• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.803-810
• /
• 1992

With increases in the rotational speed of hydraulic machine, studies on the hydrodynamic characteristics of supercavitating cascade are important on the view of flow analysis and design of fluid machinery. In the present paper, the complex functions of nonlinear theory corresponding to the flow of supercavitating cascade can be obtained by distributing singulary singulary points such as sources, vortexes and doublets on hydrofoil and free streamline. The numerical calculations on the closed wake model and semi-closed wake model are carried out in order to show the flow characteristics around the supecavitating cascade with finite with finite cavity length. As the result of this study, the flow characteristics such as lift, drag and cavitation coefficients are predicted by the flow conditions of supercavitating cascade in the fluid machinery.

• Structural Engineering and Mechanics
• /
• v.31 no.1
• /
• pp.39-56
• /
• 2009

Vibration is an undesirable phenomenon in a dynamic system like lightly damped aerospace structures and active vibration control has gradually been employed to suppress vibration. The objective of the current investigation is to introduce an active torsional magneto-rheological (MR) fluid based damper for vibration control of a typical nose landing gear. They offer the adaptability of active control devices without requiring the associated large power sources. A torsional damper is designed and developed based on Bingham plastic shear flow model. The numerical analysis is carried out to estimate the damping coefficient and damping force. The designed damper is fabricated and an experimental setup is also established to characterize the damper and these results are compared with the analytical results. A typical FE model of Nose landing gear is developed to study the effectiveness of the damper. Open loop response analysis has been carried out and response levels are monitored at the piston tip of a nose landing gear for various loading conditions without damper and with MR-damper as semi-active device. The closed-loop full state feedback control scheme by the pole-placement technique is also applied to control the landing gear instability of an aircraft.

• Phonetics and Speech Sciences
• /
• v.9 no.4
• /
• pp.107-114
• /
• 2017

The purpose of the current study was to compare selected acoustic and electroglottographic measures (closed quotient, pitch, and loudness) among vowel phonation, traditional voiced lip trill ($VLT_T$), modified voiced lip trill methods ($VLT_M$). A total of 21 participants without voice complaints produced 4-second long samples using each phonation method. Results indicated that mean closed quotient of $VLT_M$ was higher than that of vowel phonation and $VLT_T$, while its range and standard deviation measures were higher than those of vowel phonation. Mean, range, standard deviation, maximum of pitch measures of $VLT_M$ were higher than those of vowel phonation. Lastly, mean and maximum loudness of the $VLT_M$ were higher than $VLT_T$. In conclusion, the current data indicate the possibility to use the $VLT_M$ as a training method for singing or a strategy to facilitate generalization effect of voice therapy. Current results also reflect the necessity for further study pertaining to the long-term effect of the $VLT_M$ training method. Clinical implications are discussed.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.273-278
• /
• 2000

The hybrid heat pump system of the air to air and / or air to water was composed and its COP was analyzed with the ambient temperature on the opened and closed loop system respectively. The results be indicated by the equation(7) that the COP(Coefficient of Performance) of air-source(air to air and / or air-water) heat pump is effected with the ambient air temperature and AVACTHE.(Automatic Variable Area Capillary Type Heat Exchanger) 2. The COP of air-to-water heat pump without AVACTHE decreased in accordance with the ambient temperature decrease, however in case of the heat pump with AVACTHE the COP was maintained at 2.8∼3.0 level when the ambient temperature decrease from -$5^{\circ}C$ to $-11^{\circ}C$. 3. The COP of the air-to-water heat pump operated on the open loop was higher 40∼58% than that of the heat pump operated on the close loop. 4. The lower ambient temperature air effect on the COP of the air-to-air heat pump operated on the semi closed loop could be controlled using the AVACTHE, and at the high ambient air temperature the COP increased using the Bypass circuit.

• International Journal of Computer Science & Network Security
• /
• v.24 no.1
• /
• pp.187-195
• /
• 2024

This is an extended paper explaining the role of E-learning and quality development in the current situation. Amid Covid:19, E-Learning has achieved a new miles stone in imparting education and all levels of institutions have transformed their learning platform from face to face to virtual learning. In this scenario E-Learning is facing two major challenges, first to ensure the ability of computer systems or software to exchange and make use of information on virtual platform (interoperability) and secondly, developing quality learning through e-Learning. To impart learning and teaching (L&T) through E-learning, Middle East University (MEU) has adopted Learning Management Services (LMS) through Blackboard. The university has three types of L&T methods; full online, Blended and Supportive. This research studies the concept, scope and dimensions of interoperability (InT) of E-Learning in MEU then the connection and interdependence between with quality development. In this paper we have described the support and the importance of finest standards and specifications for the objectives of InT of E-Learning and quality development in MEU. The research is based principally on secondary data observed from MEU E-Learning deanship. Also sample of 20 E-Learning experts at MEU were given closed ended as well as semi closed questionnaires for evaluating the assurance of InT of E-Learning and quality development. These experts are mainly certified online facilitators and admin staff. Results provide the verification of application and presence of InT of E-Learning and assured the quality development process in MEU.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.185-190
• /
• 2011

In marine controlled-source electromagnetic (CSEM) modeling, it may be difficult to evaluate primary fields accurately using conventional linear filters because they decay very rapidly with distance. However, since there exists a closed-form solution to the Hankel transform in TM mode for a homogeneous half space, we can assess the accuracy of linear filters for evaluating the Hankel transform. As a result, only nine out of 36 source-receiver pairs show that EM fields decrease linearly in semi-log scale with an increase of source-receiver distance, while EM fields are either 0 or not reduced significantly due to an effect of the air layer. There also exist closed-form solutions for the nine pairs, and the others can be evaluated accurately with a relatively short filter. This paper proposes a method which uses closed-form solutions for TM-mode Hankel transforms and a filter with 61 coefficients for TE-mode ones.

• Journal of the Korean Society of Safety
• /
• v.22 no.4
• /
• pp.13-19
• /
• 2007

An numerical method to estimate thermal diffusivity has been developed for one-dimensional unsteady heat conduction problem, when the temperatures are know at two positions in a semi-infinite body. Using the closed form solution which has already derived an explicit solution for the inverse problem for one-dimensional transient heat conduction using Laplace transform technique, we first estimate the surface temperature. The thermal diffusivity can be estimated by using the estimated surface temperature and measured temperatures, which include some uncertainties. The estimated surface heat flux and thermal diffusivity are found to be in good agreement with those of the experimented conditions. This method will be extended to the simultaneous measurement of thermal diffusivity and thermal conductivity.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.530-535
• /
• 2004

This paper considers a state set estimation (SSE) based model predictive control (MPC) for linear parameter- varying (LPV) systems with input constraint. We estimate, at each time instant, a feasible set of all states which are consistent with system model, measurements and a priori information, rather than the state itself. By combining a state-feedback MPC and an SSE, we design an SSE-based MPC algorithm that stabilizes the closed-loop system. The proposed algorithm is solved by semi-de�nite program involving linear matrix inequalities. A numerical example is included to illustrate the performance of the proposed algorithm.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.3
• /
• pp.153-163
• /
• 2016

Local feature extraction methods for images and videos are widely applied in the fields of image understanding and computer vision. However, robust features are detected differently when using the latest feature detectors and descriptors because of diverse image environments. This paper analyzes various feature extraction methods by summarizing algorithms, specifying properties, and comparing performance. We analyze eight feature extraction methods. The performance of feature extraction in various image environments is compared and evaluated. As a result, the feature detectors and descriptors can be used adaptively for image sequences captured under various image environments. Also, the evaluation of feature detectors and descriptors can be applied to driving assistance systems, closed circuit televisions (CCTVs), robot vision, etc.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.31-36
• /
• 1997

Thermal expansion of the ball screw in semi-closed loop type CNC Lathe directly affects the position precision along the travel axis. In this paper, the thermal displacement of the ball screw is estimated by using macro variables. The estimated displacements of the ball screw are managed by calculating the interval of pitch error rate in the NC. The thermal behaviour of the ball screw of the CNC Lathe, under the constant operating conditions, was measured to examine the effectiveness of this compensation method. The results showed that thermal displacement of the ball screw could be maintained its accuracy better than 6${\mu}{\textrm}{m}$ while applying this method.