• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.411-412
• /
• 2009

본 연구는 구조체 콘크리트의 강도를 평가, 관리 하는 기법이 건설현장에서 많은 문제점과 어려움을 내포하고 있어 이에 본 연구는 접합분리 시험체를 이용 구조체 콘크리트를 강도평가 하여 구조성능평가 및 현장 적용성 검증에 목적이 있다.

• The Journal of the Acoustical Society of Korea
• /
• 제27권1E호
• /
• pp.30-34
• /
• 2008

An improvement to the existing blind signal separation (BSS) method has been made in this paper. The proposed method models the inherent signal dependency observed in acoustic object to separate the real-world convolutive sound mixtures. The frequency domain approach requires solving the well known permutation problem, and the problem had been successfully solved by a vector representation of the sources whose multidimensional joint densities have a certain amount of dependency expressed by non-spherical distributions. Especially for speech signals, we observe strong dependencies across neighboring frequency bins and the decrease of those dependencies as the bins become far apart. The non-spherical joint density model proposed in this paper reflects this property of real-world speech signals. Experimental results show the improved performances over the spherical joint density representations.

• 센서학회지
• /
• 제19권2호
• /
• pp.112-117
• /
• 2010

A high-throughput sorting (HTS) system has been designed to separate target particles using a negative dielectrophoretic (n-DEP) force. The system consists of a meso-sized channel and a cantilever-type electrode(CE) array designed to separate a large number of target particles by discerning subtle difference of weight and dielectric material property of the particles. Using the polystyrene beads with various sizes of 10, 25 and $50{\mu}m$, the developed system exhibits high-throughput sorting of about 200 beads/sec and more than 80 % of separation efficiency.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.804-808
• /
• 2005

A pneumatic tire is made up of many flexible filaments of high modulus cord of natural textile, synthetic polymer, glass fiber, or fine hard drawn steel embedded in and bonded to a matrix of low modulus polymetric material. Adhesion property of these materials is very important in tire durability safety because belt-leaving-belt tread separation reduces the ability of a driver to control a vehicle, whether or not the separation is accompanied by a loss of air. In this study adhesion test of carcass-belt-tread is conducted on material properties of 5 PCR tire model, which are on sale in domestic market and analyzed adhesion properties. For those tire models FMVSS 109 indoor high speed durability test is conducted to analyze the correlation between adhesion force and high speed performance of tires and found the correlation between the two test results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• Bulletin of the Korean Chemical Society
• /
• 제22권4호
• /
• pp.409-412
• /
• 2001

Poly(p-tert-butyltrimethoxymonopropyloxycalix[4]arene-methylsiloxane) (TBCX-MS) has been prepared and used as a stationary phase in isothermal capillary gas chromatographic separation of some positional isomers. Retention factors (k) and separatio n factors $(\alpha)$ for the isomers were measured and compared with those on poly(p-tert-butyl-dimethoxydipropyloxycalix[4]arene-tetramethyldisiloxane) (TBCX-TMDS), poly(dimethoxydipropyloxycalix[4]arenetetramethyl-disiloxane) (CX-TMDS). Most of the isomers investigated are well resolved on TBCX-MS. Retention of all the compounds decreases on the three phases in the order, TBCX-TMDS ${\geq}$ TBCX-MS > CX-TMDS. Similar retention values on TBCX-TMDS and TBCX-MS seem to indicate that retention property of the two phases is not significantly affected by the spatial position of the calixarene moiety.

• 유기물자원화
• /
• 제8권2호
• /
• pp.60-70
• /
• 2000

현재 국내에서 처리에 어려움을 겪고 있으며 사회적으로 문제가 되고 있는 양돈 분뇨의 처리중 생물학적 처리를 위한 전처리 공정의 일환으로 비육돈 슬러리 돈사에서 발생하는 분뇨를 대상으로 고액분리에 관한 연구를 수행하였다. 최적의 고액 분리를 위하여 적정 응집제 선정 및 첨가량을 도출하였으며, 현장 규모의 고액 분리 장치를 통하여 규모별 최적 고액 분리 공정을 도출하였다. 이 결과 탈수성 개량을 위한 적정 응집제로는 Polyarcylamide 계열의 양이온 고분자 응집제인 E-851이 적합하였으며, 단위 고형물당 0.24~0.6%가 요구되었다. 본 연구에서 검토된 공정으로는 Mesh Screen, Drum Screen, Cyclone Drum Filter, Screw Press, 고속 Screw Decanter, 저속 Screw Decanter 및 DAF 공정을 조합하여 검토하였다. 그 결과 최적 공정으로는 중 소규모의 1차 고액 분리 공정으로는 Screw Press(응집제 첨가)와 대규모 및 공공처리장 규모에서는 저속 Screw Decanter(응집제 첨가)가 적정 공정으로 도출되었으며 2차 처리 공정으로는 가압부상조가 가장 안정적인 것으로 나타났다. 한편 고액 분리 유무에 따라 수분조절제 및 유기물 부하량 감소는 각각 94.8, 84.7%로 나타났으며 슬러리 양돈분뇨의 정화방안으로는 고액분리가 반드시 필요한 것으로 나타났다.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.80-87
• /
• 1985

고온에서 화학적역안정성 및 기계적안정성의 섬유구조를 갖기 위해 lithim complex gellant로 정한 지방산과 $LiOH\cdot H_2O$ 및 boric acid의 이차연속검화반응으로 lithium dual complex 그리이스를 합성하였다. complex gellant의 양은 14%(NLGI 2호)가 적정량이었으며, 특히 castor wax를 1.5% 첨가했을때 이상적인 성능을 나타냈다. 이렇게 합성한 그리이스의 유분리성, 산화안정성, 내수성, 혼화안정성, 극압 및 내마모성은 ASTM 및 KS 방법에 준해 시험하였으며, 매우 우수한 특성을 지녔음을 알았다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.314-314
• /
• 2006

The FRET property has been extensively studied from the theoretical view points to the practical applications. In case that the donor and acceptor are confined in nanodimension, the FRET effectively occurs, because of their distant dependent characteristic. However, there are no reports concerning FRET with one dimensional (1D) nanomaterial. We have successfully prepared the PMMA nanotubes using vapor deposition polymerization as the platform of FRET. The dye-PMMA composite nanofiber has also been produced without phase separation and any deterioration of properties of the dyes. The PMMA 1D nanocomposite doped two dyes with great spectral overlap between donor and acceptor displayed FRET property.

• Journal of information and communication convergence engineering
• /
• 제2권1호
• /
• pp.5-8
• /
• 2004

DS-COMA is now a matured multiple access technology that utilizes spreading codes for user separation. In this paper, we attempt to improve the performance of a multiuser DS-COMA system with a unique chip shaping code called Carrier Interferometry (CI) code. The CI codes exhibit an excellent correlation property that can be used in many applications. In DS-COMA with CI codes (CI/DS-COMA), the symbols are spread by a spreading code and then the chip signals are shaped using a CI code. Due to the correlation property of the CI code, a diversity gain from the shaped chip signals is achieved and the performance of DS-COMA is significantly improved. Comparison study demonstrates that the DS-COMA with CI outperforms the conventional DS-COMA system in multiuser environments.