• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.539-540
• /
• 2021

In this paper, we consider the management scheme of the crowd group in the sensor networks. In the case of the networks searching the critical area, the operation of crowd group can affect the mission implement. The mobile sink system leading the group networks can change the network configuration as the dangerous data gathered from group sensor nodes. The dynamic network management provides the important role to the mission of mobile sink to react the dangerous environments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.73-82
• /
• 2008

Collecting and managing the sensor information through the Internet is critical to effectively manage and utilize the sensor information. The interworking technique of the sensor network and internet is required to realize the desirable condition for managing and utilizing the sensor information. Among many interworking techniques, the translation technique using the gateway had been widely studied. However, the technique which mounts IP-based Internet protocols directly on the sensor node is getting more attention recently. Particularly, IPv6 is suitable for the communication protocol for the sensor network, because its features, such as abundant address space or address auto-configuration, are well matched with the sensor network. In this paper, we design the tiny UDP/IPv6 protocol functions which are suitable for the sensor network environment, and we implemented the functions with TinyOS based nesC. After we examined the simulation results of by using TOSSIM and TinyViz, we carried out the experimental performance evaluation for the program by mounting the tiny UDP/IPv6 on the sensor node (Mote).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.31-38
• /
• 2012

The geo-referencing accuracy of the images acquired by a UAV based multi-sensor system is affected by the accuracy of the mounting parameters involving the relationship between a camera and a GPS/INS system as well as the performance of a GPS/INS system. Therefore, the estimation of the accurate mounting parameters of a multi-sensor system is important. Currently, we are developing a low altitude multi-sensor system based on a UAV, which can monitor target areas in real time for rapid responses for emergency situations such as natural disasters and accidents. In this study, we suggest a system calibration method for the estimation of the mounting parameters of a multi-sensor system like our system. We also generate simulation data with the sensor specifications of our system, and derive an effective flight configuration and the number of ground control points for accurate and efficient system calibration by applying the proposed method to the simulated data. The experimental results indicate that the proposed method can estimate accurate mounting parameters using over five ground control points and flight configuration composed of six strips. In the near future, we plan to estimate mounting parameters of our system using the proposed method and evaluate the geo-referencing accuracy of the acquired sensory data.

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.266-272
• /
• 2001

A coil-type capacitive sensor on which the deterioration of the car engine oil can be in situ measured, has been developed. The sensor was designed to get over 10 pF at the limited space on the drain hole of the oil pan. The design factors for stable capacitance measurement such as coil diameter and winding condition, materials and configuration of the coil former, and shielding method, etc., were known by both computer simulation and experimental investigations. The dielectric properties measured by several sensors for an used sample oil were consisted within 0.25%. The sensor installed on the car having severe vibration, temperature and humidity fluctuation, even electromagnetic noise, has shown very distinguishable results.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.274-279
• /
• 2008

In this paper, we will presents the join procedure for efficient network performance in the ZigBee Sensor Network. In existing network, new devices join procedure is performed base on the participating in the already Coordinator and Router beacon information. However, beacon has insufficient information network. Thus, the concentration of traffic and inefficient use of resources, address the problem that occurs. To solve these problems, the Coordinator and router on the network, depending on their location and the ability to transfer a beacon. This algorithm is proposed in the paper, the transmission time by using the beacon, network configuration control of the network to improve performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2441-2446
• /
• 2009

Wireless Sensor Network collects a data from the specific area and the control is composed of small sensor nodes. Like this sensors to after that is established at the beginning are operated with the battery, the operational duration until several years must be continued from several months and will be able to apply the resources which is restricted in efficiently there must be. In this paper RHC (rounting history cache) applies in Directed Diffusion which apply a data central concept a reliability and an efficiency in data transfer course set. RHC algorithms which proposes each sensor node updated RHC of oneself with periodic and because storing the optimization course the course and, every event occurrence hour they reset the energy is wasted the fact that a reliability with minimization of duplication message improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.510-513
• /
• 2010

In hierarchical wireless sensor network, Sensor nodes forming a cluster with a hierarchy. And there are being study for balanced energy consumption between cluster nodes. When forming network routing path, if there are configured incorrectly then it can be wasting energy. In this paper to solve these problem, We propose that it can consider sensor's communication range to create minimum hop layer when cluster heads configure routing path.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.622-629
• /
• 1988

In order to improve the sensitivity of the wafer type heat flux sensor, some heat flux sensors were manufactured and examined by using thermoelectric semiconductor material (bismuth telluride) whose Seebck coefficient is much larger than those of metallic thermocouple materials. Because the thermoelectric element cannot be bended or welded, a peculiar sensor structure and manufacturing process were designed. As a result, it is revealed that the characteristic sensitivity of the manufactured sensor is about 10 times larger than that of marketed sensor even though there are some troubles in stiffness for reciprocal use. If we make this kind of sensors smaller and thinner, it will be a useful method to measure the local heat flux from the surface of complex configuration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.793-797
• /
• 2004

Wireless sensor networks use battery-operated computing and sensing devices. And It can be expected to be deployed in an ad hoc networs. MAC is different from traditional wireless MACs such as IEEE 802.11 in almost every way. so self-configuration and power saving in sensor network are very important goals, while per-node fairness and latency are less important. In this paper, so we use a given prototype for efficient energy conservation to reduce power consumtion that is one of the important character in sensor network and compare energy consumption and collision with IEEE 802.11 MAC. finally we conclude the paper and analyze it.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.182-185
• /
• 2004

Wireless sensor networks use battery-operated computing and sensing devices. And It can be expected to be deployed in an ad hoc networs. MAC is different from traditional wireless MACs such as IEEE 802.11 in almost every way. so self-configuration and power saving in sensor network are very important goals, while per-node fairness and latency are less important. In this paper, so we use a given prototype for efficient energy conservation to reduce power consumtion that is one of the important character in sensor network and compare energy consumption and collision with IEEE 802.11 MAC. Finally we conclude the paper and analyze it.