• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.85-92
• /
• 2017

PURPOSE. The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND METHODS. Shear bond strengths of different cements with various tooth surface treatments (none, etching, priming, or etching and priming) on enamel and dentin of human teeth were measured using the Swiss shear test design. Three adhesives (Permaflo DC, Panavia F 2.0, and Panavia V5) and one self-adhesive cement (Panavia SA plus) were included in this study. The interface of the cement and the tooth surface with the different pre-treatments was analyzed using SEM. pH values of the cements and primers were measured. RESULTS. The highest bond strength values for all cements were achieved with etching and primer on enamel ($25.6{\pm}5.3-32.3{\pm}10.4MPa$). On dentin, etching and priming produced the highest bond strength values for all cements ($8.6{\pm}2.9-11.7{\pm}3.5MPa$) except for Panavia V5, which achieved significantly higher bond strengths when pre-treated with primer only ($15.3{\pm}4.1MPa$). Shear bond strength values were correlated with the micro-retentive surface topography of enamel and the tag length on dentin except for Panavia V5, which revealed the highest bond strength with primer application only without etching, resulting in short but sturdy tags. CONCLUSION. The highest bond strength can be achieved for Panavia F 2.0, Permaflo DC, and Panavia SA plus when the tooth substrate is previously etched and the respective primer is applied. The new cement Panavia V5 displayed low technique-sensitivity and attained significantly higher adhesion of all tested cements to dentin when only primer was applied.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.90-97
• /
• 2008

이 연구는 Clearfil SE Bond를 거친 법랑질 표면에 적용할 때, 자가부식 프라이머의 적용방식 (능동적인 또는 수동적인)과 접착레진의 도포회수 (1회 또는 2회)가 법랑질의 결합강도에 미치는 영향을 알아보기 위하여 시행하였다. 16개의 발거된 대구치 치관의 협면이나 설면에서 법랑질 절편을 만들어 4개의 군으로 배정한 다음, 1군은 프라이머를 수동적으로 적용한 후 접착레진을 1회 도포하였고, 2군은 프라이머를 능동적으로 적용한 후 접착레진을 1회 도포하였고, 3군은 프라이머를 수동적으로 적용한 후 접착레진을 2회 도포하였고, 4군은 프라이머를 능동적으로 적용한 후 접착레진을 2회 도포하였다. 적용된 접착레진을 10초간 광조사한 후, 법랑질 표면에 2-3개의 Tygon tube를 위치시키고 Clearfil AP-X를 충전하고 40초간 광조사 하였다. Universal testing machine을 이용하여 법랑질 표면에서 복합레진이 파절될 까지 분당 1.0 mm의 cross-head speed로 전단하중을 가하고 통계적으로 분석하여 다음과 같은 결과를 얻었다. 거친 법랑질에 대한 Clearfil SE Bond의 미세전단 결합강도는 자가부식 프라이머의 적용방식 보다는 접착레진의 도포회수에 의해 증가할 수 있음을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제29권4호
• /
• pp.353-364
• /
• 2004

The purpose of this study was to compare and to evaluate the combination use of 5 kinds of dentin adhesive systems and 5 kinds of composite resins using micro-shear bond test. Five adhesive systems (Prime & Bond NT (PBN). Onecoat bond (OC), Excite (EX), Syntac (SY), Clearfil SE bond (CS)) and five composite resins (Spectrum (SP), Synergy Compact (SC), Tetric Ceram (TC), Clearfil AP-X (CA), Z100 (Z1)) were used for this study ($5{\;}{\times}{\;}5{\;}={\;}25group$, n =14/group). The slices of horizontally sectioned human tooth were bonded with each bonding system and each composite resin, and tested by a micro-shear bond strength test. These results were analyzed statistically. The mean micro-shear bond strength of dentin adhesive systems were in order of CS (22.642 MPa), SY (18.368 MPa), EX (14.599 MPa). OC (13.702 MPa). PBN (12.762 MPa). The mean bond strength of self-etching primer system group (CS, SY) in dentin was higher than that of self-priming adhesive system groups (PBN, EX, OC) significantly (P<0.05). The mean bond strength of composite resins was in order of SP (19.008 MPa), CA (17.532 MPa). SC (15.787 MPa), TC (15.068 MPa). Z1 (14.678 MPa). Micro-shear bond strength of SP was stronger than those of other composite resins significantly (P < 0.05). And those of TC and Z1 were weaker than other composite resins significantly (P < 0.05). No difference was found in micro-shear bond strength of composite resin in self-etching primer adhesive system groups (CS, SY) statistically. However, there was significant difference of micro-shear bond strength of composite resin groups in self-priming adhesive systems group (PBN, EX, OC). The combination of composite resin and dentin adhesive system recommended by manufacturer did not represent positive correlation. It didn't seem to be a significant factor.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2002년도 추계학술대회
• /
• pp.707-707
• /
• 2002

No Abstract, See Full Text

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.177-183
• /
• 2018

PURPOSE. The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP. MATERIALS AND METHODS. Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer's instructions. After storage in distilled water at $37^{\circ}C$ for 24 h, the bonded samples were sectioned longitudinally to produce $1.0{\times}1.0mm$ beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's post-hoc tests and the level of significance was set at 0.05. RESULTS. The lowest mean microtensile bond strength was obtained for the NACP group. Tukey's test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67). CONCLUSION. Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.133-140
• /
• 2008

이 실험의 목적은 Resilon으로 근관충전된 치아에서 자가산부식전처리제에 따른 치근단 미세누출을 평가하고자 함이다. 70개의 단근치를 사용하였고 .04 Taper ProFile을 사용하여 ISO #40까지 근관성형 하였다. 치아는 근관충전 재료와 자가산부식 전처리제에 따라서 15개씩 4개의 실험군과 5개씩 2개의 대조군으로 나누었다. 실험 치아는 치아 장축에 평행하게 잘라내어 염색액의 최대 침투 길이를 측정하였다. 통계분석은 One-way ANOVA test로 분석하였으며 Scheffe test로 사후검정 하였다. 실험결과 자가산부식전처리제를 사용한 2, 3, 4군 사이에서는 통계적으로 유의한 차이를 나타내지 않았다. 그러나 1군과 4군 사이에서는 통계적으로 유의한 차이가 나타났으며 (p < 0.05), 1군에서 가장 적은 치근단 미세누출을 나타냈다. 이 실험 결과에 따르면 Resilon으로 근관충전을 한 치아는 gutta percha와 $AH26^{(R)}$으로 근관충전한 치아와 비교했을 때 더 좋은 치근단 밀폐를 나타내지 않는다는 결론을 얻었으며, Resilon을 사용하여 근관충전을 한 경우에 자가산부식 전처리제의 차이에 따른 치근단 밀폐효과의 차이를 보이지 않는다는 결론을 얻었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.587.2-587
• /
• 2001

The purpose of this study is to evaluate influence of moisture control on bond strength of self-etching primer by measuring enamel and dentin shear bond strengths. 96 extracted human molars were divided into 8 groups. Group 1 (Enamel 30min Dry), Group 2 (E. 5s air dry), Group 3 (E. 1s air dry), Group 4 (E. blot dry), Group 5 (Dentin 30min Dry), Group 6 (D. 5s air dry), Group 7 (D. 1s air dry), Group 8 (D. blot dry) were divided.(omitted)

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.493-501
• /
• 2002

This study evaluated the microleakage performance of four self-etcing primer adhesives(Clearfil SE Bond, Clearfil Liner Bond 2, UniFil Bond, and FL Bond) and one self-etching adhesive(Prompt L-Pop). Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 50 extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of five adhesives and composite resins: Prompt L-Pop/Filtek Z 250(Group 1), Clearfil SE Bond/Clearfil AP-X(Group 2), Clearfil Liner Bond 2/Clearfil AP-X(Group 3), UniFil Bond/UniFil F(Group 4), and FL Bond/Filtek Z 250(Group 5). Following one day storage in room temperature water, the restored teeth were thermocycled for 500 cycles between 5$^{\circ}C$ and 55$^{\circ}C$. Marginal microleakage was assessed by dye penetration using 2% methylene blue dye. After 24 hours, the teeth were sectioned longitudinally and evaluated for microleakage under steromicroscope The data were statistically analysed by Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked tests. The results of this study were as follows ; 1. The microleakges at both enamel and dentinal mal$.$gins were the lowest in group 4. increasing among groups in the following order: group 2, follwed by group 5, follwed by group 1, and the highest in group 3. 2. At the enamel margins, the microleakage of group 3 was significantly higher than those of groups 2. 4 and 5(p<0.05), and also the microleakage of group 1 was statistically higher than those of groups 2 and 5(p<0.05). 3. At the dentinal margins, microleakage of group 3 was signincantly higher than microleakages of groups 1, 2, 4 and 5(p<0.05). 4. Compared with microleakages between the enamel and dentinal margins of each group, groups 1, 4 and 5 at enamel margin and group 2 and group 3 at dentinal margin were higher microleakage. But there was no significant difference between enamel and dentinal microleakages of each group(p>0.05).

• 대한치과의사협회지
• /
• 제41권10호통권413호
• /
• pp.702-709
• /
• 2003

• 대한소아치과학회지
• /
• 제44권4호
• /
• pp.419-426
• /
• 2017

맹출 장애 치료를 위해 교정력을 이용한 매복치의 맹출 유도를 시행하며, 이 과정 중 여러 원인에 의해 부착 실패가 일어날 수 있다. 이 연구의 목적은 산부식 레진 접착 시스템과 자가 산부식 접착 시스템을 이용하여 전단 결합 강도를 평가해보고, 접착 과정 중, 프라이머 도포 후 광중합 단계를 생략하여 시간 절약이 전단 결합 강도에 미치는 영향을 평가해보고자 하였다. 발거된 사람의 상악 전치부 40개 치아를 대상으로 I군과 II군은 산부식 후 프라이머로 Transbond$^{TM}$ XT Light cure Adhesive primer를 적용 하였으며 III군과 IV군은 Transbond$^{TM}$ Plus Self Etching primer을 적용 하였다. I군과 III군은 제조사의 지시 사항대로, II군과 IV군은 접착제 도포 후 광중합 단계를 줄여 부착을 시행하였다. 그 후 전단결합강도와 접착제 잔류 지수(Adhesive Remnant Index, ARI)를 이용하여 기록하였다. 전단결합강도는 I군, II군, III군 그리고 IV군 순으로 컸으며 대조군인 I군과 실험군 간에만 유의차가 있었다(p < 0.05). ARI 지수는 I군, III군, IV군 그리고 II군 순으로 대조군에서 치면과 레진 사이의 결합력이 컸다. 대조군이 유의하게 전단결합강도가 높았으나 다른 군에서도 임상적으로 유용한 전단결합강도를 가진다.