal Processor) 제어기에 대한 연구를 제시한다. PBW 유압 엑츄에이터는 BLDC 서보모터에 의해 구동되는 유압펌프와 유압 실린더 그리고 제어기로 구현된다. 이 PBW 시스템은 유압 실린더의 선형 추진 동작을 위해 서보 모터의 속도 제어를 필요로 한다. 본 논문에서는 벡터 제어 방법과 MIN-MAX PWM 기술을 활용하는 서보 제어기를 구현한다. 제어기로서, PWM 파형발생기, A/D변환기, SPI(직병렬인터페이스) 포트 그리고 많은 입/출력 포트 등을 가지고 있는 이유로 TMS320F2812 DSP가 채택되었다.