• The Journal of the Acoustical Society of Korea
• /
• v.11 no.6
• /
• pp.46-52
• /
• 1992

본 논문에서는 HMM 의 이산분포를 연속분포로 근사시키는 준 연속분포 HMM 에 의한 한국어 단어인식에 관하여 연구하였다. 이 모델의 생성과정에서는 입력벡터의 출력확률을 혼합 다차원 정규분 포로 가정하여 입력벡터의 확률함수와 코드위드의 심볼출력을 선형결합하므로써, 연속분포 모델로 근사 시켰으며, 단어인식과정에서는 생성모델에 의해 이산분포 모델에서 발생되는 양자와 왜곡을 감소시키므 로써 인식률을 향상시켰다. 이 방법을 평가하기 위하여 DDD 지역명을 대상으로 이산분포 HMM과 준연 속분포 HMM 의 비교실험을 수행하였다. 그 결과 준연속분포 HMM 에 의하여 이산분포 HMM 보다 향상된 인식률을 얻을 수 있었다.

• Annual Conference of KIPS
• /
• 2003.05b
• /
• pp.895-898
• /
• 2003

본 연구에서는 온톨로지를 이용한 SW-IQS(Semantic Web based Information Query System)를 제안한다. 제안한 시스템은 자동 분류 기술과 정보 검색 기법들을 이용하여 반구조(semi-structured) 문서뿐만 아니라 비구조(unstructured) 문서의 처리를 극대화시키고자 한다. 또한 상호 운용성 및 데이터 통합을 위해 RDF(S) 방식의 문서 저장 서버를 지원하며 웹 페이지들간에 검색 순위를 두어 보다 신속하고 정확한 정보 검색이 가능하도록 하고자 한다. 마지막으로 새로운 순위 측정 알고리즘을 제안하고 이를 이용한 성능 평가를 실시하여 그 효율성과 정확성을 검증해 보이고자 한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.468-473
• /
• 2010

This paper deals with approximate integral solutions to the one-dimensional model describing the charging process of stratified thermal storage tanks. Temperature is assumed to be the form of Fermi-Dirac distribution function, which can be separated to two sets of cubic polynomials for each hot and cold side of thermal boundary layers. Proposed approximate integral solutions are compared to the previous works of the approximate analytic solutions and show reasonable agreement. The approach, however, has benefits in mathematical difficulties, complicated solution form and unstable convergence of series solution founded in the previous analytic solutions. Solutions for a semi-infinite region, which have simple closed form solutions, give close agreement to those for a finite region. Thermocline thickness is obtained in closed form and shows proportional behavior to the square root of time and inverse proportional behavior to the square root of flow rate.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.47-52
• /
• 2009

In this study, it is demonstrated by a pseudo dynamic earthquake response tests that combination of semi-rigid partial-strength using the high performance-high strength bolts and inter-story hysteretic damper system creates a fairly good structural system that satisfies not only the serviceability requirement under moderate earthquakes but unexpected failure of damper system.

• Annual Conference of KIPS
• /
• 2004.11a
• /
• pp.673-676
• /
• 2004

본 연구에서는 온톨로지를 이용한 SW-IQS(Semantic Web based Information Query System)를 제안한다. 제안한 시스템은 자동 분류 기술과 정보 검색 기법들을 이용하여 반구조(semi-structured) 문서 뿐만 아니라 비구조(unstructured) 문서의 처리를 극대화 시키고자 한다. 또한 상호 운용성 및 데이터 통합을 위해 RDF(S) 방식의 문서 저장 서버를 지원하며 웹 페이지들간에 검색 순위를 두어 보다 신속하고 정확한 정보 검색이 가능하도록 하고자 한다. 마지막으로 새로운 순위 측정 알고리즘을 제안하고 이를 이용한 성능 평가를 실시하여 그 효율성과 정확성을 검증해 보이고자 한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1475-1483
• /
• 2006

This study was carried out to examine the optimum processing conditions of seasoned semi-dried oyster, and to investigate its food component characteristics. Three types of semi-dried oyster were prepared: semi-dried oyster prepared without seasoning and coating (C), seasoned semi-dried oyster without coating (S) and seasoned semi-dried oyster coated with alginate (SA). SA was high in moisture (48.6%), while low in lipid (2.8%), and crude protein (25.9%) compared to those of C and S. Hardness and sensory scores of SA were $209.8g/cm^2$ and $3.9\sim4.5$ points, respectively. Total amino acid content (24,299 mg/100 g) of SA was lower than that (27,181 mg/100 g) of C, and the major amino acids were aspartic acid, glutamic acid, leucine and Lysine. The major fatty acids of SA were 16:0 (25.5%) as saturates and EPA (23.5%) and DHA (9.3%) as polyenes. Calcium and phosphorus contents of SA were 42.6 mg/100 g and 245.5 mg/100 g, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.95-103
• /
• 2016

The objective of this study was to investigate feasibility of semi-dry anaerobic digestion using dairy cattle manure and to evaluate solidified fuel value of semi-dry anaerobic digestate. To evaluate semi-dry anaerobic digestion using dairy cattle manure, 950 mL bottle type anaerobic reactor was set in the constant temperature room maintained at $35^{\circ}C$. To produce anaerobic digestate for making solidified fuel, acrylic cylindrical anaerobic digester(1,000 mm width ${\times}$ 450 mm height) was set in the constant room temperature to carry out batch test of semi-dry anaerobic digestion using same dairy cattle manure. Moisture content of dairy cattle manure and inoculum solution for anaerobic digestion were 80.64% and 96.83%, respectively. The dairy cattle manure and the inoculum solution was mixed by 1:1 ratio(v/v) for anaerobic digestion. Water content and VS/TS(Volatile Solids/Total Solids) of mixture of substrate and inoculum were 89.74% and 83.35%, respectively. In case of non-inoculated anaerobic digester, the biogas was not produced. By the semi-dry anaerobic digestion, the calorific value of the digestate was reduced by 20% compare to fresh dairy cattle manure. In other hand, ash content increased from 15% to 18.4%. The contents of Cr, Pb, Cd and S of pellet produced from anaerobically digested dairy cattle manure were not against the standard regulation for livestock manure solidified fuel. Therefore, it can be used as fuel that anaerobic digestate produced after semi-dry anaerobic digestion using dairy cattle manure.

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.550-558
• /
• 2003

Digestion of primary sludge was conducted to evaluate the effects of reactor configuration using UAD, CUAD, TPAD, and semi-continuos CSTR. Highest VSS reduction and gas production were obtained in CUAD at all HRT. More efficient digestion was accomplished in upflow digesters compared to TPAD and CSTR. Higher thickening of solids in reactor and longer solids retention were main reasons for the enhanced digestion in CUAD and UAD. Performance based on the SRT of CUAD was nearly identical to that of UAD. However, those of TPAD and CSTR were lower than that of CUAD. Particulate and soluble organics in upflow reactors were well adsorbed due to secreted extracellular polymeric substances from the sludge granules. These might result in close proximity of microorganisms and substrates and enhanced hydrolysis. Additionally, diverse anaerobic microorganisms and neutral pH in upflow reactor could induce more activity of hydrolytic enzymes and sludge granules might offer lower thermodynamic energy state. While, excessive mixing in CSTR could break conglomerates of enzymes and substrates into fine particles, which resulted in lowered hydrolysis. Low pH level in acid fermenter of TPAD lowered hydrolysis of the particulate substrates.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.51-58
• /
• 2002

To reduce the story height for high-rise buildings, the TEC Beam is developed as a new composite beam composed of structural tee, precast concrete, stirrup, and site-in-cast reinforced concrete slab. The preliminary test of the proposed system was performed for simple beams and it showed a good behavior. However, for the field application of the system, it is required to develope a steel moment resisting connection using steel brackets on which upper rebars of the TEC BEAM are anchored. In this paper, three types of the proposed system are experimentally investigated. The parameters of the test are as follows: (1) the spacing of transverse bars, (2) the ratio of width of rebar's layer to bracket length. Specimens were classified as semi-rigid full strength by the Eurocode 4. It could be concluded that the proposed moment resisting system shows a good structural behavior and may be applicable in the filed.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.595-606
• /
• 2011

This study was conducted to investigate the seismic behavior of steel member resisting frames considering the relative stiffness of the connection and beams. Six-story steel moment frames were designed to study the seismic behavior. The connections were classified into Double Web-Angle connections (DWAs), Top- and Seat-angles with double Web-angles (TWSs), FEMA-Test Summary No. 28, Specimen ID: UCSD-6 (SAC), and Fully Restrained (FR). The rotational stiffness of the semi-rigid connections was estimated using the Three-Parameter Power Model adopted by Chen and Kishi. The relative stiffness, which is the ratio of the rotational stiffness of the connections to the stiffness of the beams, was used. Push-over, repeated loading, and time history analysis were performed for all the frames. The seismic behavior of each frame was analyzed with the story drift, plastic hinge rotation, and hysteretic energy distribution.