• 센서학회지
• /
• 제1권2호
• /
• pp.165-172
• /
• 1992

3가와 5가 이온의 첨가가 전기전도도 및 감응도에 어떤 영향을 미치는가를 확인하기 위하여, In와 Sb를 Tin Oxide에 공침법으로 첨가하였다. Sb는 5가 이온으로 cassiterite 구조에 들어가서 열에너지에 의하여 이들 이온을 여기시켜 전도대로 밀어올리리라고 여겨진다. In 이온은 결정격자 속에 $In^{3+}$로 들어가서 원자가대로 부터 전자를 받게 되고 그러므로써 1가나 2가가 되리라 생각한다. 그러나, 이러한 현상들이 $SnO_{2}$에 존재하는 전위장벽을 2종의 이온첨가에 의하여 일어나는 resistivity에 끼치는 영향과 비교해 볼 때 감응도에는 어떤 영향을 보이는지 고찰하였다.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.155-159
• /
• 2003

The polypyrrole and polyaniline thin film sensors which were made by chemical polymerization were employed to detect ethanol gas. With a single sensor element we can obtain characteristic patterns of behaviour across a very wide frequency range when measuring either resistance or capacitance. Impedance spectroscopy was employed to study the gas sensing behavior of both capacitance and resistance based sensors with conducting polymer as the active sensing element.

• Geomechanics and Engineering
• /
• 제5권2호
• /
• pp.87-97
• /
• 2013

In this paper, a novel fibrous material known as axially reinforced braided composite rods (BCRs) have been developed for reinforcement of soils. These innovative materials consist of an axial reinforcement system, comprised of longitudinally oriented core fibres, which is responsible for mechanical performance and, a braided cover, which gives a ribbed surface texture for better interfacial interactions with soils. BCRs were produced using both thermosetting (unsaturated polyester) and thermoplastic (polypropylene) matrices and synthetic (carbon, glass, HT polyethylene), as well as natural (sisal) core fibres. BCRs were characterized for tensile properties and the influence of core fibres was studied. Moreover, BCRs containing carbon fibre in the core composition were characterized for piezoresistivity and strain sensing properties under flexural deformation. According to the experimental results, the developed braided composites showed tailorable and wide range of mechanical properties, depending on the core fibres and exhibited very good strain sensing behavior.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2688-2695
• /
• 2000

In multi-axis force sensor, compliance matrices representing structural behaviour of internal sensor bodies play an important role in decoupled sensing and accuracy, Recently, error propagation through compliance matrices has been studied via approximation approach. However the upper bound of measured force error has not been known. In this paper, error propagation in force sensing is analysed in a unified way when both strain measurement error and compliance matrix error exist, and the upper bound of the measured force error is derived exactly(not approximately). The analysis is examined through a numerical example.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.434-434
• /
• 2011

Electrochemical method have been employed in this work to modify the chemical vapour deposited nitrogen doped hydrogen amorphous diamond-like carbon (N-DLC) film to fabricate nickel and copper nano particle modified N-DLC electrodes. The electrochemical behaviour of the metal nano particle modified N-DLC electrodes have been characterized at the presence of glucose in electrolyte. Meanwhile, the N-DLC film structure and the morphology of metal nano particles on the N-DLC surface have been investigated using micro-Raman spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy. The nickel nano particle modified N-DLC electrode exhibits a high catalytic activity and low background current, while the advantage of copper modified N-DLC electrode is drawn back by copper oxidizations at anodic potentials. The results show that metal nano particle modification of N-DLC surface could be a promising method for controlling the electrochemical properties of N-DLC electrodes.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1992년도 특별강연 및 추계학술발표 개요집
• /
• pp.7-18
• /
• 1992

The welding technology must fit to the purpose of each construction. The includes a careful understanding of demands, the adapted materials and their behaviour subjected to welding. The manufacturing is very essential too. The education of welding and control personnel will change. The integration of robotics, sensing and automation in the production makes the role of personnel and their responsibility very different. The paper tries to give the state of the art and an estimation for this and possibly the next decade(Fig. 1)

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.275-280
• /
• 2015

New series of phthaloperinone dyes were synthesized by the condensation reaction between tetrachloro-phthalic anhydride, 2,3-naphthalene dicarboxylic anhydride and o-phenylenediamine, 1,8-diaminonaphthalene, 1,2-diaminoanthraquinone. These dyes absorb at around 370-490nm. It was found that introduction of naphthalene and anthraquinone moiety on the perinone system produces a large bathochromic shift of 100nm. The synthesized dye 7 containing anthraquinone moiety in perinone chromophoric system exhibited superior heat stability and bright color as yellow chromophore. New dye 7 have been investigated in terms of interacting with volatile organic compound(VOC) $EtNH_2$. The sensing behaviour of the dye 7 toward $EtNH_2$ was studied by UV-vis absorption spectroscopy. Sensing mechanism of dye 7 to $EtNH_2$ was supported by theoretical calculations based on DFT method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.301-304
• /
• 2005

For detecting an intrusion based on the anomaly of a user's activities, previous works are concentrated on statistical techniques or frequent episode mining in order to analyze an audit data. But, since they mainly analyze the average behaviour of user's activities, some anomalies can be detected inaccurately. Therefore, we propose an anomaly detection method that utilizes an associative classification for modelling intrusion detection. Finally, we proof that a prediction model built from associative classification method yields better accuracy than a prediction model built from a traditional methods by experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.71-75
• /
• 1999

In this paper, we present the 3DOF force-reflecting interface which allows to acquire force of object within a virtual environment. This system is composed of device, virtual environment model, and force-reflecting rendering algorithm. We design a 3 DOF force-reflecting device using the parallel linkage, torque shared by wire, and the controller of system applied by impedance control algorithm. The force-reflecting behaviour implemented as a function position is equivalent to controlling the mechanical impedance felt by the user. Especially how force should be supplied to user, we know using a God-Object algorithm. As we experiment a system implemented by the interface of 3D virtual object and 3DOF force-reflecting interface, we can feel a contact, non-contact of 3D virtual object surface and sensing of push button model.

• 한국도서관정보학회지
• /
• 제35권4호
• /
• pp.229-250
• /
• 2004

본 연구의 목적은 Web OPAC시스템 이용자들의 성격유형과 그들의 탐색행위 및 인터페이스 선호도 간에는 어떤 상관관계가 있는지를 분석하는 것이다. 데이터 수집은 이용자들의 성격유형을 파악하기 위해서는 MBTI를 사용하였고, 이들의 Web OPAC시스템 탐색행위와 인터페이스 선호도를 측정하기 위해서는 총28개 요소들로 이루어진 자체개발한 온라인 설문지를 사용하였다. 이 실험에는 K대학교 재학생 48명이 자발적으로 참여하였고, 이들의 성격유형은 MBTI 4가지 선호지표인 외향성-내향성, 감각형-직관형, 사고형-감정형, 그리고 판단형-인식형으로 코딩 하였다. 수집된 데이터는 SPSS Windows Ver. 11.0을 사용하여 분석하였고, 상관 관계 분석을 위하여 Pearson의 상관계수(r)를 사용하였다. 데이터분석 결과 이용자들의 MBTI 선호지표와 9개 Web OPAC 탐색행위 및 인터페이스 선호도 요소들 간에 통계적으로 유의한 수준의 상관관계를 보였다.