• 제목/요약/키워드: semi-solid

검색결과 480건 처리시간 0.034초

Magnetorheological elastomer base isolator for earthquake response mitigation on building structures: modeling and second-order sliding mode control

  • Yu, Yang;Royel, Sayed;Li, Jianchun;Li, Yancheng;Ha, Quang
    • Earthquakes and Structures
    • /
    • 제11권6호
    • /
    • pp.943-966
    • /
    • 2016
  • Recently, magnetorheological elastomer (MRE) material and its devices have been developed and attracted a good deal of attention for their potentials in vibration control. Among them, a highly adaptive base isolator based on MRE was designed, fabricated and tested for real-time adaptive control of base isolated structures against a suite of earthquakes. To perfectly take advantage of this new device, an accurate and robust model should be built to characterize its nonlinearity and hysteresis for its application in structural control. This paper first proposes a novel hysteresis model, in which a nonlinear hyperbolic sine function spring is used to portray the strain stiffening phenomenon and a Voigt component is incorporated in parallel to describe the solid-material behaviours. Then the fruit fly optimization algorithm (FFOA) is employed for model parameter identification using testing data of shear force, displacement and velocity obtained from different loading conditions. The relationships between model parameters and applied current are also explored to obtain a current-dependent generalized model for the control application. Based on the proposed model of MRE base isolator, a second-order sliding mode controller is designed and applied to the device to provide a real-time feedback control of smart structures. The performance of the proposed technique is evaluated in simulation through utilizing a three-storey benchmark building model under four benchmark earthquake excitations. The results verify the effectiveness of the proposed current-dependent model and corresponding controller for semi-active control of MRE base isolator incorporated smart structures.

Effects of in vitro culture types on regeneration and acclimatization of yellow poplar (Liriodendron tulipifera L.) from somatic embryos

  • An, Chan Hoon;Kim, Yong Wook;Moon, Heung Kyu;Yi, Jae Seon
    • Journal of Plant Biotechnology
    • /
    • 제43권1호
    • /
    • pp.110-118
    • /
    • 2016
  • We compared germination efficiency for somatic embryos (SE) of Liriodendron tulipifera using semi-solid (SS), temporary immersion bioreactors (TIB), and continuous immersion bioreactors (CIB) to produce vigorous plants. The bioreactors were designed to be immersed in liquid media with plantlets with an adjustable immersion time. TIB and CIB improved germination rates up to 80.86% and 95.21%, respectively, however, CIB produced more hyperhydric plantlets than TIB. The height of plantlets in TIB was significantly higher than for those in CIB. Fresh weights of plantlets grown in CIB of were significantly lower than for those grown in TIB. The lowest chlorophyll concentration was found in in vitro plantlets from CIB. We examined abnormally developed leaves, stems, and apical zones of in vitro plantlets that were produced in CIB. Among the three types, SS showed the highest stomatal density and the shortest stomatal length in in vitro plantlets. After acclimatization, plants from CIB exhibited the lowest values in biomass, such as height, root collar diameter, leaf fresh weight, leaf length, leaf width, petiole length, petiole diameter, and leaf area. Photosynthesis and transpiration rates of ex vitro plants were not significantly different among the three culture types, but stomatal conductance was higher in TIB than in the SS and CIB. Therefore, the results suggest that TIB is the preferable bioreactor to improve in vitro plantlet regeneration of L. tulipifera. TIB-originated plants showed higher growth rate than SS and CIB after transferring to soil.

강릉지역 영유아의 이유 실태에 관한 조사연구 (A Study on Weaning Practice of Infants in Kangnung Area)

  • 김은경;이선희;박계월;지경아
    • 한국식생활문화학회지
    • /
    • 제14권5호
    • /
    • pp.555-563
    • /
    • 1999
  • This study was executed for 300 mothers bringing up a child below 3 years in the area of Kangnung to assess the current weaning practice of infants. 24.6% of mother surveyed were breast-fed, 57.8% were formula-fed and 17.5% were mixed-fed. The rate of breast feeding was lower and the rate of bottle feeding was higher in infants whose mothers had more income or higher educational period or full-time job. Most of the respondents knew the significance of supplementary food. 41.4% of the subjects started weaning of their infants at 3-4 months, and 84.1% of them set on weaning in less than 7 months after babies were born. And 39.4% of the subjects finished weaning of their infants in less than one year. The infants of this study preferred the fruits and fishes to meats, vegetables and beans that served to them as supplementary food. Mothers showed deep interest in recipe of weaning food(48.5%), adequate quantity of weaning food(36.3%), information on commercial food for infants(32.2%), and sequence in which semi-solid food are introduced(31.9%). From these results, it is suggested that education program in primary health center for improvement of weaning practice of infants should be implemented reflecting needs of mothers.

  • PDF

상수도의 수질관리와 타소소독의 잔류효과에 관한 연구 (Study on the Water Quality Control of Water Supply the Reside: Effects of Chlorinations)

  • 유귀현
    • 환경위생공학
    • /
    • 제6권2호
    • /
    • pp.33-47
    • /
    • 1991
  • 1. Water supply treatment plants personnel could not test the water quality control, because most of them rely on the provincial health laboratories about water quality rely rant test. However, in future, plants have to been provided the facilities and equipment of water quality laboratory. 2. Chlorination methods are 89.5% of liquid chlorine and 10.5% of solid chlorine, and the cost per 1 $\m^{3}$ of chlorination is about 1.30 won which chlorination cost is very cheap as 1/142 of drinking water production cost. Input method of chlorine is 35% of automatic method, 56% of semi-automatic, and 9% of other methods, and this is no problem 3. Residual effects of chlorination, in the case of distilled water as a standardized material and 0.2 ppm of seperated residual chlorine, were continued 32 hours in $0^{\circ}C$, and 25 hour in $20^{\circ}C$, of water temperature and in the case of 0.4 ppm of seperated residual chlorine were continued 47 hours in $0^{\circ}C$ and 23 hours in $20^{\circ}C$. 4. In the case of 4 ppm of seperated residual chlorine, residual effects were continued 23 hours in $5^{\circ}C$, 90 hours in $10^{\circ}C$, 78 hours in $15^{\circ}C$, and 60 hours in $20^{\circ}C$ : by the temper; lure of water, continuing residual effects of chlorination are different, so we have to car for the warm season chlorination in the hider temperature. 5. Chlorination effects of drinking waters in the case of 0.4 ppm of seperated residual chlorine were continued 237 hours in $22^{\circ}C$ water : and in the case of rechlorination as 4 ppm of residual chlorine, continued 71 hours in $22^{\circ}C$ water.

  • PDF

Shoot multiplication kinetics and hyperhydric status of regenerated shoots of gladiolus in agar-solidified and matrix-supported liquid cultures

  • Gupta, S. Dutta;Prasad, V.S.S.
    • Plant Biotechnology Reports
    • /
    • 제4권1호
    • /
    • pp.85-94
    • /
    • 2010
  • In vitro shoot regeneration of gladiolus in three different culture systems, viz., semi-solid agar (AS), membrane raft (MR), and duroplast foam liquid (DF) cultures was evaluated following the kinetics of shoot multiplication and hyperhydricity at optimized growth regulator combinations. Compared to the AS system, matrixsupported liquid cultures enhanced shoot multiplication. The peak of shoot multiplication rate was attained at 18 days of incubation in the MR and DF systems, whereas the maximum rate in the AS system was attained at 21 days. An early decline in acceleration trend was observed in liquid cultures than the AS culture. The hyperhydric status of the regenerated shoots in the different culture systems was assessed in terms of stomatal attributes and antioxidative status. Stomatal behavior appeared to be normal in the AS and MR systems. However, structural anomaly of stomata such as large, round shaped guard cells with damage in bordering regions of stomatal pores was pronounced in the DF system along with a relatively higher $K^+$ ion concentration than in the AS and MR systems. Antioxidative status of regenerated shoots was comparable in the AS and MR systems, while a higher incidence of oxidative damages of lipid membrane as evidenced from malondialdehyde and ascorbate content was observed in the DF system. Higher oxidative stress in the DF system was also apparent by elevated activities of superoxide dismutase, ascorbate peroxidase, and catalase. Among the three culture systems, liquid culture with MR resulted in maximum shoot multiplication with little or no symptoms of hyperhydricity. Shoots in the DF system were more prone to hyperhydricity than those in the AS and MR systems. The use of matrix support such as membrane raft as an interface between liquid medium and propagating tissue could be an effective means for rapid and efficient mass propagation with little or no symptoms of hyperhydricity.

연고제(軟膏劑)의 경도(硬度)에 관(關)한 연구(硏究) ( II ) -약전수재연고제(藥典收載軟膏劑)의 외견상(外見上)의 대수경도(對數硬度)- (The Study Concerned with the Hardness of Ointment ( II ) -The Apparent Logarithmic Hardness of Ointment Registered on the Pharmacopea of Korea-)

  • 김종갑;이숙향
    • Journal of Pharmaceutical Investigation
    • /
    • 제4권1_2호
    • /
    • pp.39-45
    • /
    • 1974
  • According to previous paper, the hardness of semi-solid as ointments and suppositories causes the tough or skin, the pain and connected with absorption, the state of spread or the efficiency of drug. When the hardening agent or the softening agent is added to ointment whid, is registered on the pharmacopeia of the republic of Korea, the experimertal data by apparent logarithmic hardness are shown is Table 1. The results are as the folloring. 1) In case of the softening agent which is added to ointment base, each has shown two different equation with differnented slope as $K_1$ and $K_2$ value determined (Fig. 1,2). 2) When the hardening agent is added to same ointment base, these studies indicated that there is a direct correlation between $K_1$ and $K_2$. However, in case of softening agent $K_1$ and $K_1$ are not correlated as indicated in Fig. $3{\sim}8$. 3) On condition of same ointment base, the critical poit is proportional to $K_1$ 4) The second effect is at least $3{\sim}17$ times more. sensitive than the first effect or in average 8.3 times more sensitive, Therefore, the results presented in this paper. Suggest that, when the drug is added to a certain ointment base, it should be added within this first effect before the critical point is reached.

  • PDF

Mechanical Behavior of Directionally Solicified (Y2O3)ZrO2/Al2O3 Eurtctic Fibers

  • Park, Deok-Yong;Yang, Jenn-Ming
    • 한국세라믹학회지
    • /
    • 제41권1호
    • /
    • pp.1-8
    • /
    • 2004
  • The microstructural features and mechanical behavior of directionally solidified $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fibers after extended beat treatment in oxidizing environment were investigated. The fiber was grown continuously by an Edge-defined Film-fed Growth (EFG) technique. The microstructure was characterized using X-Ray Diffraction (XRD) and Scanning Electron Microscopy(SEM). The microstructure of the fiber in the as-fabricated state consists of highly oriented colonv and fine lamellar microstructure along the fiber axis. Tensile strength of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber remained unchanged with heat treatment at temperatures between $1200^{\circ}C$ and $1500^{\circ}C$ up to 300h. The weibulls modulus remained fairly constant after extended thermal exposure. The fracture toughness and crack propagation behavior were investigated. The fracture toughness ($K_{1C}$) of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber in the as-fabricated state were measured to be 3.6 ${\pm}$ 0.5 MPa${\cdot}m^{1/2}$ by an indentation technique and 2.2 ${\pm}$ 0.2 MPa${\cdot}m^{1/2}$ by assuming elliptical flaw of a semi-infinite solid, respectively. The $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber showed a radial (Palmqvist) crack type and exhibited an orthotropic crack growth behavior under 100 g load.

레시틴 오가노겔을 이용한 난용성 제니스테인의 용해도 향상 (Development of Lecithin Organogel to Improve Solubility of Genistein)

  • 이수진;김정아;강내규;박선규;이천구
    • 대한화장품학회지
    • /
    • 제41권3호
    • /
    • pp.201-208
    • /
    • 2015
  • 오가노겔은 반고형상이며 3차원의 네트워크 구조로 이루어진 친유성 용매로 이루어져 있다. 본 연구에서는 유상과 수상에서 모두 난용성 특징을 가진 제니스테인을 포함하는 레시틴 오가노겔을 개발하였다. 이 시스템은 안정할 뿐만 아니라 경피 흡수 실험에서도 높은 흡수율을 보였다. 본 오가노겔 제형에 적합한 원료들을 선별한 결과, 수화된 레시틴, 해바라기유, dipropylene glycol (DPG), polyethylene glycol (PEG)이 이 시스템에서 주로 사용되었다. 레시틴 오가노겔의 제조에 적합한 원료의 함량은 phase ternary diagram 작성을 통하여 결정하였다. 제조된 레시틴 오가노겔을 organoleptic characteristics, stability, pH, rheology, phase transition temperatures, microscopic analysis, skin penetration 실험을 통해 평가하였다. 본 연구 결과를 통해 본 논문에서 제시하는 레시틴 오가노겔 제형은 안정한 상태에서 난용성 물질을 높은 농도로 피부에 효과적으로 전달할 수 있는 제형으로 활용될 수 있을 것이라 생각된다.

반고형제제의 유동특성에 관한 연구 (제2보) : 바셀린의 온도의존성 유동거동 (Studies on The Flow Properties of Semi-Solid Dosage Forms (II) : Temperature-Dependent Flow Behavior of Vaseline)

  • 김정화;송기원;장갑식;이장우;이치호
    • 약학회지
    • /
    • 제41권1호
    • /
    • pp.38-47
    • /
    • 1997
  • Using a concentric cylinder type, rheometer. the steady shear flow properties of vaseline were measured over the temperature range of 20~70${\circ}$C. In this paper, the shea rate and temperature dependencies of its flow behavior were investigated and the validity of some flow models was examined. In addition, the flow characteristics over a wide temperature range were quantitatively evaluated by calculating the various material parameters. Main findings obtained from this study can be summarized as follows: (1) At relatively lower temperature range, vaseline is a plastic fluid with a yield stress and its flow behavior shows shear-thinning characteristics. (2) As the temperature increases, the value of a yield stress and the degree of shear-thinning become smaller, consequently, the Newtonian flow behavior occurs at a lower shear rate range. (3) At temperature range lower than 45${\circ}$C, the flow behavior shows much stronger temperature dependence, and a larger activation energy is needed for flow. (4) The Herschel-Bulkley model is the most effective one g$^3$ to predict the flow behavior of vaseline having a yield stress. The validity of the Bingham and Casson models becomes more available with increasing temperature. The flow behavior of vaseline at temperature range higher than 45${\circ}$C can be perfectly described by the Newton model.

  • PDF

Studies on Anti-cancerous Substances from Higher Plane in East Asian Region

  • Takeya, Koichi
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 1999년도 The 6th International Symposium on the Development of Anti-Cancer Resource from Plants
    • /
    • pp.1-45
    • /
    • 1999
  • To date many kinds of compounds have been obtained from plants kingdom as antineoplastic and anti-cancerous agents. However, there is no special type of compounds for ncancer therapy. Various types of substances are effective for various types of cancers and tumors: for instance, alkaloids, lignans, terpenes and steroids etc. Curcumol obtained from Curcuma aromatica was tested and noticed to be effective against cancer of the uterine cervix clinically Oridonin isolated from Rabdosia ssp.is now investigated for clinical trials in China. Moreover, camptothecine isolated from Camptotheca acuminata is also antineoplastic alkaloid, but is very toxic. Chemical modification has been tried to decrease its toxicity. This compound is now using as clinical agent. Harringtonin was investigated as an anticancerous drug in China. Taxol, a compound with a taxane ring isolated from the bark of Taxus brevifolia, has been demonstrated to have substantial anticancer activity in patients with solid tumors refractory standard chemotherapy. Supply of this drug has severely limited full exploration of its antineoplastic potential. Some efforts are continued in National Cancer Institute NCI) Washington for surveying various Taxus species for optimal taxol content, improvement in semi-synthesis from baccatin III, improvement in method of extraction, and development of alternative renewable resources. Further, there are many compounds which have been reported as antineoplastic agents. On the other hand, we have screened on higher plants collected in Japan, China, Korea, Southeast Asia and South America for antineoplastic activity, which has been done using Sarcoma 180 ascites in mice, P388 Iymphocytic leukemia in mice, Chinese hamster lung V-79 cells, P388 cells and nasopharynx carcinoma (KB) cells in our laboratory, as primary screening. In this meeting, I will present on antitumor and cytotoxic substances of the higher plants (Rubia cordifolia, Ailanfhus Vilmoriniana, Aster tataricus, Taxus cuspidata var. nana, Cephalotaxus harringtonia var drupacea, etc.) selected from above screening tests.

  • PDF