• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.84.1-84
• /
• 2002

A Human-Robot-Interface(HRI) for the disabled Person is developed. $\textbullet$ HRI consists of the laser pointer '||'&'||' USB camera and pressure sensor. $\textbullet$ HRI makes three degree of freedom. $\textbullet$ Three robot position control method with the Interface is presented. $\textbullet$ Experimental results show that user control the 6 DOF robot with the interface and control method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.185-192
• /
• 2021

Various methods have been proposed to determine the defect detection of welding bead, and recently sensor data and image data inspection have been steadily announced. There are advantages that sensor data inspection is highly accurate, and two-dimensional-based image data inspection is able to determine the position of the welding bead. However, when analyzing only with sensor data, it is difficult to determine whether the welding has been performed at the correct position. On the other hand, the image data inspection does not have high accuracy due to noise and measurement errors. In this paper, we propose a method that can complement the shortcomings of each inspection method and increase its advantages to improve accuracy and speed up inspection by fusing sensor data inspection which are average current, average volt, and mixed gas data, and image data inspection methods and is implemented as software. In addition, it is intended to allow users to conveniently and intuitively analyze and grasp the results by performing analysis using a graphical user interface(GUI) and checking the data and inspection results used for the inspection. Sensor inspection is performed using the characteristics of each sensor data, and image data is inspected by applying a morphology geodesic active contour algorithm. The experimental results showed 98% accuracy, and when performing the inspection on the four image data, and sensor data the inspection time was about 1.9 seconds, indicating the performance of software that can be used as a real-time inspector in the welding process.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.111-120
• /
• 2016

Education equipment for field programmable gate array (FPGA) design of sensor-based IOT (Internet Of Thing) system is introduced. Because sensors have different interfaces, several types of interface controller on FPGA need. Using this equipment, several types of interface controller, which can control ADC (analog-to-digital converter) for analog sensor outputs and $I^2C$ (Inter-Integrated Circuit), SPI (Serial Peripheral Interface Bus), and GPIO (General-Purpose Input/Output) for digital sensor outputs, can be designed on FPGA. Image processing hardware using image sensors and display controller for real and image-processed images or videos can be design on FPGA chip. This equipment can design a SOC (System On Chip) consisting of a hard process core on Linux OS and a FPGA block for IOT system which can communicate with wire and wireless networks. Using the education equipment, an example of hardware design using image sensor and accelerometer is described, and an example of syllabus for "Digital system design using FPGA" course is introduced. Using the education equipment, students can develop the ability to design some hardware, and to train the ability for the creative capstone design through conceptual, partial-level, and detail designs.

• Journal of Korea Multimedia Society
• /
• v.17 no.12
• /
• pp.1437-1445
• /
• 2014

A smartphone has very limited input methods regardless of its various functions. In this respect, it is one alternative that sensor motion recognition can make intuitive and various user interface. In this paper, we recognize user's motion using acceleration sensor, magnetic field sensor, and gyro sensor in smartphone. We try to reduce sensing error by gradient descent algorithm because in single sensor it is hard to obtain correct data. And we apply vector quantization by conversion of rotation displacement to spherical coordinate system for elevated recognition rate and recognition of small motion. After vector quantization process, we recognize motion using HMM(Hidden Markov Model).

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.176-180
• /
• 2009

This paper investigates protocol architecture for a web-sensor gateway interconnecting internet and wireless sensor network, in which Zigbee sensors are connected over the IEEE802.15.4 communication protocol standard. The web-sensor gateway is to deliver data between TCP/IP and Zigbee/IEEE802.15.4 protocols, transparently. Since the gateway provides a means to remotely control and aggregate sensor data over the internet, it needs to be designed in the view point of users and in their convenience. In accordance, the common gateway interface technology satisfying users on the web browser to efficiently manage and query the sensors in the wireless sensor networks, ubiquitously, is also introduced. Finally, a simulation prototype for the web-sensor gateway is proposed and verified using OPNET simulation tool.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.515-524
• /
• 2013

For the development of reliable software, Software testing is the most important. Recently small changes of the software according to the importance of regression testing is growing. To verify Application of a large number of nodes, Network simulator environment is required. This paper proposed interface module between network framework for sensor network application and co-simulator to unit test sensor network application. To conclude, developer can focus on sensor network application implementation only, so the improved integrated simulator contributes to increase development productivity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2045-2048
• /
• 2006

This study presented the non-contact human interface using by CdS sensor array. We are pointing the light on the target to measure the value. We converted the CdS sensors value to digital value and applied the digital value to set the coordinate value from the ratio of it to the adjacent sensors. The indicated coordinate-value is presented on the PC screen by LabVIEW The experimental result, we could confirm the right value divided between each sensor distance into In parts.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.28-37
• /
• 2007

IEEE 1451 standard defines an interface for network and transducer. In this paper, We propose an architectural model to configure data acquisition system and wireless smart sensor node based on IEEE 1451 standard. Proposed Network Capable Application Processor(NCAP) supports the task of data acquisition and communication for smart sensor node and network. The NCAP is able to reconfigure without interrupting the functionality of the wireless sensor node and receives the critical information of transducer using the DB. Smart sensor node is able to provide the basic information of sensor in digital format. This digital format is called Transducer Electronic Data Sheet(TEDS), is capable of plug-and-play capability of wireless sensor node and the NCAP. We simplify the format of TEDS and template to apply to wireless network environment. information of TEDS and template is transmitted using ad-hoc routing. This study system uses body temperature sensor and ECG(Electrocardiogram) sensor to provide the medical information service. The format of template is selected by data sheet of the sensor and reconfigured to accurately describe the property of the sensor. DB of NCAP is possible to register new template and information of the property as developing new sensor.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2577-2582
• /
• 2013

A novel stick-shaped portable sensing device featuring a microhole array interface between the polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) gel and water phase was developed for in-situ sensing of perchlorate ions in real water samples. Perchlorate sensitive sensing responses were obtained based on measuring the current changes with respect to the assisted transfer reaction of perchlorate ions by a perchlorate selective ligand namely, bis(dibenzoylmethanato)Ni(II) (Ni(DBM)2) across the polarized microhole array interface. Cyclic voltammetry was used to characterize the assisted transfer reaction of perchlorate ions by the $Ni(DBM)_2$ ligand when using the portable sensing device. The current response for the transfer of perchlorate anions by $Ni(DBM)_2$ across the micro-water/gel interface linearly increased as a function of the perchlorate ion concentration. The technique of differential pulse stripping voltammetry was also utilized to improve the sensitivity of the perchlorate anion detection down to 10 ppb. This was acquired by preconcentrating perchlorate anions in the gel layer by means of holding the ion transfer potential at 0 mV (vs. Ag/AgCl) for 30 s followed by stripping the complexed perchlorate ion with the ligand. The effect of various potential interfering anions on the perchlorate sensor was also investigated and showed an excellent selectivity over $Br^-$, $NO_2{^-}$, $NO_3{^-}$, $CO{_3}^{2^-}$, $CH_3COO^-$ and $SO{_4}^{2^-}$ ions. As a final demonstration, some regional water samples from the Sincheon river in Daegu city were analyzed and the data was verified with that of ion chromatography (IC) analysis from one of the Korean-certified water quality evaluation centers.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.243-247
• /
• 2007

User interface is one of important factors to enhance one's presence in virtual reality systems. Due to the performance improvement of hardware, the virtual reality system is extensively utilized in games, broadcastings, educations, cultural contents, and so on. And, it is enlarged the necessity for researches on mobile interface to control the virtual reality system guaranteeing user's unrestricted movement. In this paper, we present a mobile interface, ZA sensor which is constructed with a Zigbee module and a Accelerometer to control the virtual environment. And, we propose a method of constructing the virtual reality system using the ZA sensor as a input device and practical applications of the system.