• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.7-12
• /
• 2002

The purpose of this study is to design and to apply the self-compaction concrete mixture to field, having not only high strength but also compensation for shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test, hydration heat analysis were performed. As a results, when Cement is replaced with 35% limestone Powder, 6% CSA expansive additives at unit water 175kg/$m^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished in the field application.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.135-138
• /
• 2003

The purpose of this study was to design the self-compaction concrete mixture, having not only high strength but also compensation of shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test, hydration heat analysis were performed. As a results, when 35% of limestone Powder, 6% CSA expansive additives are replaced at unit water 175kg/$\textrm{m}^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.85-88
• /
• 2004

The purpose of this study was to design the self-compaction concrete mixture, having not only high strength but also compensation of shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test. hydration heat analysis were performed. As a results, when 35% of limestone Powder, 6% CSA expansive additives are replaced at unit water 175kg/$\textrm{m}^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.235-242
• /
• 2019

이 연구의 목적은 단면확대 보강을 위해 개발된 폴리머와 초속경 시멘트를 혼입한 콘크리트의 자기 충전성 확보를 위한 배합상세 수정이다. 보강용 콘크리트의 자기충전성은 일본토목학회(JSCE 1999)와 유럽통합기준(EFNARC 2002)에서 제시된 자기충전 콘크리트의 굳기 전 물성시험 및 성능기준을 통해 평가하였다. 실험결과, 동일한 물-결합재 비에서 단위 결합재양을 증가(페이스트 부피비 증가)시키면, 점성이 증가 하지만, 단위수량도 증가하여 점성에 의한 유동성 저하는 없었다. 단면확대 보강용 콘크리트를 위해 개발된 결합재를 이용한 일반강도 콘크리트 배합 시 자기다짐 성능을 확보하기 위한 배합조건은 물-결합재비 38%에서 단위결합재양은 $430kg/m^3{\sim}470kg/m^3$, 잔골재율은 40%~46% 수준이 추천될 수 있었다.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.397-403
• /
• 2009

This study was carried out to investigate the present status of subsoil compaction, and subsoil compaction management in orchard as a basic study for developing a self-propelled explosive subsoiler. Subsoil compaction was evaluated using the soil penetration resistance. Soil cone index was measured using the DIK 5520 type cone penetrometer in several fruit farms such as apple, pear, peach and grapes during growing seasons of these fruit in Jecheon, Gamgok, Choongju, Cheonan and Hwasung areas. Most of the subsoil managing machinery were either explosive type or digging type attached to the tractor or power tiller and turning radius of this machine was more than 3-5 m. Many of the farmers wanted to use the subsoiler which can put lime into soil and rupture soil at the same time. For most of the orchard fields, soil penetration resistance in vehicle traffic area was increased quickly and reached about 1.0 MPa in 5 cm soil depth. As the soil depth increased to 15-20 cm, cone penetration resistance reached about 2.0-2.5 MPa which restricted root growth seriously. Thus it was concluded that one of the main reason for increasing the soil compaction in orchard fields is agricultural vehicle traffic. In the vicinity of fruit trees, compaction is not so serious compared to that of the vehicle traffic area, but as the soil depth increased to 20-25 cm, in most of the orchard fields soil penetration resistance reached about 2.0-2.5 MPa which is the root growth-limiting value. Considering the rooting depth of fruit trees which ranged 30-60 cm for apple, pear and peach, and 20-30 cm for grape, it is necessary to loosen the subosoil and improve the subsoil conditions using subsoiler.

• 한국건축시공학회지
• /
• 제3권3호
• /
• pp.91-97
• /
• 2003

At present, the antiwashout underwater concretes are used as popular construction materials in European countries, the United States and Japan. The water-soluble polymers in the antiwashout underwater concretes provide excellent segregation or washout resistance, self-compaction and self-leveling property to the concretes. The purpose of this study is to recommend to optimum mix proportions of antiwashout underwater concretes according to compressive strength of 300kgf/$\textrm{cm}^2$ to 500kgf/$\textrm{cm}^2$. The antiwashout underwater concretes are prepared with various unit cement content, unit water content, sand-aggregate ratio, unit antiwashout agent and superplasticizer content. And they are tested for flowability, and compressive strength. From the test results, it is possible to recommend the optimum mix proportions of antiwashout underwater concretes according to compressive strengths within the range of 300kgf/$\textrm{cm}^2$ to 500kgf/$\textrm{cm}^2$.

• 한국지반환경공학회 논문집
• /
• 제10권5호
• /
• pp.11-18
• /
• 2009

지하매설관 설치시 매설관 아래의 베딩면 상부 되메움재는 적절한 다짐이 필요하다. 그러나 원형매설관 설치시 기존 시공법의 경우는 관 하부의 다짐이 어렵고, 또한 다짐효율이 떨어져서 지하매설관의 안정성을 저감시키며, 이로 인하여 매설관의 파손이 발생한다. 이러한 지하매설관 되메움시 발생하는 문제점을 해결할 수 있는 방법 중의 하나가 유동성 채움재(CLSM)를 이용하는 것이다. 유동성 채움재는 저강도 콘크리트 개념을 지반공학에 적용하여 만들어진 것이다. 이의 대표적인 특성은 자기수평화(self-leveling), 자기다짐(self-compacting), 유동성(flowablility), 인위적인 강도조절, 시공단계를 줄여 시공비 절감이 가능하다는 것이다. 따라서, 본 논문에서는 유한요소해석을 수행하여 동일한 조건에서 현장발생토, 일반모래, 유동성채움재를 되메움재로 사용하였을 경우의 거동을 비교 분석하였다. 그 결과 되메움재로 유동성채움재를 사용하는 경우가 현장발생토사나 일반모래를 사용한 경우보다 지표침하 및 매설관의 변위를 감소시키는 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.10-15
• /
• 2011

PURPOSE. This study investigated the influence of bone quality and surgical technique on the implant stability quotient (ISQ) value. In addition, the influence of interfacial bone quality, directly surrounding the implant fixture, on the resonance frequency of the structure was also evaluated by the finite element analysis. MATERIALS AND METHODS. Two different types of bone (type 1 and type 2) were extracted and trimmed from pig rib bone. In each type of bone, the same implants were installed in three different ways: (1) Compaction, (2) Self-tapping, and (3) Tapping. The ISQ value was measured and analyzed to evaluate the influence of bone quality and surgical technique on the implant primary stability. For finite element analysis, a three dimensional implant fixture-bone structure was designed and the fundamental resonance frequency of the structure was measured with three different density of interfacial bone surrounding the implant fixture. RESULTS. In each group, the ISQ values were higher in type 1 bone than those in type 2 bone. Among three different insertion methods, the Tapping group showed the lowest ISQ value in both type 1 and type 2 bones. In both bone types, the Compaction groups showed slightly higher mean ISQ values than the Self-tapping groups, but the differences were not statistically significant. Increased interfacial bone density raised the resonance frequency value in the finite element analysis. CONCLUSION. Both bone quality and surgical technique have influence on the implant primary stability, and resonance frequency has a positive relation with the density of implant fixture-surrounding bone.

• Journal of Microbiology
• /
• 제40권4호
• /
• pp.319-326
• /
• 2002

Cellular DNA in prokaryotes is organized in nucleic acid-protein self-assemblies referred to as the nucleoid. The physical forces responsible for its stability inside the poor solvent properties of the cytoplasm and their functional implications are not understood. Studies on the organisation and functioning of the cytosol of cells largely rely on experimental protocols performed in highly dilute solutions using biochemically purified molecules, which is not a reliable substitute for the situation existing in vivo. Our current research interest is focused on the characterization of biological and physical forces determining the compaction and phase separation of DNA in Escherichia coli cytoplasm. We have emphasized the effect of excluded volume in solutions with high macromolecular concentrations (macromolecular crowding) upon self-association patterns of reactions. The prokaryotic cytosol was simulated by addition of inert polymer polyethylene glycol (PEG) (average molecular weight 20000), as an agent which afterwards facilitates the self-association of macromolecules. Fluorescence microscopy was used for direct visualization of nucleoids in intact cells, after staining with DAPI (4',6-diamidino-2-phenylindole dihydrochloride). Addition of the crowding agent PEG 20,000, in increasing concentrations generated progressively enhanced nucleoid compaction, the effect being stronger in the presence of 0.2 M NaCl and 5 mM MgCl$\_$2/. Under these conditions, the nucleoids were compacted to volumes of around 2 ㎛$\^$3/ or comparable sizes with that of living cells.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.65-73
• /
• 2013

PURPOSES : As a research to develop a cement treated base course for an airport pavement which can enhance its drainage, this paper investigated the strength, infiltration performance and durability of the pervious concrete with respect to maximum coarse aggregate sizes and compaction methods. METHODS : This study measured compressive strength, infiltration rate, continuous porosity and freeze-thaw resistance of pervious concrete specimens, which were fabricated with five different compaction methods and different maximum aggregate sizes. In addition, in order to reduce the usage of Portland cement content and to enhance environment-friendliness, a portion of the cement was replaced with Ground Granulated Blast Furnace Slag (GGBS). RESULTS: Compressive strength requirement, 5 MPa at 7 days, was met for all applied compaction methods and aggregate sizes, except for the case of self-compaction. Infiltration rate became increased as the size of aggregate increased. The measured continuous porosities varied with the different compaction methods but the variation was not significant. When GGBS was incorporated, the strength requirement was successfully satisfied and the resistance to freezing-thawing was also superior to the required limit. CONCLUSIONS: The infiltration rate increased as the maximum size of aggregate increased but considering construct ability and supply of course aggregate, its size is recommended to be 25mm. With the suggested mix proportions, the developed pervious concrete is expected to successfully meet requirements for strength, drainage and durability for cement treated base or subbase course of an airport pavement.