• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.336-341
• /
• 2008

The objective of this research was to investigate the suitable cultivar for organic strawberry (Fragaria ananassa Duch.) cultivation in Korea. The six strawberry cultivars which were bred and commonly cultivated in Korea as forcing and semi-forcing culture were tested in this experiment. To achieve the objectives, various characteristics of these cultivars were investigated for two consecutive years such as growth habit, yield, fruit quality and occurrence rate of disease/pest. As results of this research, the total yield of 'Seolhyang' was the highest among cultivars tested in both forcing and semi-forcing cultivation. The average of soluble solid contents (SSC) in 'Seolhyang' was $12.0^{\circ}Bx$ that is lower than other cultivars and especially below $10^{\circ}Bx$ after March (high temperature period). But there was not much difference in SSC among 6 cultivars until the end of February. The average of hardness in 'Seolhyang' was 279g/${\phi}5\;mm$ which was a little higher than that of 'Akihime'. Titration acidity (TA) in 'Maehyang' was 0.69% which was the highest value among 6 cultivars. Total fresh/root weight of 'Seonhong' and leaf area of 'Seolhyang' were significant among other cultivars' ones in forcing culture. Growth habits (fresh weight, root weight, leaf area, etc.) showed no significant difference among cultivars in semi-forcing culture. The lowest occurrence rate for powdery mildew and aphids was found in 'Seolhyang', but gray mold was severer than other cultivars. The density of two spider mites was the lowest in 'Redpearl'. We have concluded that 'Seolhyang' is the most suitable cultivar for organic strawberry cultivation by the result of yield, fruit quality and resistance of disease/pest.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1183-1196
• /
• 2018

Objective: This study ascertained effects of roughage quality, period of day at meal termination and time lapse after feeding on digesta load in the rumen. Methods: Veld hay was untreated (poor roughage quality, PRQ), improved (improved roughage quality, IRQ) by treating with urea or semi-improved by spraying with urea (semi-improved roughage quality, SIRQ). Experiment 1a used four rumen fistulated sheep to determine in-sacco degradability. Twelve sheep ($56.3{\pm}4.59kg$) were blocked by weight and randomly allocated to IRQ (n = 6) and PRQ (n = 6) to determine solid and liquid passage rates. In experiment 1b, nine sheep ($37.6{\pm}9.34kg$) were blocked by weight and randomly allocated to IRQ (n = 4) and PRQ (n = 5) to determine digestibility. Sixteen sheep ($36.47{\pm}9.46kg$) were blocked by body weight and randomly allocated to IRQ (n = 8) and PRQ (n = 8). Two sheep were slaughtered for each sampling time in each treatment (IRQ and PRQ) at 0, 6, 12, and 24 h after feeding to determine rumen load. In experiment 2, eighteen goats ($25.4{\pm}9.08kg$) were blocked by weight and randomly allocated to IRQ (n = 6), SIRQ (n = 6), and PRQ (n = 6). Then all 18 goats were slaughtered soon after meal termination in the morning; afternoon and evening to determine the effect of period of day on rumen fill. Results: Rate of degradation and effective degradability were enhanced by improvement of roughage quality. Roughage quality had no effect on digestibility, but digestibility was higher in goats than sheep. Fractional passage rate of particles was higher for IRQ than PRQ, but similar for liquids. Digesta fractional clearance rates at 24 h after feeding were 0.018/h (IRQ) and 0.006/h (PRQ). Period of day had an influence on rumen load. Neutral detergent fibre load for goats were above 2.03 kg/100 kg body weight for all diet treatments. Conclusion: Following starvation, passage rate had negligible effects on emptying of rumen load.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.19-32
• /
• 2010

Electrolytic reduction technology is essential for the purpose of adopting pyroprocessing into spent oxide fuel as an alternative option in a back-end fuel cycle. Spent fuel consists of various metal oxides, and each metal oxide releases an oxygen element depending on its chemical characteristic during the electrolytic reduction process. In the present work, an electrolytic reduction behavior was estimated for voloxidized spent fuel based on the assumption that each metal-oxygen system is independent and behaves as an ideal solid solution. The electrolytic reduction was considered as a combination of a Li recovery and chemical reactions between the metal oxides such as uranium oxide and the produced Li metal. The calculated result revealed that most of the metal oxides were reduced by the process. It was evaluated that a reduced fraction of lanthanide oxides increased with a decreasing $Li_2O$ concentration. However, most of the lanthanides were expected to be stable in their oxide forms. In addition, a semi-empirical model for describing $U_3O_8$ electrolytic reduction behavior was proposed by considering Li diffusion and a chemical reaction between $U_3O_8$ and Li. Experimental data was used to determine model parameters and, then, the model was applied to calculate the reduction yield with time and to estimate the required time for a 99.9% reduction.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.459-465
• /
• 2012

This study analyzed the effect of semi-rigid rafter-purlin cross-linking connection and driven steel pipe base on the static behavior of plastic greenhouse (PG). To promote the time and cost efficiency of the assembly process, each cross-linking connections of space arch type grid that consists of rafter and purlin is linked with steel-wire buckles, and each end of the rafters was driven directly to the ground to support the PG structure. However, in the design process, cross-linking connections and bases are idealized by being categorized as fully rigid or frictionless pinned, which does not appropriately reflect actual conditions. This study takes a full-scale loading test of PG and analyzes the effect of member cross-linking connections and driven steel pipe base on the behavior of a structure. The analysis provided a basis for determining the rigidity factor of member cross-linking nodes needed for finite element analysis, and the reliability of the result regarding the static behavior of PG.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.244-253
• /
• 2021

This study aimed to investigate quality characteristics of hot-air dried persimmon during the drying period in 'Bansi' and 'Godongsi'. These cultivars were classified into four grades: 2L, L, M, and S based on the fruit weight. Weight loss, firmness, soluble solid content (SSC), and moisture contents were measured during the hot-air drying period. The weight loss significantly increased during the drying period (p<0.05), while there was no difference between cultivars. In the initial drying period, the firmness decreased due to softening during the ripening stage and increased significantly due to hardening during the water loss stage. Regardless of the cultivars, the SSC increased from 19.6% in the initial period to 55.3% at 12 days after drying. Moisture content statistically decreased in both cultivars over the whole drying period. It took 4 days and 8~10 days to produce semi-dried persimmon (45~55% moisture content) and dried persimmon (25~35% moisture content) in both cultivars. These results could be effectively used as basic data for producing high-quality semi-dried and dried persimmons using the hot-air drying method in 'Bansi' and 'Godongsi'.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.356-361
• /
• 2018

It is common to analyze volatile organic compound (VOC) or semi-VOC (SVOC) in a sample composed of a complex matrix consisting of multiple components such as bloods through a separation process. Adsorption is a physical phenomenon in which certain components accumulate on the surface of other phases. In order to overcome difficulties in the pretreatment process, an adsorption is frequently used. Solid phase microextraction (SPME) equipment with porous carbon carboxen (CAR) is an example of adsorption application. In this study, the adsorption of 4-octylphenol to carboxen was examined. To do so, the extraction efficiency for such solvents as dichloromethane ($CH_2Cl_2$, DCM), ethylacetate ($CH_3COOC_2H_5$, EA) and diethylether ($C_2H_5OC_2H_5$, $Et_2O$) was studied and also the derivatization reaction for 4-octylphenol with reagents of bistrimethylsilyltrifluoroacetamide (BSTFA), methylchloroformate (MCF) and pentafluorobenzylbromide (PFBBr) was compared. The combination of DCM and BSTFA showed good performance thus they were adopted for this study. Thermodynamic adsorption experiments showed that the adsorption process was endothermic and Freundlich isotherm equation was more suitable than Langmuir isotherm. It was also found that the adsorption followed a pseudo-$2^{nd}$ order kinetic model.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1205-1214
• /
• 2005

This study was carried out to investigate the emission characteristics of volatile metals(Hg, As, Se) and semi volatile metals such as Pb from small and medium size municipal solid waste incinerators(MSWIs). The concentrations of Hg, Pb, As and Se in emission gas from small size waste incinerators were higher than those of medium size waste incinerators. This is probably due to less air pollutant control devices and high emission gas temperature of the small size waste incinerators relative to the medium size waste incinerators. Emission gas temperature from small and medium size waste incinerators were divided into 2 groups. The first group was about $100^{\circ}C$ and the second roup in the range of $400{\sim}700^{\circ}C$. The concentrations of emission gas at the second group were Hg $70.43\;{\mu}g/Sm^3$, Pb $0.94\;{\mu}g/Sm^3$, As $9.83\;{\mu}g/Sm^3$ and Se $5.05\;{\mu}g/Sm^3$. The concentrations of Hg, Pb, As and Se at the first group were lower than those found at the second group. Besides, the removal efficiencies of Hg in medium size waste incinerators were $55.2{\sim}95.9%$. Emission gas temperature reduction from waste heat boiler(WHB) contribute to control of Hg. Based on above results, we postulate that the temperature of flue gas should play a very important role in volatile metal control in small and medium size MSWIs. In order to improve the volatile metals removal efficiency, the temperature of cooling system must be controlled and the air pollution control device should be operated properly.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.308-314
• /
• 2014

The storage characteristics of milled rice produced using the dry-type (DT), semi-dry-type (SDT), and wet-type (WT) systems were studied. Immediately after rice was milled with these systems, storage experiments on the milled rice were conducted for 12 weeks at three temperatures (10, 20, and $30^{\circ}C$). As the storage period increased, the color (b value) and the fat acidity slowly increased, and the whiteness, moisture content, turbidity, solid matter, and number of total bacteria decreased. The effects of the storage temperature on the moisture content, total number of bacteria, and fat acidity were greater than those of the milling system type. The high storage temperature showed greater potential for increasing the moisture content and the fat acidity and decreasing the total number of bacteria. The initial moisture content of the sample produced using the WT milling system was higher than that of the other samples. Also, the initial turbidity and solid matter of the WT system sample were lower than those of the other samples, but the degree of the decrease was similar to that of the others as the storage period passed. These results showed that the system type and the storage temperature are important factors in the safe storage of wash-free rice. Specifically, the wet type milling system affected the initial quality properties, which made its safe storage period shorter than in the other types.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.167-174
• /
• 2022

This study investigates the behavior of a jointless bridge that integrates superstructure and abutment without an expansion joint. Based on the sensitivity analyses conducted in previous studies, a shell-based model was determined to be the most suitable numerical analysis model for jointless bridges due to the similarity of the model's results compared with the obtained displacement shape, which was influenced by relative errors, precision, and practical aspects. Accordingly, the behavior of a jointless bridge was analyzed at various wall depths using shell element-based and solid element models. In addition, the results of MIDAS Civil and ABAQUS analysis programs were compared. In the case of semi-integrated bridges (A and B), the displacement decreased as the wall depth increased due to the ground reaction force in Case 1 under a linear spring condition and +30℃. In the case where temperature was -30℃, the change in displacement was small because the ground reaction did not occur. As for bridge C (a fully integrated alternating bridge) and bridge D (an integrated chest wall alternating bridge), the displacement decreased as the wall depth increased at both +30 and -30℃ due to pile resistance. As for the comparison between the analysis programs used, the relative error in Case 1 was small, whereas a significant difference in Case 2 was observed. The foregoing variation is possibly due to the difference in the application of the nonlinear spring in the programs.

• Corrosion Science and Technology
• /
• v.14 no.2
• /
• pp.76-84
• /
• 2015

The components in ultra super critical (USC) steam turbine, which is under development for high efficient power generation, are encountering harsher solid particle erosion by iron oxide scales than ones in the existing steam turbines. Therefore, the currently used boride coating will not be able to hold effective protection from particle erosion in USC system and should be replaced by new particle erosion resistant coatings. One of the best protective coatings developed for USC steam turbine parts was found to be vanadium-boride (V-boride) coating which has a hardness of about 3000 HV, much higher than that of boride, 1600~2000 HV. In order to evaluate particle erosion resistance of the various coatings such as V-boride, boride and Cr-carbide coatings at high temperature, particle erosion test equipments were designed and manufactured. In addition, erosion particle velocity was simulated using FLUENT software based on semi-implicity method for pressure linked equations revised (SIMPLER). Based on experimental results of this work, the vanadium-boride coating was found to be superior to others and to be a candidate coating to replace the boride coating.