• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.578-584
• /
• 2018

이미지 분할은 영상의 해석과 이미지 인식 분야에서 다양한 방법으로 연구되고 있으며, 특정한 목적에 따른 이미지의 특성을 분리하기 위해 사용된다. 본 논문에서는 열화상 이미지의 특징점인 고온을 검출하여 이미지를 분할하는 알고리즘을 제안한다. 또한 연산속도의 향상을 위해 제안하는 알고리즘을 Zynq-7000 Evaluation Board 환경에서 FPGA Hardware Block Design을 진행하였다. 고온 검출 알고리즘은 16ms에서 0.001ms의 속도 향상을 보였으며 전체 블록은 50ms에서 0.322ms로 속도 향상을 보이는 것을 확인하였다. 또한 영상 테스트벤치를 사용하여 소프트웨어와 하드웨어 이미지에 대해 유사한 PSNR 결과를 입증하였다.

• 한국항행학회논문지
• /
• 제3권1호
• /
• pp.52-59
• /
• 1999

선형 증폭단, ADC 그리고 디지털 신호 처리기로 이루어진 디지털 광대역 마이크로파 수신기는 시스템의 감도와 동적 범위로 성능 평가를 해석할 수 있다. 시스템의 감도와 동적 범위는 시스템의 이득, 3차 상호변조적과 ADC 특성으로 결정되어지며 선형 증폭단의 설계 방법 또한 중요한 영향을 미친다. 그리고 수신기로 입력되는 두 신호의 주파수가 인접한 경우 디지털 신호 처리기는 두 신호를 분리할 수 있어야 한다. 본 논문에서는 증폭단의 이득을 변화시켜 동적 범위를 측정한 다음, 가장 적절한 감도와 동적 범위를 선택할 수 있는 이득 값을 결정하고, 인접한 두 신호의 분리를 위해 고해상도 스펙트럼 추정법을 사용하였다.

• 경영과정보연구
• /
• 제21권
• /
• pp.115-129
• /
• 2007

This paper deals with recognition differences about the purchasing ethics scale of hospital of Koreans and New Zealanders in order to compare the recognition differences of purchase ethics of people of two countries in the hospital management. The results are as follows : 1. From the viewpoint of recognition about the purchasing ethics scale of hospital of Koreans and New Zealanders as two examining objects, egoism tendency is the lowest and deontology tendency is the highest commonly. 2. Koreans' two separate tendencies mentioned above shows that Korean people have been influenced by Confucian culture in spite of its high speed industralization. 3. New Zealanders' two separate tendencies mentioned above shows that they have performed their duties faithfully despite the fact of New Zealand is a nation of globalization index 2. 4. Average differences between the purchasing ethics scale of hospital shows that Koreans' ethical sensitivity is somewhat higher than of New Zealanders. 5. From the viewpoint between of the purchasing ethics scale of hospital, the egoism and utilitarian scales show big differences in ethical tendencies, and deontology scale shows differences in them.

• 한국컴퓨터정보학회논문지
• /
• 제19권11호
• /
• pp.53-61
• /
• 2014

본 논문에서는 실내 환경의 3차원 공간에서 벽면을 분리해내기 위해 깊이 카메라로 받아들인 영상을 이용한 방법을 제안한다. 논문의 실험 결과에서 얻을 수 있는 정보를 이용하면 실내 공간을 인식하거나 그에 따른 인접한 물체의 탐색 또는 벽면에 프로젝터를 투사하는 등 3차원 공간 활용에 용이하다. 논문에서 제안하는 방법은 먼저 3차원 입력 영상에서의 좌표 점들을 이용하여 법선 벡터를 검출하고, 검출 된 법선 벡터를 비슷한 벡터들끼리의 그룹으로 나눈다. 나누어진 그룹들을 RANSAC을 이용하여 평면 단위로 분리한 후, 분리된 평면들은 실내 환경에서 알 수 있는 도메인 지식들에 기반 하여 벽면으로 구분 된다. 마지막으로 본 논문에서 제안하는 방법은 다양한 실험 환경을 통해 성능을 입증한다.

• Geosystem Engineering
• /
• 제21권5호
• /
• pp.262-272
• /
• 2018

The U-statistic method is one of the most important structural methods to separate the anomaly from background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, 3D U-statistic method has been applied for the first time through the three-dimensional (3D) modeling of an ore deposit. In order to achieve this purpose, 3D U-statistic is applied on the data (Fe grade) resulted from the drilling network in Baghak mine, central part of the Sangan iron mines (in Khorassan Razavi Province, Iran). Afterward, results from applying 3D U-statistic method are used for 3D modeling of the iron mineralization. Results show that the anomalous values are well separated from background so that the determined samples as anomalous are not dispersed and according to their positioning, denser areas of anomalous samples could be considered as anomaly areas. And also, final results (3D model of iron mineralization) show that output model using this method is compatible with designed model for mining operation. Moreover, seen that U-statistic method in addition for separating anomaly from background, could be very efficient for the 3D modeling of different ore type.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권4호
• /
• pp.217-222
• /
• 2011

Genetic algorithms are one of the most important methods used to solve the Traveling Salesman Problem. Therefore, many researchers have tried to improve the Genetic Algorithm by using different methods and operations in order to find the optimal solution within reasonable time. This paper intends to find a new approach that adopts an improved genetic algorithm to solve the Traveling Salesman Problem, and compare with the well known heuristic method, namely, Kohonen Self-Organizing Map by using different data sets of symmetric TSP from TSPLIB. In order to improve the search process for the optimal solution, the proposed approach consists of three strategies: two separate tour segments sets, the improved crossover operator, and the improved mutation operator. The two separate tour segments sets are construction heuristic which produces tour of the first generation with low cost. The improved crossover operator finds the candidate fine tour segments in parents and preserves them for descendants. The mutation operator is an operator which can optimize a chromosome with mutation successfully by altering the mutation probability dynamically. The two improved operators can be used to avoid the premature convergence. Simulation experiments are executed to investigate the quality of the solution and convergence speed by using a representative set of test problems taken from TSPLIB. The results of a comparison between the new approach using the improved genetic algorithm and the Kohonen Self-Organizing Map show that the new approach yields better results for problems up to 200 cities.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.133-143
• /
• 2014

The purpose of this article is to search stakeholders' recognition related to Fire Construction Surveillance system; a client(order), fire fighting officer, supervision company, construction company, design company, other. The paper provides 4 important things. Firstly, a client(order) suggested the lowest recognition in the needs about the need of separation order, that of contract for any construction work limited registered companies, and that of standard price for engineering.. Secondly, the design company is lowest recognition in guidance and control participating in construction-design phase. Thirdly, the design company is lowest in adjustment about manpower-allocation according to allocation criteria of technical manpower. Fourthly, a client(order) and supervision company are relatively lower than other stakeholder in necessity on special education and training system for auditor in fire protection construction. Almost all related matters are related to more or less stakeholders' interest.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.143-151
• /
• 2008

본 연구에서는 2차 비탄성해석과 단면점증법을 이용한 평면 강골조 구조물의 최적설계 방법을 제시하였다. 2차 비탄성해석은 구조시스템과 그에 속한 부재들의 기하학적 비선형과 재료적 비선형을 고려하기 때문에 2차 비탄성해석에 바탕을 둔 설계법에서는 해석 후 개별부재의 강도검토가 필요 없다. 본 논문에서 제안한 단면점증법을 최적화 기법으로 사용하였으며 목적함수로 구조물의 중량을 사용하였다. 제약조건식은 구조시스템의 하중-저항능력, 처짐 및 층간 수평변위 등을 고려하였으며 제안된 방법에 의한 설계결과를 다른 방법에 의한 것들과 비교하여 그 효율성을 증명하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제11권2호
• /
• pp.69-76
• /
• 1984

In order to obtain high proportion of Y sperm the semen was laid over 6%,10% and 20% bovine serum albumin. Separated sperm were stained with quinacrine mustard in order to see F - body which could be seen in human Y sperm. But we could'nt find F-body in the bull sperm. So sperm were compared with size of sperm head. As a result of observation separated sperm was small in size of length and width of sperm head as compared with control sperm. So it was found that the proportion of Y sperm showed a marked increase in separated layer. Then the higher albumin density was, the higher the proportion of Y sperm which had smaller head and faster motility was. But the higher albumin density was, the lower the recovery rate of sperm was. So it was hard to separate Y sperm in oligospermia.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1700-1703
• /
• 1997

The flexibility of the manipulator inevitably inducess the vibration at the end effector. For the increase in speed and accuracy at the end tip, in this work, position and vibration control of a flexible manipuator with a separate voice coil type actrator for vibration suppression, is studied. The flexible manipulator with a tip mass is modeled an Euler-Bernoulli beam. An H.inf. controller is designed in order to make the controlled system robust against unmodeled higher-order mode vibration of the manipulator, output sensor noise, and etc. Simulations and experiments show that the modeling of the system is valid and that robust vibration control of the flexible manipulator is efficiently achieved.