• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1030-1036
• /
• 2009

In 1990's, in Europe and some advanced nations, the structural reform of the railroad industry for improving the productive efficiency of the railroad industry and competitive power had been progressed. This paper empirically explores the relationship between railway restructuring and productive efficiency in the railway industry. We use Data Envelopment Analysis (DEA) to construct efficiency scores, and explain these scores, using Tobit regression analysis by using variables reflecting institutional factors and organizational type. Our results suggest that vertical separation, infrastructure and services are separated, and horizontal separation, passenger service and freight service are separated, improve productive efficiency. We also find that market competition has positive effect on the efficiency, but independent management from the government has negative effect, which is in line with economic intuition as well as with expectations on the railway restructuring. As a consequence, increased independence without sufficient competition and adequate regulation may deteriorate incentives for productive efficiency.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.108.2-108.2
• /
• 2012

Recent results from microlensing surveys show that a free-floating planet or a wide-separation planet is more numerous than a main-sequence star in the Galaxy. Moreover, the detection efficiency of the planets will be improved in next-generation experiments with a high survey monitoring frequency. However, microlensing events produced by both planets appear similar light curves with a short duration timescale, thus it is difficult to distinguish them. In this paper, we investigated the detectable separation range of a wide-separation planet as the planet bound to its host star. We construct the fractional deviation maps using the magnifications of the planetary lensing and the single-lensing by planet itself for various parameters such as a mass ratio, separation, and source radius. As a result, we found that the pattern of the fractional deviation is related to the ratio of source radius to caustic size, and the ratio satisfying the detection criterion (i.e., ${\geq}5%$ in the fractional deviation) varies with a separation. Hence, we derived a fitting formula as the function of a mass ratio and a source radius to reflect the variation in the calculations of the detectable separation range of a wide-separation planet as the planet bound to its host star. In addition, we estimated the condition that a wide-separation planet can be detected as a single-lensing event under the finite source effect. We found that such a case is possible provided that the source radius is smaller than ~2.5 times of Einstein ring radius of a planet, regardless of a separation or a mass ratio.

• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.27-34
• /
• 2024

Network separation is an important policy that Cyber Incident prevent cyber and protect data. Recently, the IT environment is changing in software development, such as remote work, using the cloud, and using open sources. Due to these changes, fintech companies' development productivity and efficiency are lowering due to network separation regulations, and the demand for easing network separation continued. The government revised the regulations electronic financial supervision(hereafter EFS) in response to needs for mitigation of network separation in the IT environment and fintech companies. Some amendments to the EFS, which took effect on 01/01/2023, mitigate network separation only for research and development purposes in cloud environments. If software developed in a cloud development environment is applied to an operating system through a distribution system the existing perimeter-based security model will not satisfaction the network separation conditions. In this Study, we would like to propose a way to maintain the DevOps system in a network separation environment by Using the zero trust security system.

• Clean Technology
• /
• v.19 no.2
• /
• pp.140-147
• /
• 2013

In this study, chemical demulsification and electrical treatment methods were investigated for improving the efficiency of water separation from a water/bitumen emulsion. Two types of motor oils (GS Caltex, Deluxe Gold V 7.5 W/30 and, Hyundai gear oil 85 W/140) were used as model oils in basic experiments to investigate the effects of a demulsifier on water/oil emulsion separation. Chemical demulsifiers showing good water separation performance were then used in asphalt emulsion and bitumen emulsion separation trials. Maleic anhydride and e-caprolactam were shown to be good oil soluble demulsifiers and 2-ethylhexyl acrylate and acrylic acid were effective as water soluble demulsifiers. Based on the results obtained in basic experiments, these four demulsifiers were used in further asphalt emulsion experiments. The oil soluble demulsifiers showed higher water separation efficiencies than the water soluble demulsifiers. To investigate the water separation efficiency using a combined chemical and electrical treatment method, the water/bitumen emulsion was separated with the electrical oil treatment apparatus after a chemical demulsifier had been added to it.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1827-1830
• /
• 2002

A matrix pencil method for source separation 〔3〕was shown to be an unbiased signal extractor in the presence of temporally white noise. Its efficiency and robustness lies in the fact that the method in 〔3〕 employs only time-delayed correlation matrices of the observation data, In this paper we stress out that the matrix pencil method might suffer from a numerical instability problem, be- cause the symmetric-definite pencil was not exploited. Moreover we present a simple method of constructing a symmetric-definite pencil so that the matrix pencil method is numerically stable.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.2
• /
• pp.94-101
• /
• 2001

Fin effectiveness and efficiency of a thermally asymmetric rectangular fin are represented as a function of non-dimensional fin length, width, fip tip surface Biot number and the ratio of fin bottom surface Biot number to top surface Biot number. For this analysis, three dimensional separation of variables method is used. One of the results shows that fin effectiveness can be increased or decreased depending on the fin length as the fin tip surface Biot number increases while fin efficiency decreases without depending on that as the fin tip surface Biot number increases.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.319-329
• /
• 2004

The electrorefining experiments with an anode composed of U, Y, Gd, Nd and Ce (or U, Gd, Dy and Ce) were carried out in the KC1-LiCl eutectic melt at $500^{\circ}C$, Uranium was the major component in the cathode deposits at the high initial uranium concentration, and the separation factors of the uranium with respect to the rare earths (REs) were calculated according to the applied voltage and the uranium concentration in the molten salt. The current efficiency was inversely in proportion to the applied voltage in the range of 1.0 V to 1, 9 V (vs. STS304L). The dependency of the applied voltage on the current efficiency as well as the deposition rate was discussed in terms of the microstructural feature and crystal structure of the deposit.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.2 s.19
• /
• pp.34-40
• /
• 2003

Numerical studies have been conducted to predict the solid-liquid separation efficiency of turbulent flow in a hydrocyclone using a commercial CFD code. To validate the CFD code, several preliminary numerical calculations are carried out to determine the influence of parameters such as grid systems, numerical schemes, and turbulence models. The numerical studies have been performed on the hydrocyclones with the different vortex finder geometries by changing the mass flow rate, and the results were compared with the experimental data. The results show that the CFD code can be used as a design tool to improve the performance of hydrocyclones.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.761-769
• /
• 2006

In this paper, we address the problem of closely spaced source localization using sensor array processing. In particular, the performance efficiency (measured in terms of the root mean square error) of the unconditional maximum likelihood (UML) algorithm for estimating the direction of arrival (DOA) of near-field sources is evaluated. Four parameters are considered in this evaluation: angular separation among sources, signal-to-noise ratio (SNR), number of snapshots, and number of sources (multiple sources). Simulations are conducted to illustrate the UML performance to compute the DOA of sources in the near-field. Finally, results are also presented that compare the performance of the UML DOA estimator with the existing multiple signal classification approach. The results show the capability of the UML estimator for estimating the DOA when the angular separation is taken into account as a critical parameter. These results are consistent in both low SNR and multiple-source scenarios.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.145-150
• /
• 2002

The distillation column is one of large energy consumable units in the cryogenic air separation process and the accurate energy analysis of this unit is necessary for choice of energy saving process. In this work, the energy method was adopted for energy analysis of a cryogenic nitrogen distillation column. In order to designing the energy saving distillation column, the exergy distribution of feed air, exergy efficiency and exergy loss for process condition was investigated and the optimal process condition to minimize the exergy loss was found. The result from this work can be used as a guideline for the choice of the process design conditions and efficiency improvement of cryogenic distillation column.