• Animal Bioscience
• /
• 제36권5호
• /
• pp.810-817
• /
• 2023

Objective: The aim was to compare the behavioral response to full separation of cows and calves maintained together for 100 days or 24 h. Methods: Twelve Holstein-Friesian cow-calf pairs were enrolled into either treatment or industry groups (n = 6 cow-calf pairs/group). The treatment cows and calves were maintained on pasture together for 106±8.6 d and temporarily separated twice a day for milking. The Industry cows and their calves, were separated within 24 h postpartum. Triaxial accelerometer neck-mounted sensors were fitted to cows 3 weeks before separation to measure hourly rumination and activity. Before separation, cow and calf behavior was observed by scan sampling for 15 min. During the separation process, frequency of vocalizations and turn arounds were recorded. At separation, cows were moved to an observation pen where behavior was recorded for 3 d. A CCTV camera was used to record video footage of cows within the observation pens and behavior was documented from the videos in 15 min intervals across the 3 d. Results: Before separation, industry calves were more likely to be near their mother than Treatment calves. During the separation process, vocalization and turn around behavior was similar between groups. After full separation, treatment cows vocalized three times more than industry cows. However, the frequency of time spent close to barrier, standing, lying, walking, and eating were similar between industry and treatment cows. Treatment cows had greater rumination duration, and were more active, than industry cows. Conclusion: These findings suggest a similar behavioral response to full calf separation and greater occurrence of vocalizations, from cows maintained in a long-term, pasture-based, cow-calf rearing system when ompared to cows separated within 24 h. However, further work is required to assess the impact of full separation on calf behavior.

• Advances in nano research
• /
• 제3권3호
• /
• pp.143-168
• /
• 2015

Initiation of crack and its growth simulation requires accurate model of traction - separation law. Accurate modeling of traction-separation law remains always a great challenge. Atomistic simulations based prediction has great potential in arriving at accurate traction-separation law. The present paper is aimed at establishing a method to address the above problem. A method for traction-separation law prediction via utilizing atomistic simulations data has been proposed. In this direction, firstly, a simpler approach of common neighbor analysis (CNA) for the prediction of crack growth has been proposed and results have been compared with previously used approach of threshold potential energy. Next, a scheme for prediction of crack speed has been demonstrated based on the stable crack growth criteria. Also, an algorithm has been proposed that utilizes a variable relaxation time period for the computation of crack growth, accurate stress behavior, and traction-separation atomistic law. An understanding has been established for the generation of smoother traction-separation law (including the effect of free surface) from a huge amount of raw atomistic data. A new curve fit has also been proposed for predicting traction-separation data generated from the molecular dynamics simulations. The proposed traction-separation law has also been compared with the polynomial and exponential model used earlier for the prediction of traction-separation law for the bulk materials.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.25-30
• /
• 2003

Chitosan membranes crosslinked with glutaraldehayde that contained chiral environment were prepared. The chitosan membranes were characterized using FTIR and swelling index measurements. Their swelling index in water ranged from 100 to 70%, depending on the crosslinking time. The separation of D- and L-isomers of tryptophan was achieved through a pressure driven membrane separation process, using the self-supporting crosslinked chitosan membranes. The chiral separation performance of the membranes depended strongly on the swelling index of the membranes and the separation conditions such as concentration of feed solutions and different operating pressures. Especially when a chitosan membrane with a swelling index of 70% was used, almost complete optical resolution of D- and L-tryptophan was obtained ; enantiomeric excess (ee %) of 97.92% and flux of 2.26 g/㎡$.$h.

• 한국추진공학회지
• /
• 제9권1호
• /
• pp.27-34
• /
• 2005

본 논문은 기존 폭발볼트의 기능을 그대로 유지하면서 분리시 발생되는 파편 및 충격파의 악작용을 완벽히 제거할 수 있는 가스팽창분리형 볼트의 분리거동에 관한 연구이다. 가스팽창분리형 볼트는 분리화약을 사용하지 않고 압력카트리지의 압력만 이용하여 분리가 이루어지게 개발된 파이로 장치로써, 분리거동을 수치해석 함으로써 볼트의 설계인자를 최적화할 수 있었다. 수치해석 및 시험결과에서 노치는 쐐기형태를 가지며 내부 홈 깊이가 분리면과 일치하는 모델이 가장 좋은 분리현상이 나타났다. 본 연구에서 제시한 볼트 설계인자의 최적화 방법은 향후 다른 종류의 폭발볼트와 같은 파이로 장치 설계에 기초자료를 제공할 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.238-245
• /
• 2000

Separation strips are temporary joints to prevent crack due to stress induced by shrinkage. In this study, an analysis procedure considering separation strip is proposed to decide proper casting time of separation strip and cracking stresses of the example building slabs are calculated using this procedure. The result of the example high rise building shows that the percentage of cracking stress to the modulus of fracture is 43.4% when closing of separation strip are 30 days after placing the slab, so it is enough time for the separation strip in each floor to absorb the effects of shrinkage.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.87-88
• /
• 1999

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1435-1439
• /
• 2002

This paper presents a form of the cohesive surface separation potential, which can produce potential curves by varying a single dimensionless parameter. Results show that a partial modification of Xu and Needleman's (1994) cohesive surface separation potential makes it possible to present the other potential corves as a special case as long as the normal separation is concerned. The proposed potential may describe interfacial debonding-crack initiation and growth-character of materials and, through numerical simulation, provide an insight for the effect of different cohesive surface separation potentials on the interfacial debonding.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.91-98
• /
• 2010

The paper presents results of a study on the selective separation technology of ferrous and non-ferrous metals from broken light bulbs. The proposed method is to use magnetic fluids to obtain a magnetic fluid based- separation. [1] The study was conducted using three types of waste materials: regular light bulbs, auto light bulbs and neon tubes. In order to process the waste materials, a six stages technologic flow was developed: a) separation of light bulbs components; b) Physical and chemical analysis of raw materials; c) grain conditioning of the raw material; d) dry magnetic separation of ferrous components; e) magnetic fluid separation of non-magnetic material; f) recovery of the magnetic fluid adhered to the surface of the separated material grains. [2] This study shows that magnetic fluid separation is only profitable for regular and auto light bulbs and is not profitable in the case of neon tubes.

• 통상정보연구
• /
• 제8권3호
• /
• pp.121-142
• /
• 2006

Recently regarding the ownership and proper operational forms of paperless trade infrastructure has become an issue. In this research the structural separation approach, different from the behavioral regulation approach, has been adopted. Following the structural separation, the core e-trade infrastructure which is separated from a vertically integrated provider, can be operated by three different forms such as a private sector; a public sector; finally a consortium among participants. As another option, the separated whole infrastructure including both core and non-core can be operated by a independent private entity. However, this option is not interesting case to us. As the last option, it can be considered that a new wholesale independent company for the separated core-infra can be set up for running. Additionally, three other alternative ways such as accounting separation, division separation, or corporation separation with keeping same ownership are also demonstrated. However the cautious investigation on cost and benefits of vertical separation are strongly recommended by OECD and agrees with the conclusion of this study.

• Fibers and Polymers
• /
• 제2권2호
• /
• pp.81-85
• /
• 2001

The effects of rate of phase separation to ester interchange reactions and the repulsive pair interaction energy on the phase behavior in a phase-separated immiscible polyester blend are investigated using a Monte Carlo simulation method. The time evolution of structure factor and the degree of randomness are monitored as a function of homogenization time. When the phase separation is dominant over ester interchange reactions, the domain size slowly increases with homogenization time. However, when the pair interaction becomes less repulsive, the domain size does not significantly change with homogenization time. On the other hand, when ester interchange reactions are dominant over the phase separation, the homogenization proceeds without a change in the domain size. The higher the extent of phase separation, the lower the increasing rate of the DR. However, when the phase separation is sufficiently dominant, the effect of the extent of phase separation on the increasing rate of the degree of randomness become less significant.