• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.59-65
• /
• 2011

All-optical signal processing is expected to offer advantages in speed and power consumption against over electronics signal processing. It has a potential to solve the bottleneck issues of ultra-high speed communication network nodes. All-optical serial-to-parallel and parallel-to-serial data converters would make it possible to easily process the serial data information of a high-speed optical packet without optical-to-electronic-to-optical data conversion. In this paper, we explain the principle of simple and easily expandable all-optical serial-to-parallel and parallel-to-serial data converters based on Mach-Zehnder interferometers. We experimentally demonstrate these data converters at 10Gbit/s serial data rate. They are useful all-optical devices for the all-optical implementations of label decoding, self-routing, control of variable packets, bit-wise logical operation, and data format conversion.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.1-6
• /
• 2001

A $1"{\times}l"$, $512{\times}512$ poly-Si TFT-LCD with a new integrated 8-bit parallel-serial digital data driver was proposed and designed. For high resolution, the proposed parallel-serial digital driver used serial video data rather than parallel ones. Thus, digital circuits for driving one column line could be integrated within very small width. The parallel-serial digital data driver comprised of shift registers, latches, and serial digital-to-analog converters (DAC's). We designed a $1"{\times}l"$, $512{\times}512$ poly-Si TFT-LCD with integrated 8-bit parallel-serial digital data drivers by a circuit simulator which has physical-based analytical model of poly-Si TFT's. The fabricated shift register well operated at 2 MHz and $V_{DD}$=10V and the fabricated poly-Si TFT serial DAC's, which converts serial digital data to an analog signal, could convert one bit within $2.8{\mu}s$. The driver circuits for one data line occupied $8100{\times}50{\mu}m^2$ with $4{\mu}m$ design rule.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1039-1044
• /
• 2005

A Multi-channel serial device using the embedded Linux system is designed for a remote controlling and monitoring system. The proposed device consists of a FIFO, a state machine, and an interrupter. The device program written in embedded Linux enables the effective programming of device. While the conventional multi-channel serial devices accesses every individual serial devices, the proposed device accesses the multi-channel serial device as if it is a single serial device. The device efficiently performs the multi-channel serial input/output operation and has fast access time than the conventional multi-channel serial device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.776-783
• /
• 2009

Current-cut circuit is an effective method to obtain low power consumption in wireless communication systems as high speed OFDM. For the operation of current-mode FFT LSI with analog signal processing essentially requires current-mode serial-to-parallel/parallel-to-serial converter with multi input and output structure. However, the Hold-mode operation of current-mode serial-to-parallel/parallel-to-serial converter has unnecessary power consumption. We propose a novel current-mode serial-to-parallel/parallel-to-serial converter with current-cut circuit and full chip simulation results agree with experimental data of low power consumption. The proposed current-mode serial-to-parallel/parallel-to-serial converter promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.464-469
• /
• 2008

The RS-232C (Unbalanced serial) and RS-485 (balanced serial) are standard in serial communication. RS-485 uses a differential electrical signal, as opposed to unbalanced signals referenced to ground with the RS-232. Differential transmission, which uses two lines each for transmit and receive signal results in greater noise immunity and longer distances as compared to the RS-232C. The greater noise immunity and distance are big advantages in industrial environments. In general, one protocol on one serial interface is very normal application. In this study, we implemented multi protocols on one serial RS-485 interface and examine the performance and result with hanging multi equipments.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.665-668
• /
• 2003

In this paper, we have designed and implemented the RAID controller board which connects to the host computer with serial ATA interface and connects to the disks with parallel ATA interface. Serial ATA interface is proposed to overcome the design limitation of parallel ATA while enabling the storage interface to scale with the slowing media rate demands for PC platforms. Serial ATA is to replace parallel ATA with the compatibility with existing operating systems and drivers, adding performance headroom for years to come. It Moreover, serial ATA provides even faster transfer rate of 150 Mbytes/s which is larger than that of current parallel ATA. The RAID controller board designed in this paper combines up to 4 disks with parallel ATA interface, and connects to PC host computer with serial ATA interface. We have implemented RAID controller using Verilog HDL language with FPGA chip. The RAID controller supports RAID level 0 and 1 functionality. Experimently, the average read/write performance of parallel ATA interface is about 30 Mbytes/s. Therefore, when 4 parallel disks is connected to the RAID controller board, we can get almost full throughput of serial ATA protocol using the RAID level 0 configuration with 4 disks.

• ETRI Journal
• /
• v.24 no.6
• /
• pp.462-464
• /
• 2002

This paper presents a serial interface circuit that permits selection of the amount of data converted from serial-to-parallel and parallel-to-serial and overcomes the disadvantages of the conventional serial input/output interface. Based on the selected data length operating mode, 8 bit or 16 bit serial-to-parallel and 8 bit or 16 bit parallel-to-serial conversion takes place in data blocks of the selected data length.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.440-449
• /
• 2007

This paper provides a fine-grained analysis of Korean serial verb constructions within the HPSG framework, and covers major descriptive characteristics of the phenomena. This paper discusses constraints on serial verb constructions in terms of four aspects; transitivity, argument structure, semantic properties, and complementizers. As a result, 17 constraints have been built, which support the type hierarchies for Korean serial verb constructions. This paper also presents a sample derivation on the basis of on the constraints and the type hierarchies.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.530-534
• /
• 2002

This paper show serial communication method in order to design how to interface between fault tolerant systems with redundancy. Problem has been in the method that fault tolerant system had switched of serial data with common switching device. This problem degrade reliability in itself and total system which is interfaced with that serial communication system. So Arbitration module of serial communication which is suggested in this paper can improve the reliability using voter algorithm which fault is detected passively.

• East Asian Economic Review
• /
• v.22 no.4
• /
• pp.467-505
• /
• 2018

We propose a simple identification scheme for the causes of the violations of uncovered interest parity. Our method uses the serial dependence patterns of excess returns as a criterion for judging performance of economic models. We show that a mean reverting component in excess returns, representing a violation of uncovered interest parity, mainly contributes to generating different serial dependence patterns of excess returns: rational expectations risk premium models tend to generate negative serial dependence of excess returns, while expectational errors models tend to generate positive serial dependence.