• 한국인터넷방송통신학회논문지
• /
• 제15권3호
• /
• pp.137-141
• /
• 2015

모바일 클라우드 컴퓨팅은 모바일 기기의 자원 제약적인 문제를 해결하기 위해 클라우드 서비스를 활용한다. 이렇게 모바일 기기에서 수행해야할 작업을 클라우드로 위임하는 것을 오프로딩이라고 하고 에너지 소모의 관점에서 많은 연구들이 진행되고 있다. 본 논문에서는 응답 시간의 관점에서 오프로딩 기법 적용의 효율성을 측정하기 위해 센 싱 데이터 동기화를 고려한 응답 시간 모델을 설계하였다. 제안 모델에서는 클라우드에서 모바일 기기가 요청한 작업 을 처리할 때 필요한 센싱 데이터에 대한 동기화 작업을 고려하여 정교한 응답 시간 예측을 가능하도록 했으며 모의실험을 통해 새로운 센서 데이터의 발생 비율과 동기화 주기가 응답 시간에 어떤 영향을 주는지를 확인하였다.

• Smart Structures and Systems
• /
• 제18권5호
• /
• pp.885-909
• /
• 2016

Advances in low-cost wireless sensing have made instrumentation of large civil infrastructure systems with dense arrays of wireless sensors possible. A critical issue with regard to effective use of the information harvested from these sensors is synchronized sensing. Although a number of synchronization methods have been developed, most provide only clock synchronization. Synchronized sensing requires not only clock synchronization among wireless nodes, but also synchronization of the data. Existing synchronization protocols are generally limited to networks of modest size in which all sensor nodes are within a limited distance from a central base station. The scale of civil infrastructure is often too large to be covered by a single wireless sensor network. Multiple independent networks have been installed, and post-facto synchronization schemes have been developed and applied with some success. In this paper, we present a new approach to achieving synchronized sensing among multiple networks using the Pulse-Per-Second signals from low-cost GPS receivers. The method is implemented and verified on the Imote2 sensor platform using TinyOS to achieve $50{\mu}s$ synchronization accuracy of the measured data for multiple networks. These results demonstrate that the proposed approach is highly-scalable, realizing precise synchronized sensing that is necessary for effective structural health monitoring.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.245-248
• /
• 2004

In this paper, we propose a framework for synchronization of spatial data between mobile devices and a server by using SyncML(Synchronization Markup Language) that is standard specification for synchronization protocol. We used GML (Geographic Markup Language) to support interoperability of spatial data between various data sources. We also used metadata and catalog service to access and integrate distributed spatial data, considering relationships of spatial data and non-spatial data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.522-525
• /
• 2007

Frame Synchronization is applied to not only digital data transmission for data synchronization between transmitter and receiver but also data communication with satellite. When satellite image data with high resolution and mass storage is transmitted, hardware frame synchronizer for real-time processing or software frame synchronizer for post-processing is used. In case of hardware, processing with high speed is available but data loss may happen for Search of Frame Synchronization. In case of software, data loss does not happen but speed is relatively slow. In this paper, Pending Buffer concept was proposed to cope with data loss according to processing status of Frame Synchronization. Algorithm to process Frame synchronization with high speed using bit threshold search algorithm with pattern search technique and SIMD is also proposed.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.541-568
• /
• 2016

The goal of this study is to investigate the effect of non-synchronous sensing when using wireless sensors on structural identification and to attempt correcting such errors in order to obtain a better identification result. The sources causing non-synchronous sensing are discussed first and the magnitudes of such synchronization errors are estimated based on time stamps of data samples collected from Imote2 sensors; next the impact of synchronization errors on power spectral densities (PSDs) and correlation functions of output responses are derived analytically; finally a new method is proposed to correct such errors. In this correction method, the corrected PSDs of output responses are estimated using non-synchronous samples based on a modified FFT. The effect of synchronization errors in the measured output responses on structural identification and the application of this correction method are demonstrated using simulation examples. The simulation results show that even small synchronization errors in the output responses can distort the identified modal and stiffness parameters remarkably while the parameters identified using the proposed correction method can achieve high accuracy.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.367-370
• /
• 2006

A GPS-based time synchronization technique employing a refined HW circuitry and SW algorithm is considered as fine time-management system for Low Earth Orbit (LEO) remote sensing satellites. By synchronizing the On-Board Time (OBT) within satellites to the GPS 1PPS, a very expensive, highly accurate on-board clock is not required to determine the precise on-board time management. Also, the satellite command generation in ground stations and postprocessing of earth observation data which a particular image is acquired. This paper analyses on-orbit verification of the existing satellite time sync architecture and presents a new time sync architecture, operation and relation between the OBT and the GPS time.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.228-231
• /
• 2008

For a satellite data communication, the technology of frame synchronization is widely used between a sender and a receiver. Last year, we suggested zero-loss frame synchronization [1] using pattern search and using bits threshold search algorithm that is based on SIMD technology [2,3]. This algorithm could solve both of hardware and software drawbacks, which are frame loss and low processing performance. However, this algorithm didn't optimize the processing of output data, synchronized data, which caused overhead to the memory allocation and the memory copy. Consequently, the performance of the frame synchronizer application was degraded. In this paper, we enhance previous work using a circular buffer in order to optimize the output data processing. The performance comparison with the previous algorithm shows that the enhanced proposed approach dramatically outperforms in the output data processing speed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.613-631
• /
• 2013

Cognitive radio (CR) is proposed as a key solution to improve spectral efficiency and overcome the spectrum scarcity. Spectrum sensing is an important task in each CR system with the aim of identifying the spectrum holes and using them for secondary user's (SU) communications. Several conventional methods for spectrum sensing have been proposed such as energy detection, matched filter detection, etc. However, the main limitation of these classical methods is that the CR network is not able to communicate with its own base station during the spectrum sensing period and thus a fraction of the available primary frame cannot be exploited for data transmission. The other limitation in conventional methods is that the SU data frames should be synchronized with the primary network data frames. To overcome the above limitations, here, we propose a spectrum sensing technique based on blind source separation (BSS) that does not need time synchronization between the primary network and the CR. Moreover, by using the proposed technique, the SU can maintain its transmission with the base station even during spectrum sensing and thus higher rates are achieved by the CR network. Simulation results indicate that the proposed method outperforms the accuracy of conventional BSS-based spectrum sensing techniques.

• 문화기술의 융합
• /
• 제6권4호
• /
• pp.813-818
• /
• 2020

최근, 스마트기기의 기술 및 사용자의 급증과 더불어, 스마트워치 시장이 성장하고, 그 효용성 및 사용성이 지속적으로 확대되고 있다. 스마트워치의 강점은 웨어러블 휴대성, 응용의 즉시성, 데이터 다양성 및 실시간성 등이다. 이러한 강점에도 불구하고, 스마트워치는 배터리 제약, 디스플레이 및 사용자 인터페이스 크기 제약, 메모리 제약 등의 한계성을 지닌다. 또한, 개발자 및 표준 디바이스, 운영체제 표준 모델, 킬러 애플리케이션 모듈 등의 보완 필요성이 제기된다. 특히, 스마트워치는 사용자의 생체정보 모니터링 및 응용이 주요한 서비스로 자리하고 있다. 이러한 스마트워치의 생체정보는 실시간 대용량 데이터를 생성한다. 생체정보 서비스의 고도화를 위해서, 센싱 데이터를 원격 스마트폰 또는 로컬서버저장소로 안정적인 피어-투-피어 전송이 수행되어야 한다. 본 연구는 스마트워치 시스템에서 무선 원격 피어-투-피어 전송 안정성을 보장하기 위한 동기화 방법을 제안한다. 이러한 동기화 방법에 기초한 무선피어-투-피어 전송 프로세스를 설계하고, 비동기 전송 프로세스와 제안 동기 전송프로세스를 분석하여 전송량 증가에 따른 전송 효율화 방법을 제안하다.

• 한국융합학회논문지
• /
• 제8권6호
• /
• pp.163-170
• /
• 2017

본 연구는 상호작용 시 유발되는 사회감성 중에 경쟁과 협력을 비접촉 센싱 방법으로 인식하고자 한다. 실험은 경쟁과 협력 상황으로 구분하여 패턴 맞추기 Task를 수행하였다. 데이터 수집은 상반신 영상을 통해 15 Hz 성분의 미동 데이터를 추출하였다. 미동 양과 변화량 그리고 미동의 동조성을 분석하였다. 그 결과 협력 보다 경쟁 시 미동 양과 변화량이 더 큰 것으로 나타났다. 동조성의 경우는 경쟁 보다 협력 시 동조성이 높은 것으로 나타났다. 이는 두 사람이 서로 경쟁 할 때는 이기기 위한 노력을 하고 협력 일 때는 서로 호흡을 맞추기 위한 노력을 하게 되어 움직임에 정도가 차이나는 것으로 볼 수 있다. 본 연구는 생체 반응에 의거한 비접촉식 센싱 방법을 통해 경쟁과 협력의 측정 가능성을 확인하는데 의의가 있다.